(Associate of Applied Science Degree)
Eastfield, Mountain View and North Lake campus only
- Students pursuing this award program are required to meet Texas Success Initiative (TSI) standards and course prerequisites.
- Complete at least 25% of the credit hours required for graduation through instruction by Dallas College.
Degree Plan Code: AAS.WELDING.APPS
The Welding Applications AAS and Level 2 Certificate consist of the same welding courses. The only difference between them is the AAS requires a small amount of additional academic coursework that the certificate does not require. Upon completion, students should possess the skills and knowledge for successful careers in welding. The welding portion of both awards prepares students to successfully apply technical knowledge and skills in Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW), and Gas Tungsten Arc Welding (GTAW) to join or cut metal surfaces. Students are able to choose from three different emphasis: Multiple Welding Process, Pipe Welding and Fitting, or Fabrication.
A student must complete all courses in ONE specialization (MULTIPLE PROCESSES WELDING SPECIALIZATION, PIPE WELDING AND FITTING SPECIALIZATION, or FABRICATION SPECIALIZATION) to be awarded the Welding Applications AAS.
Semester 1 |
Course |
Course Title |
Credit Hours |
WLDG 1307 |
Introduction to Welding Using Multiple Processes |
3 |
WLDG 1428 |
Introduction to Shielded Metal Arc Welding (SMAW) |
4 |
WLDG 1430 |
Introduction to Gas Metal Arc Welding (GMAW) |
4 |
WLDG 1313 |
Introduction to Blueprint Reading for Welders |
3 |
WLDG 1417 |
Introduction to Layout and Fabrication |
4 |
|
OR ➄ |
|
WLDG 1434 |
Introduction to Gas Tungsten Arc Welding (GTAW) |
(4) |
Semester Total |
18 |
Semester 2 |
Course |
Course Title |
Credit Hours |
WLDG 1391 |
Special Topics in Welder/Welding Technologist |
3 |
WLDG 1457 |
Intermediate Shielded Metal Arc Welding (SMAW) |
4 |
WLDG 2447 |
Advanced Gas Metal Arc Welding (GMAW) |
4 |
WLDG 1417 |
Introduction to Layout and Fabrication |
4 |
|
OR ➄ |
|
WLDG 1434 |
Introduction to Gas Tungsten Arc Welding (GTAW) |
(4) |
Elective |
Mathematics Elective ➀ |
3 |
Semester Total |
18 |
Minimum Hours Required |
36 |
After completing Semesters 1 and 2, the student will select a specialization and complete all courses in Semesters 3 and 4.
MULTIPLE PROCESSES WELDING SPECIALIZATION
Semesters 1 and 2 |
Course |
Course Title |
Credit Hours |
Semesters 1 and 2 Curriculum |
36 |
Semester 3 |
Course |
Course Title |
Credit Hours |
WLDG 2443 |
Advanced Shielded Metal Arc Welding (SMAW) |
4 |
WLDG 2451 |
Advanced Gas Tungsten Arc Welding (GTAW) |
4 |
Elective |
Humanities/Fine Arts ➁ |
3 |
Elective |
Social/Behavioral Science ➂ |
3 |
Semester Total |
14 |
Semester 4 |
Course |
Course Title |
Credit Hours |
WLDG 1480 |
Cooperative Education-Welding Technology/Welder |
4 |
|
OR |
|
WLDG 1437 |
Introduction to Welding Metallurgy |
(4) |
|
OR |
|
WLDG 2452 |
Advanced Flux Cored Arc Welding |
(4) |
Elective |
SPCH Elective ➃ |
3 |
ENGL 1301 |
Composition 1I |
3 |
Semester Total |
10 |
Multiple Processes Welding Specialization Minimum Hours Required |
60 |
PIPE WELDING AND FITTING SPECIALIZATION
Semesters 1 and 2 |
Course |
Course Title |
Credit Hours |
Semesters 1 and 2 Curriculum |
36 |
Semester 3 |
Course |
Course Title |
Credit Hours |
WLDG 2413 |
Intermediate Welding Using Multiple Processes |
4 |
WLDG 1453 |
Intermediate Layout and Fabrication |
4 |
Elective |
Humanities/Fine Arts ➁ |
3 |
Elective |
Social/Behavioral Science ➂ |
3 |
Semester Total |
14 |
Semester 4 |
Course |
Course Title |
Credit Hours |
WLDG 2453 |
Advanced Pipe Welding |
4 |
Elective |
SPCH Elective ➃ |
3 |
ENGL 1301 |
Composition 1I |
3 |
Semester Total |
10 |
Pipe Welding and Fitting Specialization Minimum Hours Required |
60 |
FABRICATION SPECIALIZATION
Semesters 1 and 2 |
Course |
Course Title |
Credit Hours |
Semesters 1 and 2 Curriculum |
36 |
Semester 3 |
Course |
Course Title |
Credit Hours |
WLDG 1453 |
Intermediate Layout and Fabrication |
4 |
Elective |
Humanities/Fine Arts ➁ |
3 |
Elective |
Social/Behavioral Science ➂ |
3 |
Semester Total |
10 |
Semester 4 |
Course |
Course Title |
Credit Hours |
WLDG 2435 |
Advanced Layout and Fabrication |
4 |
WLDG 1480 |
Cooperative Education-Welding Technology/Welder |
4 |
|
OR |
|
DFTG 1413 |
Drafting for Specific Occupations |
(4) |
Elective |
SPCH Elective ➃ |
3 |
ENGL 1301 |
Composition 1I |
3 |
Semester Total |
14 |
Fabrication Specialization Minimum Hours Required |
60 |
➀ Mathematics Elective - must be selected from the AAS Core Options for Mathematics.
➁ Humanities/Fine Arts Elective - must be selected from the AAS Core Options for Humanities/Fine Arts.
➂ Social/Behavioral Sciences Elective - must be selected from the AAS Core Options for Social/Behavioral Sciences.
➃ SPCH Elective - must be selected from the following:
|
Course |
Course Title |
Credit Hours |
SPCH 1311 |
Introduction to Speech Communication |
3 |
SPCH 1315 |
Public Speaking |
3 |
SPCH 1321 |
Business and Professional Communication |
3 |
➄ Students must select between WLDG 1434 or WLDG 1417.
NOTE: Students enrolling in this program who plan to transfer to a four-year institution should consult an advisor or counselor regarding transfer requirements and the transferability of these courses to the four-year institution of their choice.