This is an archived MVC Online Catalog. Please visit our current Online CatalogOnline Catalog at https://www1.dcccd.edu/catalog/cattoc.cfm?loc=MVC.
Dallas College Catalog filtered for Mountain View Campus
2023 - 2024 Dallas College Catalog
Catalog Filter(s): Mountain View Campus (remove)

2023 - 2024 Catalog
Course Descriptions for ENGR

Course Description Index | Degree Plans

Course Description Help Page

Course Number: ENGR 1172 (1 Credit Hours)
This course is not currently offered by Mountain View Campus.
Listed by Campus(es): RLC

Course Title: Introduction to Experimental Techniques

Prerequisite Required: MATH 2412 or the equivalent.
Course Description: Electrical Engineering fundamentals laboratory that stresses laboratory procedures; learning use of common laboratory equipment such as power supplies, multimeters, signal generators, and oscilloscopes; making measurements; familiarization with simple DC resistor circuits; Ohm's law; analyzing AC signals, including frequency, period, amplitude, and rms value; inductors, capacitors and DC transients; measuring phase shift in an AC circuit due to an inductor or capacitor; and basics of laboratory report writing. (1 Lab.)
Coordinating Board Academic Approval Number 1410017110


Course Number: ENGR 1201 (2 Credit Hours)
Listed by Campus(es): BHC, CVC, EFC, ECC, MVC, RLC

Course Title: Introduction to Engineering

This is a Texas Common Course Number.
Prerequisite Required: MATH 1314 or the equivalent academic preparation.
Course Description: An introduction to the engineering profession with emphasis on technical communication and team-based engineering design. Includes instruction in the application of mathematical and scientific principles to the solution of practical problems for the benefit of society. (1 Lec. 3 Lab.)
Coordinating Board Academic Approval Number 1401015110


Course Number: ENGR 1304 (3 Credit Hours)
Listed by Campus(es): BHC, CVC, MVC, RLC

Course Title: Engineering Graphics I

This is a Texas Common Course Number.
Prerequisite Required: MATH 1314 or the equivalent.
Course Description: Introduction to computer-aided drafting using CAD software and sketching to generate two- and three-dimensional drawings based on the conventions of engineering graphical communication; topics include spatial relationships, multi-view projections and sectioning, dimensioning, graphical presentation of data and fundamentals of computer graphics. (2 Lec., 4 Lab.)
Coordinating Board Academic Approval Number 1513015111


Course Number: ENGR 1307 (3 Credit Hours)
Listed by Campus(es): BHC, MVC, RLC

Course Title: Plane Surveying

This is a Texas Common Course Number.
Prerequisite Required: MATH 1316 and ENGR 1304.
Course Description: Development of skills necessary to recognize and solve problems in surveying; introduction and use of various precision instruments used for surveying, including level, theodolites, electronic distance measuring equipment, and total stations for collecting field data; introduction of Global Positioning Systems (GPS) and Geographic Information Systems (GIS) and their use in surveying; and use of graphic design software, such as AutoCAD or Microstation, in surveying problems. (2 Lec., 4 Lab.)
Coordinating Board Academic Approval Number 1511025111


Course Number: ENGR 2105 (1 Credit Hours)
Listed by Campus(es): BHC, MVC, RLC

Course Title: Electrical Circuits I Laboratory

This is a Texas Common Course Number.
Corequisite/Concurrent: ENGR 2305.
Course Description: Laboratory experiments supporting theoretical principles presented in ENGR 2305 involving DC and AC circuit theory, network theorems, time, and frequency domain circuit analysis. Introduction to principles and operation of basic laboratory equipment; laboratory report preparation. (3 Lab.)
Coordinating Board Academic Approval Number 1410015510


Course Number: ENGR 2106 (1 Credit Hours)
This course is not currently offered by Mountain View Campus.
Listed by Campus(es): RLC

Course Title: Introduction to Digital Systems Laboratory

This is a Texas Common Course Number.
Corequisite/Concurrent: ENGR 2306.
Course Description: Basic laboratory experiments supporting theoretical principles presented in ENGR 2306 involving design, construction, and analysis of combinational and sequential digital circuits and systems, including logic gates, adders, multiplexers, encoders, decoders, arithmetic logic units, latches, flip-flops, registers, and counters; preparation of laboratory reports. (3 Lab.)
Coordinating Board Academic Approval Number 1410015710


Course Number: ENGR 2110 (1 Credit Hours)
This course is not currently offered by Mountain View Campus.
Listed by Campus(es): RLC

