CNBT 1170 (1 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Basic Construction Safety
This is a Local Need Course.
Course Description: This course covers basic job site construction safety in commercial and industrial construction. The OSHA 10 safety course outline is followed along with a study of hazardous materials on the job site. Lab required. (1 Lec.)
|
CNBT 1201 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Introduction to the Construction Industry
This is a WECM Course Number.
Course Description: Overview of the construction industry. This course is cross-listed as CNBT 1301. The student may register for either CNBT 1201 or CNBT 1301 but may receive credit for only one of the two. (1 Lec., 3 Lab.)
|
CNBT 1300 (3 Credit Hours) New course added July 1, 2014
Offered at NLC
Residential and Light Commercial Blueprint Reading
This is a WECM Course Number.
Course Description: Introductory blueprint reading for residential and light commercial construction. (3 Lec.)
|
CNBT 1301 (3 Credit Hours)
Offered at NLC
Introduction to the Construction Industry
This is a WECM Course Number.
Course Description: Overview of the construction industry. This course is cross-listed as CNBT 1201. The student may register for either CNBT 1301 or CNBT 1201 but may receive credit for only one of the two. (3 Lec.)
|
CNBT 1302 (3 Credit Hours)
Offered at NLC
Mechanical, Plumbing and Electrical Systems in Construction I
This is a WECM Course Number.
Course Description: A presentation of the basic mechanical, plumbing, and electrical components in construction and their relationship to residential and light commercial buildings. (2 Lec., 2 Lab.)
|
CNBT 1305 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Residential and Light Commercial Blueprint Reading
This is a WECM Course Number.
Course Description: Blueprint reading covering the theory of projection, architectural and engineering symbols, relationship of views, and measuring with emphasis on residential and light commercial construction. Lab required. (3 Lec.)
|
CNBT 1307 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial and Industrial Blueprint Reading
This is a WECM Course Number.
Course Description: Blueprint reading covering the theory of projection, architectural and engineering symbols, relationship of views, and measuring with emphasis on commercial and industrial construction. (3 Lec. / 2 Lec., 3 Lab.)
|
CNBT 1311 (3 Credit Hours)
Offered at NLC
Construction Methods and Materials I
This is a WECM Course Number.
Course Description: An introduction to construction materials and methods and their applications. This course is cross-listed as CNBT 1411. The student may register for either CNBT 1311 or CNBT 1411 but may receive credit for only one of the two. (2 Lec., 2 Lab.)
|
CNBT 1318 (3 Credit Hours)
Offered at NLC
Construction Tools and Techniques
This is a WECM Course Number.
Course Description: Comprehensive study of the selection and use of hand tools, portable and stationary power tools and related construction equipment. Emphasis on safety in the use of tools and equipment. (2 Lec., 3 Lab.)
|
CNBT 1342 (3 Credit Hours)
Offered at NLC
Building Codes and Inspections
This is a WECM Course Number.
Course Description: An examination of the building codes and standards applicable to building construction and inspection processes. (3 Lec.)
|
CNBT 1344 (3 Credit Hours)
Offered at NLC
Construction Materials Testing
This is a WECM Course Number.
Course Description: Skill development in laboratory testing and field inspection procedures associated with construction materials. (2 Lec., 2 Lab.)
|
CNBT 1346 (3 Credit Hours)
Offered at NLC
Construction Estimating I
This is a WECM Course Number.
Course Description: Fundamentals of estimating materials and labor costs in construction. (2 Lec., 2 Lab.)
|
CNBT 1359 (3 Credit Hours)
Offered at NLC
Project Scheduling
This is a WECM Course Number.
Course Description: A study of conventional scheduling using critical-path-method; precedence networks; bar charts; monthly reports; and fast track scheduling. (2 Lec., 2 Lab.)
|
CNBT 1371 (3 Credit Hours)
Offered at NLC
Commercial Blueprint Reading
This is a Local Need Course.
Course Description: Blueprint reading covering the theory of projection, architectural and engineering symbols, relationship of views, and measuring with emphasis on commercial and industrial construction. (3 Lec.)
|
CNBT 1372 (3 Credit Hours)
Offered at NLC
Residential, Mechanical, Electrical, and Plumbing Systems
This is a Local Need Course.
Course Description: This course is a study of the mechanical, electrical, plumbing, ventilation, and insulation systems used in residential buildings today. The student will identify and describe the major components of a heating and air conditioning system as well as the methods used in the design, planning, and installation of residential systems. (3 Lec.)
|
CNBT 1373 (3 Credit Hours)
Offered at NLC
Residential Blueprint Reading
This is a Local Need Course.
Course Description: Covers the theory of projection, architectural symbols, relationship of views and measurements, plan and elevation views, including sections and details. The student will describe and read specifications as they are used with residential construction blueprints, including scope, quality, and the methods used in building a residential building. Drawings are used to find, size, shape, and location of residential building components. (3 Lec.)
|
CNBT 1374 (3 Credit Hours)
Offered at NLC
Estimating for Residential Building
This is a Local Need Course.
Course Description: Designed to train the construction worker in the preparation of cost estimates for residential structures. Topics include mathematics, construction techniques, estimating cycle, data sources and use, checklists, and detailed unit quantity estimating methods. Emphasis will be on establishing residential material requirements. (2 Lec., 2 Lab.)
|
CNBT 1375 (3 Credit Hours)
Offered at NLC
Field Engineering I
This is a Local Need Course.
Course Description: This course overviews the duties and responsibilities of field engineering for commercial and industrial building construction. The use of surveying equipment, sketches and proper field notes taking, methods of staking and layout of building site, locating center lines of piers and installation of batter boards. Lab required. (2 Lec., 3 Lab.)
|
CNBT 1391 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Special Topics in Construction/Building Technology/Technician
This is a WECM Course Number.
Course Description: This course continues the study of construction materials, methods, and equipment using the Construction Specifications Institute (CSI) Masterformat. Topics covered include finishes, specialties, equipment, furnishing, special construction with an introduction to conveying, mechanical, electrical systems. This course may be repeated if topics and learning outcomes vary. (2 Lec., 2 Lab.)
|
CNBT 1392 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Special Topics in Construction/Building Technology/Technician
This is a WECM Course Number.
Course Description: This course will concentrate on the organization and preparation of written construction documents. Emphasis will be placed on further developing concepts covered in Principles of Purchasing (BMGT 1313), as well as studying the development and application of master specifications, preliminary project descriptions, outline specifications, and both full, and abbreviated construction documents. Computer applications and automated editing procedures will also be demonstrated and applied. This course may be repeated if topics and learning outcomes vary. (3 Lec.)
|
CNBT 1393 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Special Topics in Construction/Building Technology/Technician
This is a WECM Course Number.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (2 Lec., 2 Lab.)
|
CNBT 1411 (4 Credit Hours)
Offered at EFC
Construction Methods and Materials I
This is a WECM Course Number.
Course Description: An introduction to construction materials and methods and their applications. This course is cross-listed as CNBT 1311. The student may register for either CNBT 1311 or CNBT 1411 but may receive credit for only one of the two. (3 Lec., 3 Lab.)
|
CNBT 1449 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Concrete-Commercial and Industrial
This is a WECM Course Number.
Course Description: In-depth coverage of the various techniques used in concrete utilization in commercial and industrial construction. Lab required. (2 Lec., 3 Lab.)
|
CNBT 2270 (2 Credit Hours)
Offered at NLC
Pipe Welding for the Construction Professional
This is a Local Need Course.
Course Description: This course is specifically geared for the construction technology professional who utilizes the shielded metal arc welding (SMAW) process. Position of welds will be 1G, 2G, 5G, and 6G using various electrodes. Topics covered include electrode selection, equipment setup, and safe shop practices. (1 Lec., 4 Lab.)
|
CNBT 2281 (2 Credit Hours) New course added July 1, 2014
Offered at NLC
Cooperative Education-Construction Engineering Technology/Technician
This is a WECM Course Number.
Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. (1 Lec., 10 Ext.)
|
CNBT 2304 (3 Credit Hours)
Offered at NLC
Construction Methods and Materials II
This is a WECM Course Number.
