Dallas College Catalog filtered for Mountain View Campus
2020 - 2021 Dallas College Catalog
Catalog Filter(s): Mountain View Campus (remove)

2020 - 2021 Catalog
Program: Welding Technology


WELDING TECHNOLOGY - GAS METAL ARC WELDING (GMAW)

(Level 1 Certificate)

Eastfield and Mountain View campus only

  • Students pursuing this certificate are waived from the Texas Success Initiative (TSI) standards, but must meet course prerequisites.
  • Complete at least 25% of the credit hours required for graduation through instruction by Dallas College.

Degree Plan Code: C1.WLDG.GMAW

The Gas Metal Arc Welding (GMAW) certificate program is designed to qualify students in the gas metal welding processes on either plate or pipe in accordance to the American Welding Society (AWS) or the American Petroleum Institute (API) welding procedures. These courses can be offered concurrently as CEU courses.

The certificate program provides learning experiences and/or capstone experiences in accordance to AWS D1.1 or API 1104 certifications.

Course Course Title Credit Hours
WLDG 1430 Introduction to Gas Metal Arc Welding (GMAW) 4
WLDG 1428 Introduction to Shielded Metal Arc Welding (SMAW) 4
Semester Total 8
Course Course Title Credit Hours
WLDG 2447 Advanced Gas Metal Arc Welding (GMAW) 4
WLDG 1471 Welding Qualifications 4
Semester Total 8
Minimum Hours Required 16

NOTE: Students enrolling in this program who plan to transfer to a four-year institution should consult an advisor or counselor regarding transfer requirements and the transferability of these courses to the four-year institution of their choice.

[Back to Top]



WELDING TECHNOLOGY - GAS TUNGSTEN ARC WELDING (GTAW)

(Level 1 Certificate)

Eastfield and Mountain View campus only

  • Students pursuing this certificate are waived from the Texas Success Initiative (TSI) standards, but must meet course prerequisites.
  • Complete at least 25% of the credit hours required for graduation through instruction by Dallas College.

Degree Plan Code: C1.WLDG.GTAW

The Gas Tungsten Arc Welding (GTAW) certificate program is designed to qualify students in the gas tungsten welding processes on either plate or pipe in accordance to the American Welding Society (AWS) or the American Petroleum Institute (API) welding procedures. These courses can be offered concurrently as CEU courses.

The certificate program provides learning experiences and/or capstone experiences in accordance to AWS D1.1 or API 1104 certifications.

Course Course Title Credit Hours
WLDG 1434 Introduction to Gas Tungsten Arc (GTWA) Welding 4
WLDG 1425 Introduction to Oxy-Fuel Welding and Cutting 4
Semester Total 8
Course Course Title Credit Hours
WLDG 2451 Advanced Gas Tungsten Arc Welding (GTAW) 4
WLDG 1471 Welding Qualifications 4
Semester Total 8
Minimum Hours Required 16

NOTE: Students enrolling in this program who plan to transfer to a four-year institution should consult an advisor or counselor regarding transfer requirements and the transferability of these courses to the four-year institution of their choice.

[Back to Top]


MACHINIST CERTIFICATE

(Level 1 Certificate)

Mountain View campus only

  • Students pursuing this certificate are waived from the Texas Success Initiative (TSI) standards, but must meet course prerequisites.
  • Complete at least 25% of the credit hours required for graduation through instruction by Dallas College.

Degree Plan Code: C1.WLDG.MACHIN.17

Students will acquire the necessary skills to perform a wide variety of manual and CNC machining operations involving both, vertical milling and turning equipment. Upon completion of this award, students will be able to interpret engineer drawings, make the necessary calculations, and then independently plan and carry out most common machining tasks with proficiency and within industry-standard timeframes.

Course Course Title Credit Hours
MCHN 1438 Basic Machine Shop 1 4
MCHN 1326 Introduction to Computer-Aided Manufacturing (CAM) 3
Semester Total 7
Course Course Title Credit Hours
MCHN 1454 Intermediate Machining 2 4
MCHN 2338 Advanced Computer-Aided Manufacturing (CAM) 3
MCHN 2441 Advanced Machining 1 4
Semester Total 11
Minimum Hours Required 18

[Back to Top]



WELDING TECHNOLOGY - SHIELDED METAL ARC WELDING (SMAW)

(Level 1 Certificate)

Eastfield and Mountain View campus only

  • Students pursuing this certificate are waived from the Texas Success Initiative (TSI) standards, but must meet course prerequisites.
  • Complete at least 25% of the credit hours required for graduation through instruction by Dallas College.