Course Title: Introduction to Digital Systems Laboratory

Prerequisite Required: ENGR 2304 or COSC 1436.
Corequisite/Concurrent: ENGR 2310.
Course Description: Laboratory to accompany ENGR 2310. The purpose of this laboratory is to give students an intuitive understanding of digital circuits and systems. Laboratory exercises include construction of simple digital logic circuits using prototyping kits and board-level assembly of a personal computer. (3 Lab.)
Coordinating Board Academic Approval Number 1401017110


Course Number: ENGR 2300 (3 Credit Hours)
This course is not currently offered by Mountain View Campus.
Listed by Campus(es): RLC

Course Title: Applied Linear Algebra

Prerequisite Required: MATH 2414.
Course Description: Matrices, vectors, determinants, linear systems of equations, Gauss-Jordan elimination, vector spaces, basis, eigenvalues, eigenvectors, numerical methods in linear algebra using MATLAB, computer arithmetic, Gaussian elimination, LU factorization, iterative solutions to linear systems, iterative methods for estimating eigenvalues, singular value decomposition, QR factorization. (3 Lec.)
Coordinating Board Academic Approval Number 1410017210


Course Number: ENGR 2301 (3 Credit Hours)
Listed by Campus(es): BHC, MVC, RLC

Course Title: Engineering Mechanics - Statics

This is a Texas Common Course Number.
Prerequisite Required: PHYS 2425.
Corequisite/Concurrent: MATH 2414.
Course Description: Basic theory of engineering mechanics, using calculus, involving the description of forces, moments, and couples acting on stationary engineering structures; equilibrium in two and three dimensions; free-body diagrams; friction; centroids; centers of gravity; and moments of inertia. (3 Lec.)
Coordinating Board Academic Approval Number 1411015210


Course Number: ENGR 2302 (3 Credit Hours)
Listed by Campus(es): BHC, MVC, RLC

Course Title: Engineering Mechanics - Dynamics

This is a Texas Common Course Number.
Prerequisite Required: ENGR 2301.
Corequisite/Concurrent: MATH 2414.
Course Description: Basic theory of engineering mechanics, using calculus, involving the motion of particles, rigid bodies, and systems of particles; Newton's Laws; work and energy relationships; principles of impulse and momentum; application of kinetics and kinematics to the solution of engineering problems. (3 Lec.)
Coordinating Board Academic Approval Number 1411015310


Course Number: ENGR 2304 (3 Credit Hours)
Listed by Campus(es): BHC, MVC, RLC

Course Title: Programming for Engineers

This is a Texas Common Course Number.
Course Description: Programming principles and techniques for matrix and array operations, equation solving, and numeric simulations applied to engineering problems and visualization of engineering information; platforms include spreadsheets, symbolic algebra packages, engineering analysis software, and laboratory control software. (3 Lec.)
Coordinating Board Academic Approval Number 1102015207


Course Number: ENGR 2305 (3 Credit Hours)
Listed by Campus(es): BHC, MVC, RLC

Course Title: Electrical Circuits I

This is a Texas Common Course Number.
Prerequisite Required: MATH 2414 and PHYS 2426.
Corequisite/Concurrent: MATH 2320.
Course Description: Principles of electrical circuits and systems. Basic circuit elements (resistance, inductance, mutual inductance, capacitance, independent and dependent controlled voltage, and current sources). Topology of electrical networks; Kirchhoff's laws; node and mesh analysis; DC circuit analysis; operational amplifiers; transient and sinusoidal steady-state analysis; AC circuit analysis; first-and second-order circuits; Bode plots; and use of computer simulation software to solve circuit problems. (3 Lec.)
Coordinating Board Academic Approval Number 1410015110


Course Number: ENGR 2306 (3 Credit Hours)
This course is not currently offered by Mountain View Campus.
Listed by Campus(es): RLC

Course Title: Introduction to Digital Systems

This is a Texas Common Course Number.
Prerequisite Required: MATH 1314.
Corequisite/Concurrent: ENGR 2106.
Course Description: Introduction to theory and design of digital logic, circuits, and systems. Number systems, operations and codes; logic gates; Boolean Algebra and logic simplification; Karnaugh maps; combinational logic; functions of combinational Logic; flip-flops and related devices; counters; shift registers; sequential logic; memory and storage. (3 Lec.)
Coordinating Board Academic Approval Number 1410015610


