2015 - 2016 Combined Catalogs of the Colleges

Program: Automotive Technology


AUTOMOTIVE TECHNOLOGY -- CHASSIS SERVICE TECHNICIAN

(Level I Certificate)

Brookhaven, Cedar Valley and Eastfield only

  • Students pursuing this certificate are waived from the Texas Success Initiative (TSI) standards, but must meet course prerequisites.
  • Students must earn at least 25% of the credit hours required for graduation through instruction by the college awarding the degree.

Degree Plan Code: C1.AUMT.CHASSIS

CREDIT HOURS

SEMESTER I

AUMT 1305 Introduction to Automotive Technology 3
AUMT 1307 Automotive Electrical Systems 3
AUMT 1310 Automotive Brake Systems 3
AUMT 1316 Automotive Suspension and Steering Systems 3
+Elective Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3
15
Minimum Hours Required 15

+Elective--a minimum of three credit hours of cooperative work experience courses must be selected from the following:

AUMT 1380 Cooperative Education - Automobile/Automotive Mechanics Technology/Technician 3
AUMT 2380 Cooperative Education - Automobile/Automotive Mechanics Technology/Technician 3

NOTE: Some students enrolling in this program may plan to transfer to four-year institutions. They should consult with an advisor or counselor regarding transfer requirements and to identify how courses will transfer to the four-year institution of their choice.

[Back to Top]


AUTOMOTIVE TECHNOLOGY -- DEALERSHIP SPONSORED TECHNICIAN

(Associate in Applied Sciences Degree)

Brookhaven only

  • Students pursuing this award program are required to meet Texas Success Initiative (TSI) standards and course prerequisites.
  • Students must earn at least 25% of the credit hours required for graduation through instruction by the college awarding the degree.

Degree Plan Code: AAS.AT.DEALERSHIP

This specialized program is designed to prepare students for entry level employment as Automotive technicians in specific manufacturer's dealership service organizations. Students entering this program must be sponsored by participating dealerships approved by the College. Emphasis is placed upon the development of the necessary skills and knowledge required to function in Automotive dealerships repairing and maintaining late model Automobiles with electronic systems. This program includes operational theory, practical skills, and accepted shop procedures reinforced by intensive practice during cooperative work experience periods in the sponsoring dealership.

CREDIT HOURS
FORD ASSET TRACK:

SEMESTER I

AUMT 1305 Introduction to Automotive Technology 3
AUMT 1307 Automotive Electrical Systems 3
AUMT 1310 Automotive Brake Systems 3
AUMT 1316 Automotive Suspension and Steering Systems 3
++++Elective Cooperative Education-Automobile/Automotive Mechanics Technology/Technician OR 2
++++Elective Cooperative Education-Automobile/Automotive Mechanics Technology/Technician (2)
14

SEMESTER II

AUMT 1319 Automotive Engine Repair 3
AUMT 2317 Automotive Engine Performance Analysis I 3
AUMT 2334 Automotive Engine Performance Analysis II 3
AUMT 2321 Automotive Electrical Diagnosis and Repair 3
++++Elective Cooperative Education-Automobile/Automotive Mechanics Technology/Technician OR 2
++++Elective Cooperative Education-Automobile/Automotive Mechanics Technology/Technician (2)
14

SEMESTER III

AUMT 1345 Automotive Climate Control Systems 3
AUMT 2313 Automotive Drive Train and Axles 3
AUMT 2325 Automotive Automatic Transmission and Transaxle 3
AUMT 2332 Automotive Automatic Transmissions and Transaxles II 3
AUMT 1391 Special Topics in Auto/Automobile Mechanic/Technician 3
++++Elective Cooperative Education-Automobile/Automotive Mechanics Technology/Technician OR 2
++++Elective Cooperative Education-Automobile/Automotive Mechanics Technology/Technician (2)
17