Course Description: Continuation of the study of the properties of building materials, methods and equipment for their integrated use in completing construction projects. (3 Lec.)
|
CNBT 2315 (3 Credit Hours)
Offered at NLC
Construction Specifications and Contracts
This is a WECM Course Number.
Course Description: Overview of the legal aspects of written construction documents. (2 Lec., 2 Lab.)
|
CNBT 2317 (3 Credit Hours)
Offered at NLC
Green Building
This is a WECM Course Number.
Course Description: Methods and materials used for buildings that conserve energy, water, and human resources. (2 Lec., 2 Lab.)
|
CNBT 2332 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Project Scheduling
This is a WECM Course Number.
Course Description: A study of conventional scheduling using critical-path-method; precedence and arrow networks; gnatt charts; monthly reports; and crashing time schedule. (2 Lec., 2 Lab.)
|
CNBT 2335 (3 Credit Hours)
Offered at NLC
Computer-Aided Construction Scheduling
This is a WECM Course Number.
Course Description: Advanced construction scheduling utilizing computer scheduling software to perform various scheduling procedures. (2 Lec., 3 Lab.)
|
CNBT 2340 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Mechanical, Plumbing and Electrical Systems in Construction II
This is a WECM Course Number.
Course Description: Processes and methods used in design, selection of equipment, and installation of mechanical, plumbing, and electrical systems in commercial buildings. Includes heating and cooling systems, duct work, mechanical and electrical control systems, lighting requirements, and design of water supply and sanitary sewer systems. (2 Lec., 2 Lab.)
|
CNBT 2342 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Construction Management I
This is a WECM Course Number.
Course Description: Human relations management skills in motivation on the job site. Topics include written and oral communications, leadership and motivation, problem solving, and decision making. (2 Lec., 2 Lab.)
|
CNBT 2344 (3 Credit Hours)
Offered at NLC
Construction Management II
This is a WECM Course Number.
Course Description: A management course in contract documents, safety, planning, scheduling, production control, and law and labor. Topics include contracts, planning, cost and production peripheral documents, and cost and work analysis. (2 Lec., 2 Lab.)
|
CNBT 2346 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Construction Management III
This is a WECM Course Number.
Course Description: An advanced course in construction safety, project management, scheduling, material handling, layout, payment scheduling, and inspections. Lab required. (2 Lec., 2 Lab.)
|
CNBT 2370 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Construction Contracts and Specifications
This is a Local Need Course.
Course Description: Written construction communications are the focus of this course. The course includes: the study of construction contracts and building specifications; their preparation, implementation, modification, administration and legal pitfalls are covered. (3 Lec.)
|
CNBT 2371 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Estimating For General/Specialty Commercial Contractors
This is a Local Need Course.
Course Description: This course provides a real world approach to commercial estimating of general and specialty commercial contractors. Individuals are led through methods of quantity take-off, project cost estimates and the decision-making process involved in making a bid. (2 Lec., 2 Lab.)
|
CNBT 2372 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Mechanical, Electrical and Plumbing Systems II
This is a Local Need Course.
Course Description: This continues the study of Mechanical , Plumbing, and Electrical Systems and includes the following topics: human comfort and health requirements; thermodynamic principles; thermal dynamics of buildings; load calculations; active HVAC and passive methods; lighting systems and design; plumbing and fire protection system design; architectural acoustics. (3 Lec.)
|
CNBT 2373 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Introduction to Construction Management
This is a WECM Course Number.
Course Description: This course is designed to provide an integrated look at the practice of construction management. The course material will cover various tools used by the construction manager. It include bidding, estimating and scheduling, contract and project documentation, change order management, accident prevention and loss control, and productivity improvement. (3 Lec.)
|
CNBT 2375 (3 Credit Hours)
Offered at NLC
Field Engineering II
This is a Local Need Course.
Course Description: This course continues the study of field engineering for commercial and industrial building construction. Methods used in estimating materials, development of Quantity logs and pier logs, use of blueprints and field notes, parking lots, retaining systems and basic curves. Lab required. (2 Lec., 3 Lab.)
|
CNBT 2377 (3 Credit Hours)
Offered at NLC
Building and Contracting
This is a Local Need Course.
Course Description: This course covers the basic process of organizing and operating a building or contracting business. Topics covered include establishing goals, organization, directing, staffing, coordinating and controlling, and budgeting Lab Required to operate and make a profit in a construction business. Lab required. (3 Lec.)
|
CNBT 2378 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Estimating Commercial Electrical Construction
This is a Local Need Course.
Course Description: This course covers the process of estimating electrical requirements for the construction of buildings. This course will use the CSI division 16 Electrical as the basis for instruction. The course will expose the individual to an environment similar to an estimating department of a commercial electrical contractor. (2 Lec., 2 Lab.)
|
CNBT 2379 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Estimating Commercial Mechanical Construction
This is a Local Need Course.
Course Description: This course covers the process of estimating mechanical requirements for the construction of buildings. This course will use the CSI division 15 Electrical as the basis for instruction. The course will expose the individual to an environment similar to an estimating department of a commercial electrical contractor. (2 Lec., 2 Lab.)
|
CNBT 2380 (3 Credit Hours)
Offered at NLC
Cooperative Education - Construction Engineering Technology/Technician
This is a WECM Course Number.
Course Description: Career related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 20 Ext.)
|
CNBT 2381 (3 Credit Hours) New course added July 1, 2014
Offered at NLC
Cooperative Education-Construction Engineering Technology/Technician
This is a WECM Course Number.
Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. (1 Lec., 20 Ext.)
|
CNBT 2437 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Construction Estimating II
This is a WECM Course Number.
Course Description: Advanced estimating concepts using computer software programs for the construction and crafts. (2 Lec., 3 Lab.)
|
ELMT 1301 (3 Credit Hours)
Offered at EFC, MVC
Programmable Logic Controllers
This is a WECM Course Number.
Course Description: An introduction to programmable logic controllers as used in industrial environments including basic concepts, programming, applications, troubleshooting of ladder logic, and interfacing of equipment. Students will explain terminology; select hardware components; predict PLC operation based on ladder logic diagrams; program a PLC to perform various control functions. (2 Lec., 4 Lab.)
|
ELMT 1391 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Special Topics in Electromechanical Technology/Technician
This is a WECM Course Number.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (2 Lec., 4 Lab.)
|
ELMT 1402 (4 Credit Hours)
Offered at EFC
Solar Photovoltaic Systems
This is a WECM Course Number.
Course Description: Design and installation of solar photovoltaic systems and their applications. (3 Lec., 3 Lab.)
|
ELMT 1405 (4 Credit Hours) New course added July 1, 2014
Offered at EFC
Basic Fluid Power
This is a WECM Course Number.
Course Description: Basic fluid power course covering pneumatic and hydraulic systems, fluid power symbols, operating theory, components, and basic electrical and manual controls. (3 Lec., 3 Lab.)
|
ELMT 1411 (4 Credit Hours)
Offered at EFC
Solar Fundamentals
This is a WECM Course Number.
Course Description: Study of heat transference, motors, pumps and other mechanical devices; solid state switches; photovoltaic plates and energy conversion; thermal dynamics; and solar energy. (3 Lec., 3 Lab.)
|
ELMT 2239 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Advanced Programmable Logic Controllers
This is a WECM Course Number.
Course Description: Advanced applications of programmable logic controllers as used in industrial environments including concepts of programming, industrial applications, troubleshooting ladder logic, and interfacing to equipment. (1 Lec., 3 Lab.)
|
ELMT 2433 (4 Credit Hours)
Offered at MVC
Industrial Electronics
This is a WECM Course Number.
Prerequisite: CETT 1429.
Course Description: This course is a study of devices, circuits, and systems primarily used in automated manufacturing and/or process control including computer controls and interfacing between mechanical, electrical, electronic, and computer equipment. Presentation of programming schemes. The student will describe how electronic input and output circuits are used to control automated manufacturing and/or process systems; identify basic elements used for input, output, timing, and control; define how programmable electronic systems use input data to alter output responses; troubleshoot a representative system; and demonstrate how system operation can be altered with software programming. (3 Lec., 3 Lab.)
|
ELMT 2471 (4 Credit Hours)
Offered at EFC
Alternative Energy Systems
This is a Local Need Course.