Course Number: ENGR 2308 (3 Credit Hours)
Listed by Campus(es): BHC, MVC, RLC

Course Title: Engineering Economics

This is a Texas Common Course Number.
Prerequisite Required: MATH 2413.
Course Description: Methods used for determining the comparative financial desirability of engineering alternatives. Provides the student with the basic tools required to analyze engineering alternatives in terms of their worth and cost, an essential element of engineering practice. The student is introduced to the concept of the time value of money and the methodology of basic engineering economy techniques. The course will address some aspects of sustainability and will provide the student with the background to enable them to pass the Engineering Economy portion of the Fundamentals of Engineering exam. (3 Lec.)
Coordinating Board Academic Approval Number 1401015210


Course Number: ENGR 2310 (3 Credit Hours)
This course is not currently offered by Mountain View Campus.
Listed by Campus(es): RLC

Course Title: Introduction to Digital Systems

Prerequisite Required: ENGR 2304 or COSC 1436.
Corequisite/Concurrent: ENGR 2110.
Course Description: Introduction to hardware structures and assembly-language concepts that form the basis of the design of modern computer systems. Internal data representation and arithmetic operations in a computer. Basic logic circuits. MIPS assembly language. Overview of PC architecture. (3 Lec.)
Coordinating Board Academic Approval Number 1401017210


Course Number: ENGR 2332 (3 Credit Hours)
Listed by Campus(es): BHC, MVC, RLC

Course Title: Mechanics of Materials

This is a Texas Common Course Number.
Prerequisite Required: ENGR 2301.
Course Description: Stresses, deformations, stress-strain relationships, torsions, beams, shafts, columns, elastic deflections in beams, combined loading, and combined stresses. (3 Lec.)
Coordinating Board Academic Approval Number 1411015110


Course Number: ENGR 2333 (3 Credit Hours)
Listed by Campus(es): MVC, RLC

Course Title: Elementary Chemical Engineering

This is a Texas Common Course Number.
Prerequisite Required: ENGR 1201, CHEM 1412, MATH 2414 and PHYS 2425.
Course Description: This course is the foundation for nearly all future chemical engineering courses and analysis. A strong foundation in mathematics, physics, and chemistry is required for application to the solution of problems in industrial chemistry. Students will receive an introduction to chemical engineering calculations, unit equations, process stoichiometry, material and energy balances, and states of matter, and will apply the laws of conservation of mass and energy to reacting and non-reacting, simple and complex chemical systems. (3 Lec.)
Coordinating Board Academic Approval Number 1407015110


Course Number: ENGR 2334 (3 Credit Hours)
This course is not currently offered by Mountain View Campus.
Listed by Campus(es): RLC

Course Title: Chemical Engineering Thermodynamics I

This is a Texas Common Course Number.
Prerequisite Required: MATH 2415.
Course Description: Fundamental concepts of energy and thermodynamics (e.g., temperature, thermodynamic equilibrium, and heat) will be introduced; the course emphasizes techniques in the application of the fundamentals of thermodynamics to various processes as they frequently occur in chemical and bimolecular engineering. Provides the basic skills and tools necessary in designing and analyzing real-life engineering systems. Serves as preparation for other advanced courses in thermodynamics, energy conversion, heat transfer, etc. (3 Lec.)
Coordinating Board Academic Approval Number 1407015210


Course Number: ENGR 2405 (4 Credit Hours)
This course is not currently offered by Mountain View Campus.
Listed by Campus(es): RLC

Course Title: Electrical Circuits I

This is a Texas Common Course Number.
Prerequisite Required: MATH 2414 and PHYS 2426.
Corequisite/Concurrent: MATH 2320.
Course Description: Principles of electrical circuits and systems. Basic circuit elements (resistance, inductance, mutual inductance, capacitance, independent and dependent controlled voltage, and current sources) Topology of electrical networks; Kirchhoff’s laws; node and mesh analysis; DC circuit analysis; operational amplifiers; transient and sinusoidal steady-state analysis; AC circuit analysis; first-and second-order circuits; Bode plots; and use of computer simulation software to solve circuit problems. Laboratory experiments supporting theoretical principles presented in ENGR 2305 involving DC and AC circuit theory, network theorems, time, and frequency domain circuit analysis. Introduction to principles and operation of basic laboratory equipment; laboratory report. (3 Lec., 3 Lab.)
Coordinating Board Academic Approval Number 1410015110



ACGM (Lower-Division Academic Course Guide Manual) Courses

Designated by the Texas Higher Education Coordinating Board for general academic transfer among community, state, and technical colleges in Texas; and state public four-year colleges and universities as freshman and sophomore general education courses.


WECM (Workforce Education Course Manual) Courses

Designated by the Texas Higher Education Coordinating Board as workforce education (technical) courses offered for credit and CEUs (Continuing Education Units). While these courses are designed to transfer among state community colleges, they are not designed to automatically transfer to public four-year colleges and universities.