SEMESTER IV

ENGL 1301 Composition I 3
SPCH 1311 Introduction to Speech Communication OR 3
SPCH 1315 Public Speaking (3)
+Elective MATH Elective 3
++Elective Social/Behavioral Science 3
+++Elective Humanities/Fine Arts 3
15
FORD ASSET MINIMUM REQUIRED HOURS:
60

 

GM ASEP TRACK:

SEMESTER I

AUMT 1305 Introduction to Automotive Technology 3
AUMT 1307 Automotive Electrical Systems 3
AUMT 1310 Automotive Brake Systems 3
AUMT 1316 Automotive Suspension and Steering Systems 3
++++Elective Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3
15

SEMESTER II

AUMT 1319 Automotive Engine Repair 3
AUMT 2317 Automotive Engine Performance Analysis I 3
AUMT 2334 Automotive Engine Performance Analysis II 3
AUMT 2321 Automotive Electrical Diagnosis and Repair 3
++++Elective Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3
15

SEMESTER III

AUMT 1345 Automotive Climate Control Systems 3
AUMT 2313 Automotive Drive Train and Axles 3
AUMT 2325 Automotive Automatic Transmission and Transaxle 3
AUMT 1391 Special Topics in Auto/Automobile Mechanic/Technician 3
++++Elective Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3
15

SEMESTER IV

ENGL 1301 Composition I 3
SPCH 1311 Introduction to Speech Communication OR 3
SPCH 1315 Public Speaking (3)
+Elective MATH Elective 3
++Elective Social/Behavioral Science 3
+++Elective Humanities/Fine Arts 3
15
GM ASEP MINIMUM REQUIRED HOURS:
60

+MATH Elective - must be selected from the AAS Core Options for Mathematics.

++Social/Behavioral Elective - must be selected from the AAS Core Options for Social/Behavioral Sciences.

+++Humanities/Fine Arts Elective - must be selected from the AAS Core Options for Humanities/Fine Arts.

++++Elective-Students enrolled in the Ford ASSET Track are required a minimum of six credit hours of cooperative work experience for graduation. Students must select to complete the cooperative work experience through the completion of three (3) two-credit hour courses or two (2) three-credit hour courses. The courses must be selected from the following list:

AUMT 1281 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 2
AUMT 2280 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 2
AUMT 2281 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 2
AUMT 2380 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3
AUMT 2381 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3

++++Elective-Students enrolled in the GM ASEP Track are required a minimum of nine credit hours of cooperative work experience for graduation. Students must select to complete the cooperative work experience through the completion of three (3) three-credit hour courses. The courses must be selected from the following list:

AUMT 1380 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3
AUMT 1381 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3
AUMT 2380 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3
AUMT 2381 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3

NOTE: Some students enrolling in this program may plan to transfer to four- year institutions. They should consult with an advisor or counselor regarding transfer requirements and to identify how courses will transfer to the four year institution of their choice.

[Back to Top]


AUTOMOTIVE TECHNOLOGY -- ELECTRONICS AND CLIMATE CONTROLS TECHNICIAN

(Level I Certificate)

Brookhaven, Cedar Valley and Eastfield only

  • Students pursuing this certificate are waived from the Texas Success Initiative (TSI) standards, but must meet course prerequisites.
  • Students must earn at least 25% of the credit hours required for graduation through instruction by the college awarding the degree.

Degree Plan Code: C1.AUMT.ELEC.CLIM

CREDIT HOURS

SEMESTER I

AUMT 1305 Introduction to Automotive Technology 3
AUMT 1307 Automotive Electrical Systems 3
AUMT 2321 Automotive Electrical Diagnosis and Repair 3
9

SEMESTER II

AUMT 1345 Automotive Climate Control Systems 3
+Elective Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3
6
Minimum Hours Required 15

+Elective - a minimum of three credit hours of cooperative work experience courses must be selected from the following list:

AUMT 1381 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3
AUMT 2381 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3

NOTE: Some students enrolling in this program may plan to transfer to four-year institutions. They should consult with an advisor or counselor regarding transfer requirements and to identify how courses will transfer to the four-year institution of their choice.