Degree Plan Code: C1.WLDG.SMAW

The Shielded Metal Arc Welding (SMAW) certificate program is designed to qualify students in the shielded metal arc welding processes on either plate or pipe in accordance to the American Welding Society (AWS) or the American Petroleum Institute (API) welding procedures. These courses can be offered concurrently as CEU courses.

The certificate program provides learning experiences and/or capstone experiences in accordance to AWS D1.1 or API 1104 certifications.

Course Course Title Credit Hours
WLDG 1428 Introduction to Shielded Metal Arc Welding (SMAW) 4
WLDG 1457 Intermediate Shielded Metal Arc Welding (SMAW) 4
Semester Total 8
Course Course Title Credit Hours
WLDG 2443 Advanced Shielded Metal Arc Welding (SMAW) 4
WLDG 1471 Welding Qualifications 4
Semester Total 8
Minimum Hours Required 16

NOTE: Students enrolling in this program who plan to transfer to a four-year institution should consult an advisor or counselor regarding transfer requirements and the transferability of these courses to the four-year institution of their choice.

[Back to Top]


WELDING TECHNOLOGY

(Associate of Applied Science Degree)

Mountain View campus only

  • Students pursuing this award program are required to meet Texas Success Initiative (TSI) standards and course prerequisites.
  • Complete at least 25% of the credit hours required for graduation through instruction by Dallas College.

Degree Plan Code: AAS.WELDING.TECH.21

The Welding Technology program is designed to prepare the student in the basic processes of oxyacetylene and arc welding plus many specialized welding applications as options to fit the specific needs of the student. In addition, instruction is offered in related support areas such as metallurgy, tooling, drafting, pattern layout, and characteristics of materials. Thus the program offers preparation for both entry-level jobs as well as welding inspectors.

The student will be required to purchase a basic set of tools which will be used in class and later on the job. Tool lists will be given out by the instructor during the first week of classes.

Course Course Title Credit Hours
WLDG 1200 Introduction to Welding 2
WLDG 1425 Introduction to Oxy-fuel Welding and Cutting 4
WLDG 1428 Introduction to Shielded Metal Arc Welding (SMAW) 4
ENGL 1301 Composition 1 3
Semester Total 13
Course Course Title Credit Hours
WLDG 1337 Introduction to Welding Metallurgy 3
WLDG 1457 Intermediate Shielded Metal Arc Welding (SMAW) 4
WLDG 1430 Introduction to Gas Metal Arc Welding (GMAW) 4
SPCH 1311 Introduction to Speech Communication 3
+Elective Humanities/Fine Arts 3
Semester Total 17
Course Course Title Credit Hours
PSYC 2301 General Psychology 3
WLDG 1434 Introduction to Gas Tungsten Arc (GTAW) Welding 4
DFTG 1425 Blueprint Reading and Sketching OR 4
WLDG 1471 Welding Qualifications (4)
WLDG 2443 Advanced Shielded Metal Arc Welding (SMAW) 4
Semester Total 15
Course Course Title Credit Hours
WLDG 1480 Cooperative Education-Welding Technology/Welder OR 4
NDTE 2411 Preparation for Certified Welding Inspector Exam (4)
MATH 1332 Contemporary Mathematics (Quantitative Reasoning) 3
WLDG 2447 Advanced Gas Metal Arc Welding (GMAW) 4
WLDG 2451 Advanced Gas Tungsten Arc Welding (GTAW) 4
Semester Total 15
Minimum Hours Required 60

+Humanities/Fine Arts Elective - must be selected from the AAS Core Options for Humanities/Fine Arts.

NOTE: Students enrolling in this program who plan to transfer to a four-year institution should consult an advisor or counselor regarding transfer requirements and the transferability of these courses to the four-year institution of their choice.

[Back to Top]