Course Description: A study of residential and commercial business solar and wind turbine on site power generation. The course will emphasize the electrical/electronic skills needed for the installation and service/repair of such alternative energy systems. Hands-on lab experiences in installation processes will be part of the course. (3 Lec., 3 Lab.)
|
ELPT 1215 (2 Credit Hours)
Offered at NLC
Electrical Calculations I
This is a WECM Course Number.
Course Description: Introduction to mathematical applications utilized to solve problems in the electrical field. Topics include fractions, decimals, percentages, simple equations, ratio and proportion, unit conversions, and applied geometry. (2 Lec.)
|
ELPT 1221 (2 Credit Hours)
Offered at NLC
Introduction to Electrical Safety and Tools
This is a WECM Course Number.
Course Description: Basic theory and practice of electrical circuits. Includes calculations as applied to alternating and direct current. (2 Lec., 1 Lab.)
|
ELPT 1311 (3 Credit Hours)
Offered at NLC
Basic Electrical Theory
This is a WECM Course Number.
Course Description: Basic theory and practice of electrical circuits. Includes calculations as applied to alternating and direct current. (2 Lec., 2 Lab.)
* Note:
This Course Description includes updates that were added after it was originally published on June 9, 2014. (Original) | (Changes)
|
ELPT 1319 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Fundamentals of Electricity I
This is a WECM Course Number.
Course Description: An introduction to basic direct current (DC) theory including electron theory and direct current applications. Lab required. (2 Lec., 3 Lab.)
|
ELPT 1320 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Fundamentals of Electricity II
This is a WECM Course Number.
Course Description: Introduces alternating current (AC). Includes AC voltage, frequency, mechanical and electrical degrees, waveforms, resistors, capacitors, and inductors. Basic theory and practice of electrical circuits. Includes calculations as applied to alternating and direct current. (2 Lec., 3 Lab.)
|
ELPT 1321 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Introduction to Electrical Safety and Tools
This is a WECM Course Number.
Course Description: Safety rules and regulations. Includes the selection, inspection, use, and maintenance of common tools for electricians. This course is cross-listed as ELPT 1221. The student may register for either ELPT 1321 or ELPT 1221 but may receive credit for only one of the two. (2 Lec., 3 Lab.)
|
ELPT 1325 (3 Credit Hours)
Offered at NLC
National Electrical Code I
This is a WECM Course Number.
Course Description: An introductory study of the National Electric Code (NEC) for those employed in fields requiring knowledge of the Code. Emphasis on wiring design, protection, methods, and materials; equipment for general use; and basic calculations. (2 Lec., 2 Lab.)
|
ELPT 1329 (3 Credit Hours)
Offered at NLC
Residential Wiring
This is a WECM Course Number.
Course Description: Wiring methods for single family and multi-family dwellings. Includes load calculations, service entrance sizing, proper grounding techniques, and associated safety procedures. (2 Lec., 2 Lab.)
* Note:
This Course Description includes updates that were added after it was originally published on June 9, 2014. (Original) | (Changes)
|
ELPT 1341 (3 Credit Hours)
Offered at NLC
Motor Control
This is a WECM Course Number.
Course Description: Operating principles of solid-state and conventional controls along with their practical applications. Includes braking, jogging, plugging, safety interlocks, wiring, and schematic diagram interpretations (2 Lec., 2 Lab.)
* Note:
This Course Description includes updates that were added after it was originally published on June 9, 2014. (Original) | (Changes)
|
ELPT 1345 (3 Credit Hours)
Offered at NLC
Commercial Wiring
This is a WECM Course Number.
Course Description: Commercial wiring methods. Includes overcurrent protection, raceway panel board installation, proper grounding techniques, and associated safety procedures. (2 Lec., 2 Lab.)
|
ELPT 1349 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Electrical Blueprint Reading
This is a WECM Course Number.
Course Description: Electrical blueprint reading. Includes symbols, specifications, panel and lighting schedules, and riser diagrams. (2 Lec., 3 Lab.)
|
ELPT 1351 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Electrical Machines
This is a WECM Course Number.
Course Description: Direct current (DC) motors, single-phase and polyphase alternating current (AC) motors, generators, and alternators. Emphasis on construction, characteristics, efficiencies, starting, and speed control. (2 Lec., 2 Lab.)
|
ELPT 1357 (3 Credit Hours)
Offered at NLC
Industrial Wiring
This is a WECM Course Number.
Course Description: Wiring methods used for industrial installations. Includes motor circuits, raceway and bus way installations, proper grounding techniques, and associated safety procedures. (2 Lec., 2 Lab.)
|
ELPT 1391 (3 Credit Hours) New course added November 19, 2014
Offered at NLC
Special Topics in Electrical and Power Transmission Installer, General
This is a WECM Course Number.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (2 Lec., 2 Lab.)
|
ELPT 1411 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Basic Electrical Theory
This is a WECM Course Number.
Course Description: Basic theory and practice of electrical circuits. Includes calculations as applied to alternating and direct current. This course is cross-listed as ELPT 1311. The student may register for either ELPT 1411 or ELPT 1311 but may receive credit for only one of the two. (3 Lec., 2 Lab.)
|
ELPT 1441 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Motor Control
This is a WECM Course Number.
Course Description: Operating principles of solid-state and conventional controls along with their practical applications. Includes braking, jogging, plugging, safety interlocks, wiring, and schematic diagram interpretations. (3 Lec., 2 Lab.)
|
ELPT 2270 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Electrical Theory X
This is a Local Need Course.
Course Description: This course is devoted to Programmable Controllers. Topics include basic hardware, processors, numbering systems, ladder diagrams, relays, timers, programming, and troubleshooting. (2 Lec., 1 Lab.)
|
ELPT 2271 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Electrical Job Information X
This is a Local Need Course.
Course Description: This course is devoted to fire alarm systems, instrumentation, flow control, basic telephone systems, and advanced security systems. Diagrams, wiring connections, operation, and troubleshooting of each type of system will be included. (2 Lec., 1 Lab.)
|
ELPT 2419 (4 Credit Hours)
Offered at EFC
Programmable Logic Controllers I
This is a WECM Course Number.
Course Description: Fundamental concepts of programmable logic controllers, principles of operation, and numbering systems as applied to electrical controls. Students will identify and describe digital logic circuits and explain numbering systems; explain the operation of programmable logic controllers; convert ladder diagrams into programs; incorporate timers and counters utilizing programmable logic controllers; and execute and evaluate programs. (3 Lec., 3 Lab.)
|
ELPT 2437 (4 Credit Hours)
Offered at NLC
Electrical Planning and Estimating
This is a WECM Course Number.
Course Description: Planning and estimating for residential, commercial, and industrial wiring systems. Includes a variety of electrical techniques. (3 Lec., 2 Lab.)
* Note:
This Course Description includes updates that were added after it was originally published on June 9, 2014. (Original) | (Changes)
|
ELPT 2443 (4 Credit Hours)
Offered at NLC
Electrical Systems Design
This is a WECM Course Number.
Course Description: Electrical design of commercial and/or industrial projects including building layout, types of equipment, placement, sizing of electrical equipment, and all electrical calculations according to the requirements of the National Electrical Code (NEC). (3 Lec., 2 Lab.)
|
HART 1273 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Air Conditioning Control Principles
This is a Local Need Course.
Course Description: A basic study of electrical, pressure, and temperature controls including motor starting devices, operating relays, and troubleshooting safety controls and devices. Emphasis on use of wiring diagrams to analyze high and low voltage circuits. A review of Ohm's law as applied to A/C controls and circuits. Required. (1 Lec., 3 Lab.)
|
HART 1291 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Special Topics in Heating, Air Conditioning, and Refrigeration Technologies/Technicians
This is a WECM Course Number.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (1 Lec., 2 Lab.)
|
HART 1292 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Special Topics in Energy Management and Systems Technology/Technician
This is a WECM Course Number.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (1 Lec., 2 Lab.)
|
HART 1301 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Basic Electricity for HVAC
This is a WECM Course Number.