[Back to Top]


AUTOMOTIVE TECHNOLOGY -- ENGINE REPAIR AND PERFORMANCE TECHNICIAN

(Level I Certificate)

Brookhaven, Cedar Valley and Eastfield only

  • Students pursuing this certificate are waived from the Texas Success Initiative (TSI) standards, but must meet course prerequisites.
  • Students must earn at least 25% of the credit hours required for graduation through instruction by the college awarding the degree.

Degree Plan Code: C1.AUMT.ENGINE.PERF

CREDIT HOURS

SEMESTER I

AUMT 1305 Introduction to Automotive Technology 3
AUMT 1319 Automotive Engine Repair 3
AUMT 1307 Automotive Electrical Systems 3
9

SEMESTER II

AUMT 2321 Automotive Electrical Diagnosis and Repair 3
AUMT 2317 Automotive Engine Performance Analysis I 3
AUMT 2334 Automotive Engine Performance Analysis II 3
+Elective Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 2-3
11-12
Minimum Hours Required 20-21

+Elective - a minimum of two credit hours of cooperative work experience courses must be selected from the following:

AUMT 1281 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 2
AUMT 1381 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3
AUMT 2281 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 2
AUMT 2381 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3

NOTE: Some students enrolling in this program may plan to transfer to four-year institutions. They should consult with an advisor or counselor regarding transfer requirements and to identify how courses will transfer to the four-year institution of their choice.

[Back to Top]


AUTOMOTIVE TECHNOLOGY -- HIGH PERFORMANCE MODIFICATION



(Level I Certificate)

Eastfield only

  • Students pursuing this certificate are waived from the Texas Success Initiative (TSI) standards, but must meet course prerequisites.
  • Students must earn at least 25% of the credit hours required for graduation through instruction by the college awarding the degree.

Degree Plan Code: C1.AUMT.HIGH.PERF

The High Performance Modification Certificate will prepare students for entry-level positions as automotive technicians addressing high performance engine maintenance and repair. The program will present theory, hands-on experience and the opportunity to learn how to use an All-Wheel Drive chassis Dyno for demonstrating and testing their knowledge and skill in high performance engine modifications.

CREDIT HOURS

SEMESTER I

AUMT 1305 Introduction to Automotive Technology 3
AUMT 1307 Automotive Electrical Systems 3
AUMT 1319 Automotive Engine Repair 3
9

SEMESTER II

AUMT 2317 Automotive Engine Performance Analysis I 3
AUMT 2455 Automotive Engine Machining 4
AUMT 1491 Special Topics in Auto/Automotive Mechanic/Technician 4
11
Minimum Hours Required 20

NOTE: Some students enrolling in this program may plan to transfer to four-year institutions. They should consult with an advisor or counselor regarding transfer requirements and to identify how courses will transfer to the four-year institution of their choice.

[Back to Top]


AUTOMOTIVE TECHNOLOGY -- HONDA PROFESSIONAL AUTOMOTIVE CAREER TRAINING

(Associate in Applied Sciences Degree)

Eastfield only

  • Students pursuing this award program are required to meet Texas Success Initiative (TSI) standards and course prerequisites.
  • Students must earn at least 25% of the credit hours required for graduation through instruction by the college awarding the degree.

Degree Plan Code: AAS.AT.HONDA.PROF

This specialized program is designed to prepare students for entry-level employment as Automotive technicians in Honda/Acura dealership service organizations. Sponsorship at a Honda/Acura dealer is not required to begin the program, but completion of the program is contingent on obtaining and sustaining sponsorship at a Honda/Acura dealer. Emphasis is placed upon the development of the necessary skills and knowledge required to function in Honda/Acura dealerships repairing and maintaining Honda/Acura mode automobiles with electronic systems. This program includes operational theory, practical skills, and accepted shop procedures reinforced by intensive practice during cooperative work experience periods in the sponsoring dealership.

CREDIT HOURS

SEMESTER I

AUMT 1305 Introduction to Automotive Technology 3
AUMT 1307 Automotive Electrical Systems 3
AUMT 1312 Basic Automotive Service 3
ENGL 1301 Composition I 3
12

SEMESTER II

AUMT 1316 Automotive Suspension and Steering Systems 3
AUMT 1310 Automotive Brake Systems 3
AUMT 2311 Automotive Electronic Controls 3
SPCH 1311 Introduction to Speech Communication 3
12

SEMESTER III

AUMT 1306 Automotive Engine Removal and Installation 3
AUMT 1319 Automotive Engine Repair 3
+Elective MATH Elective 3
9

SEMESTER IV

AUMT 1345 Automotive Climate Control Systems 3
AUMT 2317 Automotive Engine Performance Analysis I 3
AUMT 2321 Automotive Electrical Diagnosis and Repair 3
AUMT 2334 Automotive Engine Performance Analysis II 3
++Elective Humanities/Fine Arts 3
15

SEMESTER V

AUMT 2325 Automotive Automatic Transmission and Transaxle 3
AUMT 2313 Automotive Drive Train and Axles 3
AUMT 2380 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3
+++Elective Social/Behavioral Science 3
12
Minimum Hours Required 60

+MATH Elective - must be selected from the AAS Core Options for Mathematics.

++Humanities/Fine Arts Elective - must be selected from the AAS Core Options for Humanities/Fine Arts.

+++Social/Behavioral Science Elective - must be selected from the AAS Core Options for Social/Behavioral Sciences.

NOTE: Some students enrolling in this program may plan to transfer to four- year institutions. They should consult with an advisor or counselor regarding transfer requirements and to identify how courses will transfer to the four year institution of their choice.

[Back to Top]


AUTOMOTIVE TECHNOLOGY -- SERVICE TECHNICIAN

(Associate in Applied Sciences Degree)

Brookhaven only

  • Students pursuing this award program are required to meet Texas Success Initiative (TSI) standards and course prerequisites.
  • Students must earn at least 25% of the credit hours required for graduation through instruction by the college awarding the degree.

Degree Plan Code: AAS.AT.SERVICE.TECH

The purpose of this program is to prepare students for entry level employment as an automotive technician. This program reflects a building-block approach from simple to complex and includes theory, diagnosis, repair and maintenance of automobiles, including late model vehicles with electronic systems. Emphasis is placed on operational theory, practical skills and accepted shop procedures.

CREDIT HOURS

SEMESTER I

AUMT 1305 Introduction to Automotive Technology 3
AUMT 1307 Automotive Electrical Systems 3
AUMT 2321 Automotive Electrical Diagnosis and Repair 3
SPCH 1311 Introduction to Speech Communication 3
12

SEMESTER II

AUMT 1310 Automotive Brake Systems 3
AUMT 1316 Automotive Suspension and Steering Systems 3
+Elective MATH Elective 3
9

SEMESTER III

AUMT 1345 Automotive Climate Control Systems 3
AUMT 1319 Automotive Engine Repair 3
ENGL 1301 Composition I 3
9

SEMESTER IV

AUMT 2317 Automotive Engine Performance Analysis I 3
AUMT 2334 Automotive Engine Performance Analysis II 3
AUMT 1391 Special Topics in Auto/Automobile Mechanic/Technician 3
++Elective Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3
+++Elective Social/Behavioral Sciences 3
15

SEMESTER V

AUMT 2313 Automotive Drive Train and Axles 3
AUMT 2325 Automotive Automatic Transmission and Transaxle 3
AUMT 2332 Automotive Automatic Transmission and Transaxle II 3
++Elective Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3
++++Elective Humanities/Fine Arts 3
15
Minimum Hours Required 60

+MATH Elective - must be selected from the AAS Core Options for Mathematics.