Course Description: Principles of electricity as required by HVAC, including proper use of test equipment, electrical circuits, and component theory and operation. This course is cross-listed as HART 1401. The student may register for either HART 1301 or HART 1401 but may receive credit for only one of the two. (2 Lec., 3 Lab.)
|
HART 1303 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Air Conditioning Control Principles
This is a WECM Course Number.
Course Description: A basic study of HVAC and refrigeration controls; troubleshooting of control components; emphasis on use of wiring diagrams to analyze high and low voltage circuits; a review of Ohm's law as applied to air conditioning controls and circuits. This course is cross-listed as HART 1403. The student may register for either HART 1303 or HART 1403 but may receive credit for only one of the two. (2 Lec., 3 Lab.)
|
HART 1307 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Refrigeration Principles
This is a WECM Course Number.
Course Description: An introduction to the refrigeration cycle, heat transfer theory, temperature/pressure relationship, refrigerant handling, refrigeration components and safety. This course is cross-listed as HART 1407 and HART 1507. The student may register for either HART 1307, HART 1407, or HART 1507 but may receive credit for only one of the three. (2 Lec., 3 Lab.)
|
HART 1356 (3 Credit Hours)
Offered at CVC
EPA Recovery Certification Preparation
This is a WECM Course Number.
Course Description: Certification training for HVAC refrigerant recovery and recycling. Instruction will provide a review of EPA guidelines for refrigerant recovery and recycling during the installation, service, and repair of all HVAC and refrigeration systems. (2 Lec., 2 Lab.)
|
HART 1368 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Practicum (Or Field Experience) - Heating, Air Conditioning, And Refrigeration Technology/Technician
This is a WECM Course Number.
Prerequisite: HART 1401, HART 1403, and HART 1407.
Course Description: Practical general training and experiences in the workplace. The college with the employer develops and documents an individualized plan for the student. The plan relates the workplace training and experiences to the student's general and technical course of study. The guided external experiences may be paid or unpaid. (21 Ext.)
|
HART 1374 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Refrigeration Principles
This is a Local Need Course.
Course Description: An introduction to the refrigeration cycle, basic thermodynamics, heat transfer, temperature/pressure relationship, safety, refrigeration containment, and refrigeration components. Lab required. (2 Lec., 3 Lab)
|
HART 1376 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
A/C Control Principles
This is a Local Need Course.
Course Description: A basic study of electrical, pressure, and temperature controls including motor starting devices, operating relays, and troubleshooting safety controls and devices. Emphasis on use of wiring diagrams to analyze high and low voltage circuits. A review of Ohm's law as applied to A/C controls and circuits. Lab required. (2 Lec., 3 Lab.)
|
HART 1380 (3 Credit Hours)
Offered at CVC
Cooperative Education - Heating, Air Conditioning, And Refrigeration Technology/Technician
This is a WECM Course Number.
Prerequisite: HART 1401, HART 1403, and HART 1407.
Course Description: Career related activities encountered in the student's area of specialization are offered through a cooperative agreement between the college, employer, and student. Under supervision of the college and the employer, the student combines classroom learning with work experience. Directly related to a technical discipline, specific learning objectives guide the student through the paid work experience. (1 Lec., 20 Ext.)
|
HART 1391 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Special Topics in Heating, Air Conditioning, and Refrigeration
This is a WECM Course Number.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (1 Lec., 4 Lab.)
|
HART 1393 (3 Credit Hours)
Offered at EFC
Special Topics in Solar Technology/Technician
This is a WECM Course Number.
Course Description: This course will provide hands on experience in the installation and wiring of solar systems. Systems are to include grid tied and battery backup. This course may be repeated if topics and learning outcomes vary. (2 Lec., 4 Lab.)
|
HART 1394 (3 Credit Hours) New course added June 18, 2014
Offered at CVC, EFC
Special Topics in Heating, Air Conditioning, and Refrigeration Mechanic and Repairer
This is a WECM Course Number.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (2 Lec., 4 Lab.)
|
HART 1401 (4 Credit Hours)
Offered at CVC, EFC
Basic Electricity for HVAC
This is a WECM Course Number.
Course Description: Principles of electricity as required by HVAC, including proper use of test equipment, electrical circuits, and component theory and operation. This course is cross-listed as HART 1301. The student may register for either HART 1401 or HART 1301 but may receive credit for only one of the two. (3 Lec.,3 Lab.)
|
HART 1403 (4 Credit Hours)
Offered at CVC, EFC
Air Conditioning Control Principles
This is a WECM Course Number.
Prerequisite: HART 1401.
Course Description: A basic study of electrical, pressure, and temperature controls including motor starting devices, operating relays, and troubleshooting safety controls and devices. Emphasis on use of wiring diagrams to analyze high and low voltage circuits. A review of Ohms law as applied to A/C controls and circuits. This course is cross-listed as HART 1303. The student may register for either HART 1403 or HART 1303 but may receive credit for only one of the two. (3 Lec., 3 Lab.)
|
HART 1407 (4 Credit Hours)
Offered at CVC, EFC
Refrigeration Principles
This is a WECM Course Number.
Course Description: An introduction to the refrigeration cycle, basic thermodynamics, heat transfer, temperature/pressure relationship, safety, refrigeration containment, and refrigeration components. This course is cross-listed as HART 1307 and HART 1507. The student may register for either HART 1307, HART 1407 or HART 1507 but may receive credit for only one of the three. (3 Lec., 3 Lab.)
|
HART 1411 (4 Credit Hours)
Offered at EFC
Solar Fundamentals
This is a WECM Course Number.
Course Description: Study of heat transference, motors, pumps and other mechanical devices; solid state switches; photovoltaic plates and energy conversion; thermal dynamics; and solar energy. (3 Lec., 3 Lab.)
|
HART 1441 (4 Credit Hours)
Offered at CVC, EFC
Residential Air Conditioning
This is a WECM Course Number.
Prerequisite: HART 1403, HART 1407 or consent of instructor.
Course Description: A study of components, applications, and installation of mechanical air conditioning systems including operating conditions, troubleshooting, repair, and charging of air conditioning systems. (3 Lec., 3 Lab.)
|
HART 1442 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial Refrigeration
This is a WECM Course Number.
Course Description: Theory of and practical application in the maintenance of commercial refrigeration; high, medium, and low temperature applications and ice machines. (3 Lec., 3 Lab.)
|
HART 1445 (4 Credit Hours)
Offered at CVC, EFC
Gas And Electric Heating
This is a WECM Course Number.
Prerequisite: HART 1401, HART 1403 or consent of instructor.
Course Description: A study of the procedures and principles used in servicing heating systems including gas fired and electric furnaces. (3 Lec., 3 Lab.)
|
HART 1449 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Heat Pumps
This is a WECM Course Number.
Prerequisite: HART 1403, HART 1407 or consent of instructor.
Course Description: A study of heat pumps, heat pump control circuits, defrost controls, auxiliary heat, air flow, and other topics related to heat pump systems. (3 Lec., 3 Lab.)
|
HART 1451 (4 Credit Hours)
Offered at EFC
Energy Management
This is a WECM Course Number.
Course Description: Basic heat transfer theory; sensible and latent heat loads; building envelope construction; insulin, lighting, and fenestration types; and conducting energy audit procedures. The course develops energy audit recommends based on local utility rates building use, and construction. Laboratory activities include developing energy audit reports, installing energy saving devices, and measuring energy consumption. (3 Lec., 3 Lab.)
|
HART 1470 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Building Energy Systems
This is a Local Need Course.
Course Description: This course introduces the fundamentals of heating, air conditioning, ventilating and refrigeration (HVAC&R) systems, provides a method to prepare, understand and analyze a building and systems load profiles, and describes types and functions of major components of all energy consuming equipment within a building including air and water systems in aspects of primary and secondary system structure. (3 Lec., 3 Lab.)
|
HART 1471 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Energy Conservation Measures
This is a Local Need Course.