++Elective - Students are required a minimum of six credit hours of cooperative work experience for graduation. Students must select to complete the cooperative work experience through the completion of three (3) two-credit hour courses. If a student selects this option, the student will need to begin the courses by the fourth semester of the degree. Students choosing to complete the cooperative work experience requirement by completing two (2) three-credit hour courses should wait until their last two semesters of course work. The courses must be selected from the following list:

AUMT 1281 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 2
AUMT 2280 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 2
AUMT 2380 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3
AUMT 2281 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 2
AUMT 2381 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3

+++Social/Behavioral Science Elective - must be selected from the AAS Core Options for Social/Behavioral Sciences.

++++Humanities/Fine Arts Elective - must be selected from the AAS Core Options for Humanities/Fine Arts.

NOTE: Students enrolling in this program who plan to transfer to a four-year institution should consult an advisor or counselor regarding transfer requirements and the transferability of these courses to the four year institution of their choice.

[Back to Top]


AUTOMOTIVE TECHNOLOGY -- SERVICE TECHNICIAN

(Associate in Applied Sciences Degree)

Cedar Valley and Eastfield only

  • Students pursuing this award program are required to meet Texas Success Initiative (TSI) standards and course prerequisites.
  • Students must earn at least 25% of the credit hours required for graduation through instruction by the college awarding the degree.

Degree Plan Code: AAS.AT.SERV.TECH

The purpose of this program is to prepare students for entry level employment as an automotive technician. This program reflects a building-block approach from simple to complex and includes theory, diagnosis, repair and maintenance of automobiles, including late model vehicles with electronic systems. Emphasis is placed on operational theory, practical skills and accepted shop procedures.

CREDIT HOURS

SEMESTER I

AUMT 1305 Introduction to Automotive Technology 3
AUMT 1306 Automotive Engine Removal and Installation 3
AUMT 1319 Automotive Engine Repair 3
AUMT 1307 Automotive Electrical Systems 3
+Elective MATH Elective 3
15

SEMESTER II

AUMT 1310 Automotive Brake Systems 3
AUMT 1316 Automotive Suspension and Steering Systems 3
AUMT 2321 Automotive Electrical Diagnosis and Repair 3
ENGL 1301 Composition I 3
12

SEMESTER III

AUMT 1345 Automotive Climate Control Systems 3
SPCH 1311 Introduction to Speech Communication 3
6

SEMESTER IV

AUMT 2317 Automotive Engine Performance Analysis I 3
AUMT 2334 Automotive Engine Performance Analysis II 3
AUMT 2380 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3
++Elective Humanities/Fine Arts 3
12

SEMESTER V

AUMT 2313 Automotive Drive Train and Axles 3
AUMT 2325 Automotive Automatic Transmission and Transaxle 3
AUMT 2332 Automotive Automatic Transmission and Transaxle II OR 3
AUMT 2311 Automotive Electronic Controls (3)
AUMT 2381 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3
+++Elective Social/Behavioral Sciences 3
15
Minimum Hours Required 60

+MATH Elective - must be selected from the AAS Core Options for Mathematics.

++Humanities/Fine Arts Elective - must be selected from the AAS Core Options for Humanities/Fine Arts.

+++Social/Behavioral Science Elective - must be selected from the AAS Core Options for Social/Behavioral Science.

NOTE: Students enrolling in this program who plan to transfer to a four-year institution should consult an advisor or counselor regarding transfer requirements and the transferability of these courses to the four year institution of their choice.

[Back to Top]


AUTOMOTIVE TECHNOLOGY -- TOYOTA TECHNICIAN-TRAINING AND EDUCATION NETWORK

(Associate in Applied Sciences Degree)

Eastfield only

  • Students pursuing this award program are required to meet Texas Success Initiative (TSI) standards and course prerequisites.
  • Students must earn at least 25% of the credit hours required for graduation through instruction by the college awarding the degree.