Course Description: This course introduces techniques to identify and analyze opportunities in operation and maintenance, and improvement of energy efficiency in each energy system and interactive effects as a whole system. The course provides methodology to calculate energy savings or cost savings. It also should explain the role of corrective, preventative and performance maintenance for buildings and their relation to control systems and demonstrates entry-level technician skills to calibrate, troubleshoot, repair and maintain energy control systems. (3 Lec., 3 Lab.)
|
HART 1491 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Special Topics in Heating, Air Conditioning, and Refrigeration Technologies/Technicians
This is a WECM Course Number.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (3 Lec., 3 Lab.)
|
HART 1492 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Special Topics in Energy Management and Systems Technology/Technician
This is a WECM Course Number.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (3 Lec., 3 Lab.)
|
HART 1494 (4 Credit Hours)
Offered at CVC, EFC
Special Topics in Heating, Air Conditioning, and Refrigeration Mechanic and Repairer
This is a WECM Course Number.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (3 Lec., 3 Lab.)
|
HART 1507 (5 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Refrigeration Principles
This is a WECM Course Number.
Course Description: An introduction to the refrigeration cycle, basic thermodynamics, heat transfer, temperature/pressure relationships, safety, refrigeration containment, and refrigeration components. This course is cross-listed as HART 1307 and HART 1407. The student may register for either HART 1307, HART 1407 or HART 1507 but may receive credit for only one of the three. (4 Lec., 2 Lab.)
|
HART 2270 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial and Industrial Heating Systems
This is a Local Need Course.
Course Description: This course covers the basics of commercial and industrial heating systems. The student will study the basic theory and design of heating systems; methods of installation and the operation of heating equipment; discuss safety requirements when working with heating equipment. (1 Lec., 3 Lab.)
|
HART 2271 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial Air Conditioning
This is a Local Need Course.
Course Description: This course is the study of Air Conditioning Systems with capacities of 25 tons or less. Topics include: safety; HAVC equipment; basic design and planning; trade tools and equipment; diagnose and troubleshooting. (1 Lec., 3 Lab.)
|
HART 2273 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Industrial Air Conditioning
This is a Local Need Course.
Course Description: This course studies Air Conditioning Systems 25 Tons and above. Topics include safety for 25 ton and above systems; HAVC equipment; basic design and planning; trade tools and equipment; diagnose and troubleshooting. (1 Lec., 3 Lab.)
|
HART 2274 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial and Industrial Pneumatic Controls
This is a Local Need Course.
Course Description: This course provides a comprehensive introduction to the design, installation and operation of pneumatic control systems used in commercial and industrial buildings. The student will study system safety and design than apply methods used during installation, start-up, testing, and balancing mechanical systems. (1 Lec., 3 Lab.)
|
HART 2302 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial Air Conditioning System Design
This is a WECM Course Number.
Course Description: Advanced study in essential elements of commercial air conditioning contracting including duct systems design and/or material takeoff; weight estimating; equipment selection using manufacturers catalog data; job cost estimating, scheduling, preparation of shop drawings and submittals. This course is cross-listed as HART 2402. The student may register for either HART 2302 or HART 2402 but may receive credit for only one of the two. (2 Lec., 3 Lab.)
|
HART 2334 (3 Credit Hours) New course added June 18, 2014
Offered at EFC
Advanced Air Conditioning Controls
This is a WECM Course Number.
Course Description: Theory and application of electrical control devices, electromechanical controls, and/or pneumatic controls. (2 Lec., 4 Lab.)
|
HART 2336 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Air Conditioning Troubleshooting
This is a WECM Course Number.
Course Description: An advanced course in application of troubleshooting principles and use of test instruments to diagnose air conditioning and refrigeration components and system problems including conducting performance tests. This course is cross-listed as HART 2436. The student may register for either HART 2336 or HART 2436 but may receive credit for only one of the two. (2 Lec., 3 Lab.)
|
HART 2341 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial Air Conditioning
This is a WECM Course Number.
Course Description: A study of components, applications, and installation of air conditioning systems with capacities of 25 tons or less. This course is cross-listed as HART 2441. The student may register for either HART 2341 or HART 2441 but may receive credit for only one of the two. (2 Lec., 3 Lab.)
|
HART 2342 (3 Credit Hours) New course added June 18, 2014
Offered at EFC
Commercial Refrigeration
This is a WECM Course Number.
Course Description: Theory and practical application in the maintenance of commercial refrigeration; medium, and low temperature applications and ice machines. (2 Lec., 4 Lab.)
|
HART 2368 (3 Credit Hours)
Offered at EFC
Practicum (or Field Experience) - Heating, Air Conditioning, And Refrigeration Technology/Technician
This is a WECM Course Number.
Prerequisite: HART 1401, HART 1403, and HART 1407.
Course Description: Practical general training and experiences in the workplace. The college with the employer develops and documents an individualized plan for the student. The plan relates the workplace training and experiences to the student's general and technical course of study. The guided external experiences may be paid or unpaid. (21 Ext.)
|
HART 2376 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Troubleshooting
This is a Local Need Course.
Course Description: An advance course in application of troubleshooting principles and use of test instruments to diagnose air conditioning and refrigeration components and system problems including conducting performance test. Lab required. (2 Lec., 3 Lab.)
|
HART 2377 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial Air Conditioning
This is a Local Need Course.
Course Description: A study of components, applications, and installation of air conditioning systems with capacities of 25 tons or less. Lab required. (2 Lec., 3 Lab.)
|
HART 2378 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Air Conditioning Systems Design
This is a Local Need Course.
Course Description: A study of the properties of air and results of cooling, heating, humidifying or dehumidifying; heat gain and heat loss calculations including equipment selection and balancing the air system. Lab required. (2 Lec., 3 Lab.)
|
HART 2380 (3 Credit Hours)
Offered at CVC, EFC
Cooperative Education - Heating, Air Conditioning, And Refrigeration Technology/Technician
This is a WECM Course Number.
Prerequisite: HART 1401, HART 1403, and HART 1407.
Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 20 Ext.)
|
HART 2401 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Air Conditioning and Refrigeration Codes
This is a WECM Course Number.
Course Description: HVAC standards and concepts with emphasis on the understanding, and documentation of the codes and regulations required for the state mechanical contractors license and local codes. (3 Lec., 3 Lab.)
|
HART 2402 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial Air Conditioning System Design
This is a WECM Course Number.
Course Description: Advanced study in essential elements of commercial air conditioning contracting including duct systems design and/or material takeoff; weight estimating; equipment selection using manufacturers catalog data; job cost estimating, scheduling, preparation of shop drawings and submittals. This course is cross-listed as HART 2302. The student may register for either HART 2302 or HART 2402 but may receive credit for only one of the two. (3 Lec., 3 Lab.)
|
HART 2431 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Advanced Electricity
This is a WECM Course Number.
Course Description: Advanced electrical instruction and skill building in installation and serving of air conditioning and refrigeration equipment including detailed instruction in motors and power distribution and introduction to solid state devices. (3 Lec., 3 Lab.)
|
HART 2434 (4 Credit Hours)
Offered at EFC
Advanced A/C Controls
This is a WECM Course Number.
Prerequisite: HART 1441, HART 1445 and HART 2449.
Course Description: The theory and application of electrical control devices and control circuits including electro-mechanical and pneumatic controls. (3 Lec., 3 Lab.)
|
HART 2436 (4 Credit Hours)
Offered at CVC, EFC
Air Conditioning Troubleshooting
This is a WECM Course Number.
Prerequisite: HART 1441, HART 1445, HART 2449, or consent of instructor.
Course Description: An advanced course in application of troubleshooting principles and use of test instruments to diagnose air conditioning and refrigeration components and system problems including conducting performance tests. This course is cross-listed as HART 2336. The student may register for either HART 2436 or HART 2336 but may receive credit for only one of the two. (3 Lec., 3 Lab.)
|
HART 2438 (4 Credit Hours)
Offered at CVC, EFC
Air Conditioning Installation and Startup
This is a WECM Course Number.
Prerequisite: HART 1441, HART 1445 and HART 2449.
Course Description: A study of air conditioning system installation, refrigerant piping, condensate disposal, and air cleaning equipment with emphasis on startup and performance testing. (3 Lec., 3 Lab.)
|
HART 2441 (4 Credit Hours)
Offered at EFC
Commercial Air Conditioning
This is a WECM Course Number.
Course Description: A study of components, applications, and installation of air conditioning systems with capacities of 25 tons or less. This course is cross-listed as HART 2341. The student may register for either HART 2341 or HART 2441 but may receive credit for only one of the two. (3 Lec., 3 Lab.)
|
HART 2442 (4 Credit Hours)
Offered at EFC
Commercial Refrigeration
This is a WECM Course Number.
Prerequisite: HART 1441, HART 1445, HART 2449 or consent of instructor.
Course Description: Theory of and practical application in the maintenance of commercial refrigeration, medium and low temperature applications and ice machines. (3 Lec., 3 Lab.)
|
HART 2443 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Industrial Air Conditioning
This is a WECM Course Number.
Course Description: A study of components, accessories, applications, and installation of air conditioning systems above 25 tons capacity. (3 Lec., 3 Lab.)
|
HART 2445 (4 Credit Hours)
Offered at CVC, EFC
Residential Air Conditioning Systems Design
This is a WECM Course Number.
Prerequisite: Advanced standing, or consent of instructor.
Course Description: Study of the properties of air and results of cooling, heating, humidifying or dehumidifying; heat gain and heat loss calculations including equipment selection and balancing the air system. (3 Lec., 3 Lab.)
|
HART 2449 (4 Credit Hours)
Offered at CVC, EFC
Heat Pumps
This is a WECM Course Number.
Prerequisite: HART 1441 and HART 1445 or consent of instructor.
Course Description: A study of heat pumps, heat pump control circuits, defrost controls, auxiliary heat, air flow, and other topics related to heat pump systems. (3 Lec., 3 Lab.)
|
HART 2457 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Specialized Commercial Refrigeration
This is a WECM Course Number.
Course Description: An advanced course covering the components, accessories, and service of specialized refrigeration units, such as ice machines, soft-serve machines, cryogenics, and cascade systems. (3 Lec., 3 Lab.)
|
HART 2488 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Internship - Heating, Air Conditioning, Ventilation and Refrigeration Maintenance Technology/Technician
This is a WECM Course Number.
Course Description: A work-based learning experience that enables the student to apply specialized occupational theory, skills and concepts. A learning plan is developed by the college and the employer. (1 Lec., 15 Ext.)
|
PFPB 1219 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial Plumbing I
This is a WECM Course Number.
Course Description: Skills, procedures, and techniques used in the installation of water supply systems and drain, waste, and vent (DWV) systems in commercial buildings. This course is cross-listed as PFPB 1319. The student may register for either PFPB 1219 or PFPB 1319 but may receive credit for only one of the two. (1 Lec., 3 Lab.)
|
PFPB 1225 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Mechanics of Plumbing
This is a WECM Course Number.
Course Description: An introduction to the principles of physical science and the mechanics used in the plumbing industry that includes basic principles of physics, matter, liquids, and hydraulics. (1 Lec., 3 Lab.)
|
PFPB 1247 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Backflow Prevention
This is a WECM Course Number.
Course Description: Principles, practices, and regulations of backflow. Includes backpressure, public health, laws and responsibilities, mechanics and use of backflow devices, and equipment testing used in backflow devices and equipment testing used in backflow devices. (1 Lec., 3 Lab.)
|
PFPB 1248 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Medical Gas
This is a WECM Course Number.
Course Description: Current terminology, installation of materials, safety practices, layout, and inspection techniques for medical gas piping systems. (1 Lec., 3 Lab.)
|
PFPB 1251 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial and Industrial Gas Installation
This is a WECM Course Number.
Course Description: A study of the principles, code requirements, and practical knowledge needed to design and install commercial and industrial gas supply systems Required. (1 Lec., 3 Lab.)
|
PFPB 1253 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial Plumbing II
This is a WECM Course Number.
Course Description: Methods used in the installation of pneumatic controls, water heating systems, circulating water systems, and other piping systems commonly found in commercial buildings. (1 Lec., 3 Lab.)
|
PFPB 1255 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Industrial Plumbing
This is a WECM Course Number.
Course Description: A study of the layout and installation of plumbing systems in industrial construction, including water treatment, power plants, and manufacturing facilities. This course is cross-listed as PFPB 1355. The student may register for either PFPB 1255 or PFPB 1355 but may receive credit for only one of the two. (1 Lec., 3 Lab.)
|
PFPB 1272 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Basic HVAC for Plumbing/Pipefitting
This is a Local Need Course.
Course Description: This course provides an introduction to the basic HVAC and Refrigeration cycle, system components, system operation, application, and design. The student will use gauges to properly test both HVAC and Refrigeration Systems. (1 Lec., 3 Lab.)
|
PFPB 1273 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Mechanical Drafting for Plumbing/Pipefitting
This is a Local Need Course.
Course Description: Detail drawings with proper dimensioning and tolerances, use of sectioning techniques, common fasteners, pictorial drawings, including bill of materials. (1 Lec., 3 Lab.)
|
PFPB 1274 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Basic Computer-Aided Drafting for Plumbing/Pipefitting
This is a Local Need Course.
Course Description: An introduction to computer-aided drafting. Emphasis is placed on setup; creating and modifying geometry; storing and retrieving predefined shapes; placing, rotating, and scaling objects, adding text and dimensions, using layers, coordinate systems, and plot/print to scale. (1 Lec., 3 Lab.)
|
PFPB 1277 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Introduction to Welding Fundamentals I
This is a Local Need Course.
Course Description: An introduction to the safety, techniques and practice in the use of oxy-fuel and shielded metal arc welding equipment. (1 Lec., 3 Lab.)
|
PFPB 1291 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Special Topics in Plumbing Technology/Plumber
This is a WECM Course Number.
Course Description: Topics address recently identified current events, skills, knowledges, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. Required. This course may be repeated if topics and learning outcomes vary. (1 Lec., 3 Lab.)
|
PFPB 1308 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Basic Pipefitting Skills
This is a WECM Course Number.
Course Description: Mathematical operations necessary to calculate laying lengths of pipe fittings for fabrication. Identification and use of hand tools and power tools. Identification of pipe, pipe fittings, flanges, and fasteners used in the trade. (2 Lec., 3 Lab.)
|
PFPB 1313 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Introduction to the Plumbing Trade
This is a WECM Course Number.
Course Description: Material selection, mathematical calculations applicable to the plumbing trade, hand and power tools, and safety practices. (2 Lec., 3 Lab.)
|
PFPB 1319 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial Plumbing I
This is a WECM Course Number.
Course Description: Skills, procedures, and techniques used in the installation of water supply systems and drain, waste, and vent (DWV) systems in commercial buildings. This course is cross-listed as PFPB 1219. The student may register for either PFPB 1319 or PFPB 1219 but may receive credit for only one of the two. (2 Lec., 3 Lab.)
|
PFPB 1323 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Plumbing Codes I
This is a WECM Course Number.
Course Description: An introductory study of state and local plumbing codes and their application in residential and light commercial settings. Required. (2 Lec., 2 Lab.)
|
PFPB 1345 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial Construction and Fixture Setting
This is a WECM Course Number.
Course Description: An overview of the construction industry including: organizational structures and systems; safety regulations and agencies; construction documents; office and field organizations; and the various construction crafts and trades. Required. (2 Lec., 2 Lab.)
|
PFPB 1345-old (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial Construction and Fixture Setting
This is a WECM Course Number.
Course Description: Instruction in the use of practices and procedures employed by a plumber in the common construction of a commercial building including multilevel drain waste vent systems, water systems, and fixture installation. Lab required. (2 Lec., 3 Lab.)
|
PFPB 1350 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Plumbing and Pipefitting Equipment and Safety
This is a WECM Course Number.