Degree Plan Code: AAS.AT.TOYOTA.TECH

This specialized program is designed to prepare students for entry-level employment as Automotive technicians in Toyota/Lexus dealership service organizations. Sponsorship at a Toyota/Lexus dealer is not required to begin the program; however, award of manufacturer certifications tied are contingent on obtaining and sustaining sponsorship at a Toyota/Lexus dealer. Emphasis is placed upon the development of the necessary skills and knowledge required to function in Toyota/Lexus dealerships repairing and maintaining Toyota/Lexus model automobiles with electronic systems. This program includes operational theory, practical skills, and accepted shop procedures reinforced by intensive practice during cooperative work experience periods in the sponsoring dealership.

CREDIT HOURS

SEMESTER I

AUMT 1405 Introduction to Automotive Technology 4
AUMT 1307 Automotive Electrical Systems 3
AUMT 2321 Automotive Electrical Diagnosis and Repair 3
AUMT 2211 Automotive Electronic Controls 2
+Elective MATH Elective 3
15

SEMESTER II

AUMT 1316 Automotive Suspension and Steering Systems 3
AUMT 1310 Automotive Brake Systems 3
AUMT 1345 Automotive Climate Control Systems 3
AUMT 1319 Automotive Engine Repair 3
ENGL 1301 Composition I 3
15

SEMESTER III

AUMT 2380 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician OR 3
AUMT 2381 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician (3)
SPCH 1311 Introduction to Speech Communication 3
6

SEMESTER IV

AUMT 1306 Automotive Engine Removal and Installation 3
AUMT 2317 Automotive Engine Performance Analysis I 3
AUMT 2334 Automotive Engine Performance Analysis II 3
++Elective Humanities/Fine Arts 3
12

SEMESTER V

AUMT 2325 Automotive Automatic Transmission and Transaxle 3
AUMT 2332 Automotive Automatic Transmission and Transaxle II 3
AUMT 2313 Automotive Drive Train and Axles 3
+++Elective Social/Behavioral Sciences 3
12
Minimum Hours Required 60

+MATH Elective - must be selected from the AAS Core Options for Mathematics.

++Humanities/Fine Arts Elective - must be selected from the AAS Core Options for Humanities/Fine Arts.

+++Social/Behavioral Science Elective - must be selected from the AAS Core Options for Social/Behavioral Sciences.

NOTE: Some students enrolling in this program may plan to transfer to four- year institutions. They should consult with an advisor or counselor regarding transfer requirements and to identify how courses will transfer to the four year institution of their choice.

[Back to Top]


AUTOMOTIVE TECHNOLOGY -- TRANSMISSION SERVICE TECHNICIAN

(Level I Certificate)

Brookhaven, Cedar Valley and Eastfield only

  • Students pursuing this certificate are waived from the Texas Success Initiative (TSI) standards, but must meet course prerequisites.
  • Students must earn at least 25% of the credit hours required for graduation through instruction by the college awarding the degree.

Degree Plan Code: C1.AUMT.TRANSMISSION

CREDIT HOURS

SEMESTER I

AUMT 1305 Introduction to Automotive Technology 3
AUMT 1307 Automotive Electrical Systems 3
AUMT 2313 Automotive Drive Train and Axles 3
9

SEMESTER II

AUMT 2325 Automotive Automatic Transmission and Transaxle 3
AUMT 2321 Automotive Electrical Diagnosis and Repair 3
+Elective Cooperative Education - Automobile/Automotive Mechanics Technology/Technician 3
9
Minimum Hours Required 18

+Elective - must be selected from the following:

AUMT 1380 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3
AUMT 2380 Cooperative Education-Automobile/Automotive Mechanics Technology/Technician 3

NOTE: Some students enrolling in this program may plan to transfer to four-year institutions. They should consult with an advisor or counselor regarding transfer requirements and to identify how courses will transfer to the four-year institution of their choice.

[Back to Top]



© 2015 Dallas County Community College District.