Course Description: Safe use of hand tools, power tools, rigging, and power equipment used in the plumbing trade for installation of different plumbing systems. (2 Lec., 2 Lab.)
|
PFPB 1353 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial Plumbing II
This is a WECM Course Number.
Course Description: Methods used in the installation of controls, water heating systems, circulating water systems, and other piping systems commonly found in commercial buildings. (2 Lec., 3 Lab.)
|
PFPB 1355 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Industrial Plumbing
This is a WECM Course Number.
Course Description: A study of the layout and installation of plumbing systems in industrial construction, including water treatment, power plants, and manufacturing facilities. This course is cross-listed as PFPB 1255. The student may register for either PFPB 1355 or PFPB 1255 but may receive credit for only one of the two. (2 Lec., 3 Lab.)
|
PFPB 1357 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Plumbing Codes II
This is a WECM Course Number.
Course Description: An advanced study of state and local plumbing codes and their application in commercial and industrial settings. (2 Lec., 2 Lab.)
|
PFPB 1370 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial Plumbing I
This is a Local Need Course.
Course Description: This course covers the skills in the procedures and techniques employed in the installation of DWV systems, water supply systems in commercial buildings. Lab required. (2 Lec., 3 Lab.)
|
PFPB 1371 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial Plumbing II
This is a Local Need Course.
Course Description: This course continues the study commercial plumbing started in commercial plumbing I with proper methods used in the layout and installation of gas, Pneumatic, Water Heating Systems and miscellaneous piping commonly found in commercial buildings. Lab required. (2 Lec., 3 Lab.)
|
PFPB 2235 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial and Industrial Control Systems
This is a WECM Course Number.
Course Description: Control system design and equipment use in commercial and industrial control systems. Includes air handling units variable air volume boxes, chillers, absorption systems, cooling towers, water treatment, and chilled water systems. (1 Lec., 3 Lab.)
|
PFPB 2239 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial and Industrial System Start-Up
This is a WECM Course Number.
Course Description: Testing procedures used and terminology associated with system start-ups. Includes performance of system start-ups using safety procedures in commercial and industrial piping systems. (1 Lec., 3 Lab.)
|
PFPB 2240 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Medical Gas
This is a WECM Course Number.
Course Description: A study of the basic installation and inspection techniques used for medical gas piping. Required. (1 Lec., 3 Lab.)
|
PFPB 2271 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Advanced HVAC for Plumbers/Pipefitters/AC
This is a Local Need Course.
Course Description: This course is a comprehensive study of industrial equipment, applications, and codes that relate to large component split systems, centrifugal chillers, absorption chillers, and related equipment. (1 Lec., 3 Lab.)
|
PFPB 2277 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Motors and Pump Alignment for Plumbers/Pipefitters/AC
This is a Local Need Course.
Course Description: This course provides a comprehensive introduction to motors and pumps used in commercial and industrial mechanical systems. The student will study system safety and design that apply methods used during installation, alignment, start-up, testing, and balancing motors and pumps used in mechanical systems. (1 Lec., 3 Lab.)
|
PFPB 2278 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Industrial Drafting Applications for Plumbing/Pipefitting
This is a Local Need Course.
Course Description: An advanced synthesis of industrial drafting practices with emphasis on research, design, and project techniques. (1 Lec., 3 Lab.)
|
PFPB 2279 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Pipe Welding for the Plumbing/Pipefitting Professional
This is a Local Need Course.
Course Description: Instructions using layout tools and blueprint reading with demonstration and guided practices specifically utilized by the Plumbing/ Pipefitting industry. (1 Lec., 3 Lab.)
|
PFPB 2301 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Pipe Fabrication and Installation I
This is a WECM Course Number.
Course Description: Skill development in pipe fabrication and pipe supports. Lab required. (2 Lec., 3 Lab.)
|
PFPB 2307 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Pipe Fabrication and Installation I
This is a WECM Course Number.
Course Description: Pipe fabrication of various materials and installation of pipe supports. (2 Lec., 3 Lab.)
|
PFPB 2309 (3 Credit Hours) New course added July 1, 2014
Offered at NLC
Residential Construction Plumbing I
This is a WECM Course Number.
Course Description: Skill development in the procedures and techniques employed by a plumber in the rough-in and top-out stages of a new home or the remodeling of an older home. (2 Lec., 2 Lab.)
|
PFPB 2336 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Commercial Construction and Fixture Setting
This is a WECM Course Number.
Course Description: Practices and procedures employed by a plumber in the common construction of a commercial building including drain, waste, and vent systems, water systems, and fixture installations. (2 Lec., 2 Lab.)
|
PFPB 2341 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Pipe Fabrication and Installation II
This is a WECM Course Number.
Course Description: Advanced pipe fabrication of various materials with emphasis on vertical, horizontal, and rolling off-sets using 45-degree fittings and odd-angle fittings. (2 Lec., 3 Lab.)
|
PFPB 2343 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Advanced Pipe Practices
This is a WECM Course Number.
Course Description: Identification, installation, and testing of steam traps and steam trap station components; valve identification, application, and maintenance; identification, storage, and handling of in-line specialties; hydrostatic testing of process piping. (2 Lec., 3 Lab.)
|
PFPB 2347 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Plumbing and Pipefitting Equipment and Safety
This is a WECM Course Number.
Course Description: Instruction in the safe use of construction equipment used in the process of the plumbing and pipefitting trades. Required (1 Lec., 3 Lab.)
|
PFPB 2357 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Plumbing Codes II
This is a WECM Course Number.
Course Description: State and local plumbing codes and the application of potable water, waste water, and gas systems relating to residential and light commercial settings. (2 Lec., 2 Lab.)
|
PFPB 2370 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Industrial Plumbing
This is a WECM Local Need Course.
Course Description: This covers layout and installation of plumbing systems in industrial construction, which includes water treatment, power plants and manufacturing plants. Lab required. (2 Lec., 3 Lab.)
|
WLDG 1191 (1 Credit Hours)
Offered at MVC
Special Topics in Welder/Welding Technologist
This is a WECM Course Number.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (1 Lec., 1 Lab.)
|
WLDG 1273 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Introduction to Layout and Fabrication
This is a Local Need Course.
Course Description: A fundamental course in layout and fabrication related to the welding industry. Major emphasis on structural shapes and use in construction. (1 Lec., 3 Lab.)
|
WLDG 1274 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Intermediate Layout and Fabrication
This is a Local Need Course.
Course Description: A continuation of the introductory Layout and Fabrication course which covers design and production of shop layout and fabrication. Emphasis placed on symbols, blueprints, and written specifications. (1 Lec., 3 Lab.)
|
WLDG 1277 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Introduction to Welding Fundamentals I
This is a Local Need Course.
Course Description: An introduction to the safety, techniques and practice in the use of oxy-fuel and shielded metal arc welding equipment. (1 Lec., 3 Lab.)
|
WLDG 1278 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Introduction to Welding Fundamentals II
This is a Local Need Course.
Course Description: A continuation in the fundamentals of equipment used in welding. This course also covers basic metallurgy. (1 Lec., 3 Lab.)
|
WLDG 1291 (2 Credit Hours)
Offered at MVC
Special Topics in Welder/Welding Technologist
This is a WECM Course Number.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (1 Lec., 3 Lab./1 Lec., 2 Lab.)
|
WLDG 1307 (3 Credit Hours)
Offered at CVC
Introduction to Welding Using Multiple Processes
This is a WECM Course Number.
Course Description: Basic welding processes. Includes oxy-fuel welding (OFW) and cutting, shielded metal arc welding (SMAW), gas metal arc (GMAW), and gas tungsten arc welding (GTAW). (2 Lec., 3 Lab.)
|
WLDG 1317 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Introduction to Layout and Fabrication
This is a WECM Course Number.
Course Description: A fundamental course in layout and fabrication related to the welding industry. Major emphasis on structural shapes and use in construction. (2 Lec., 3 Lab.)
|
WLDG 1323 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Welding Safety, Tools, and Equipment
This is a WECM Course Number.
Course Description: An introduction to welding careers and safety practice, including welding safety; OSHA and the Hazardous Communication Act; Material Safety Data Sheets (MSDS); basic mathematics; measuring systems; shop operations; use and care of precision measuring tools; and the use and care of hand and power tools. Instruction on various types of welding equipment and processes, basic welding gases, fluxes, rods, electrodes, symbols, and blueprints. Lab required. (2 Lec., 3 Lab.)
|
WLDG 1337 (3 Credit Hours)
Offered at MVC
Introduction to Welding Metallurgy
This is a WECM Course Number.
Course Description: A study of ferrous and nonferrous metals from the ore to the finished product. Emphasis on metal alloys, heat treating, hard surfacing, welding techniques, forging, foundry processes, and mechanical properties of metal including hardness, machinability, and ductility. (1 Lec., 6 Lab.)
|
WLDG 1381 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Cooperative Education-Welding Technology/Welder
This is a WECM Course Number.
Course Description: Career related activities encountered in the student's area of specialization are offered through a cooperative agreement between the college, employer, and student. under supervision of the college and the employer, the student combines classroom learning with work experience. Directly related to a technical discipline, specific learning objectives guide the student through the paid work experience. (1 Lec., 20 Ext.)
|
WLDG 1391 (3 Credit Hours)
Offered at MVC
Special Topics in Welder/Welding Technologist
This is a WECM Course Number.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (1 Lec., 6 Lab./2 Lec., 3 Lab.)
|
WLDG 1425 (4 Credit Hours)
Offered at EFC, MVC
Introduction to Oxy-Fuel Welding and Cutting
This is a WECM Course Number.
Course Description: An introduction to oxy-fuel welding and cutting, including history and future in welding, safety, setup and maintenance of oxy-fuel welding, and cutting equipment and supplies. (2 Lec., 6 Lab.)
|
WLDG 1428 (4 Credit Hours)
Offered at EFC, MVC
Introduction to Shielded Metal Arc Welding (SMAW)
This is a WECM Course Number.
Course Description: An introduction to shielded metal arc welding process. Emphasis placed on power sources, electrode selection, oxy-fuel cutting, and various joint designs. Instruction provided in SMAW fillet welds in various positions. (2 Lec., 6 Lab.)
|
WLDG 1430 (4 Credit Hours)
Offered at EFC, MVC
Introduction to Gas Metal Arc Welding (GMAW)
This is a WECM Course Number.
Course Description: A study of the principles of gas metal arc welding, setup and use of GMAW equipment, and safe use of tools/equipment. Instruction in various joint designs. This course is cross-listed as WLDG 1230. The student may register for either WLDG 1430 or WLDG 1230 but may receive credit for only one of the two. (2 Lec., 6 Lab.)
|
WLDG 1434 (4 Credit Hours)
Offered at EFC, MVC
Introduction to Gas Tungsten Arc (GTAW) Welding
This is a WECM Course Number.
Course Description: An introduction to the principles of gas tungsten arc welding (GTAW), setup/use of GTAW equipment, and safe use of tools and equipment. Welding instruction in various positions on joint designs. This course is cross-listed as WLDG 1234. The student may register for either WLDG 1434 or WLDG 1234 but may receive credit for only one of the two. (2 Lec., 6 Lab.)
|
WLDG 1435 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Introduction to Pipe Welding
This is a WECM Course Number.
Course Description: An introduction to welding of pipe using the shielded metal arc welding process (SMAW), including electrode selection, equipment setup, and safe shop practices. Emphasis on weld positions 1G and 2G using various electrodes. Lab required. (3 Lec., 2 Lab.)
|
WLDG 1457 (4 Credit Hours)
Offered at EFC, MVC
Intermediate Shielded Metal Arc Welding (SMAW)
This is a WECM Course Number.
Course Description: A study of the production of various fillets and groove welds. Preparation of specimens for testing in all test positions. This course is cross-listed as WLDG 1257. The student may register for either WLDG 1457 or WLDG 1257 but may receive credit for only one of the two. (2 Lec., 6 Lab.)
|
WLDG 1471 (4 Credit Hours)
Offered at EFC, MVC
Welding Qualifications
This is a Local Need Course.
Course Description: Topics covered will include interpretation of applicable welding specifications, electrode use, current/polarity characteristics, performing a wide range of welding operations, weld quality analysis, welding supplies/materials conservation practices, and operational safety practices. (2 Lec., 6 Lab.)
|
WLDG 1491 (4 Credit Hours)
Offered at MVC
Special Topics in Welder/Welding Technologist
This is a WECM Course Number.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (2 Lec., 6 Lab.)
|
WLDG 2270 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Intermediate Pipe Welding I
This is a Local Need Course.
Course Description: Pipe welding using the shielded metal arc welding (SMAW) process. (1 Lec., 3 Lab.)
|
WLDG 2271 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Intermediate Welding Using Multiple Processes I
This is a Local Need Course.
Course Description: Instruction using layout tools and blueprint reading with demonstration and guided practices with oxy-fuel gas cutting and welding and shield metal arc welding (SMAW). (1 Lec., 4 Lab.)
|
WLDG 2272 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Intermediate Welding Using Multiple Processes II
This is a Local Need Course.
Course Description: Instruction using layout tools and blueprint reading with demonstration and guided practices with some of the following welding processes: gas metal arc welding (GMAW), flux-cored arc welding (FCAW), gas tungsten arc welding (GTAW), or any other approved welding process. (1 Lec., 4 Lab.)
|
WLDG 2273 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Intermediate Pipe Welding II
This is a Local Need Course.
Course Description: This course provides a more in depth understanding of the SMAW process. Position of welds will be 1G, 2G, 5G, and 6G using various electrodes. Topics covered include electrode selection, equipment setup, and safe shop practices. (1 Lec., 3 Lab.)
|
WLDG 2331 (3 Credit Hours)
Offered at MVC
Advanced Blueprint Interpretation and Cost Analysis
This is a WECM Course Number.
Course Description: A continuation of the Blueprint for Welders course. Emphasis placed on inspection, cost analysis, and estimating, including instruction in basic drafting skills. (2 Lec., 4 Lab.)
|
WLDG 2413 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD.
Intermediate Welding Using Multiple Processes
This is a WECM Course Number.
Course Description: Instruction using layout tools and blueprint reading with demonstration and guided practices with some of the following welding processes: oxy-fuel gas cutting and welding, shield metal arc welding, gas metal arc welding, flux-cored arc welding, gas tungsten arc welding, or any other approved welding process. This course is cross-listed as WLDG 2213. The student may register for either WLDG 2413 or WLDG 2213 but may receive credit for only one of the two. (2 Lec., 6 Lab.)
|
WLDG 2443 (4 Credit Hours)
Offered at EFC, MVC
Advanced Shielded Metal Arc Welding (SMAW)
This is a WECM Course Number.
Course Description: Advanced topics based on accepted welding codes. Training provided with various electrodes in shielded metal arc welding processes with open V-groove joints in all positions. (2 Lec., 6 Lab.)
|
WLDG 2447 (4 Credit Hours)
Offered at EFC, MVC
Advanced Gas Metal Arc Welding (GMAW)
This is a WECM Course Number.
Course Description: Advanced topics in GMAW welding, including welding in various positions and directions. (2 Lec., 6 Lab.)
|
WLDG 2451 (4 Credit Hours)
Offered at EFC, MVC
Advanced Gas Tungsten Arc Welding (GTAW)
This is a WECM Course Number.
Course Description: Advanced topics in GTAW welding, including welding in various positions and directions. (2 Lec., 6 Lab.)
|
WLDG 2455 (4 Credit Hours)
Offered at MVC
Advanced Welding Metallurgy
This is a WECM Course Number.
Course Description: A study of metallurgy as it applies to welding, including structure, identification, and testing of metals; temperature changes and their effect on welded metals; properties of metals, and factors affecting weldability of ferrous and nonferrous metals. (2 Lec., 4 Lab.)
|
