2023 - 2024 Catalog
Course Descriptions for Manufacturing Technology

Course Number: CETT 1191 (1 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: Special Topics in Computer Engineering Technology/Technician

This is a WECM Course Number.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (1 Lec.)

Course Number: CETT 1303 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC

Course Title: DC Circuits

This is a WECM Course Number.
Course Description: A study of the fundamentals of direct current including Ohm's law, Kirchhoff's laws and circuit analysis techniques. This course is cross-listed as CETT 1403. The student may register for either CETT 1303 or CETT 1403 but may receive credit for only one of the two. (2 Lec., 2 Lab.)

Course Number: CETT 1305 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC

Course Title: AC Circuits

This is a WECM Course Number.
Course Description: A study of the fundamentals of alternating current including series and parallel AC circuits, phasors, capacitive and inductive networks, transformers, and resonance. This course is cross-listed as CETT 1405. The student may register for either CETT 1305 or CETT 1405 but may receive credit for only one of the two. (2 Lec., 2 Lab.)

Course Number: CETT 1357 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC, RLC

Course Title: Linear Integrated Circuits

This is a WECM Course Number.
Course Description: A study of the characteristics, operations, and testing of linear integrated circuits. Applications include instrumentation and active filtering. (2 Lec., 4 Lab.)

Course Number: CETT 1403 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: DC Circuits

This is a WECM Course Number.
Course Description: A study of the fundamentals of direct current including Ohm's law, Kirchhoff's laws and circuit analysis techniques. Emphasis on circuit analysis of resistive networks and DC measurements. This course is cross-listed as CETT 1303. The student may register for either CETT 1303 or CETT 1403 but may receive credit for only one of the two. (3 Lec., 3 Lab.)

Course Number: CETT 1405 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: AC Circuits

This is a WECM Course Number.
Prerequisite Required: CETT 1403.
Course Description: A study of the fundamentals of alternating current including series and parallel AC circuits, phasors, capacitive and inductive networks, transformers, and resonance. This course is cross-listed as CETT 1305. The student may register for either CETT 1405 or CETT 1305 but may receive credit for only one of the two (3 Lec., 3 Lab.)

Course Number: CETT 1407 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC

Course Title: Fundamentals of Electronics

This is a WECM Course Number.
Prerequisite Required: ELPT 1455 and ELPT 2419.
Course Description: Applies concepts of electricity, electronics, and digital fundamentals; supports programs requiring a general knowledge of electronics. Students will build and test circuits using analog and digital components; visually identify components and component values; build and test series and parallel resistive circuits; check resistors, diodes, and transistors using a multimeter. (3 Lec., 3 Lab.)

Course Number: CETT 1425 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: Digital Fundamentals

This is a WECM Course Number.
Course Description: An entry-level course in digital electronics to include numbering systems, logic gates, Boolean algebra, and combinational logic This course is cross-listed as CETT 1325. The student may register for either CETT 1425 or CETT 1325 but may receive credit for only one of the two. (3 Lec., 3 Lab.)

Course Number: CETT 1429 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: Solid State Devices

This is a WECM Course Number.
Prerequisite Required: CETT 1405.
Course Description: A study of diodes, transistor characteristics and other semiconductor devices, including analysis of static and dynamic characteristics, biasing techniques, and thermal considerations. This course is cross-listed as CETT 1329. The student may register for either CETT 1429 or CETT 1329 but may receive credit for only one of the two. (3 Lec., 3 Lab.)

Course Number: CETT 1441 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: Solid State Circuits

This is a WECM Course Number.
Prerequisite Required: CETT 1405.
Course Description: A study of various semiconductor devices incorporated in circuits and their applications. Emphasis on circuit construction, measurements, and analysis. Topics will include JFETs, MOSFETs, oscillators, thyristors, power supply systems, voltage regulators, multistage amplifiers and power amplifiers. (3 Lec., 3 Lab.)

Course Number: CETT 1449 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC

Course Title: Digital Systems

This is a WECM Course Number.
Prerequisite Recommended: CETT 1429.
Course Description: Digital Systems is a course in electronics covering digital systems. Emphasis on application and troubleshooting digital systems using counters, registers, code converters, multiplexers, analog-to-digital circuits, digital-to-analog circuits, and large-scale integrated circuits. The student will evaluate the operation of digital systems while operating in correct and fault mode using various test instruments; describe the difference between a digital system and an analog system; and draw a simple block diagram of a digital computer system. (3 Lec., 3 Lab.)

Course Number: CETT 1457 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: Linear Integrated Circuits

This is a WECM Course Number.
Prerequisite Required: CETT 1429.
Course Description: In depth coverage of the characteristics, operations, stabilization, testing, and feedback techniques of linear integrated circuits. Application in computation, measurements, instrumentation, and active filtering. (3 Lec., 3 Lab.)

Course Number: CETT 2280 (2 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: Cooperative Education-Computer Engineering Technology/Technician

This is a WECM Course Number.
Prerequisite Required: Faculty Approval prior to registration.
Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 10 Ext.)

Course Number: CETT 2281 (2 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: Cooperative Education-Computer Engineering Technology/Technician

This is a WECM Course Number.
Prerequisite Required: Faculty Approval prior to registration.
Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 10 Ext.)

Course Number: CETT 2337 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC

Course Title: Microcomputer Control

This is a WECM Course Number.
Prerequisite Recommended: CETT 1425.
Course Description: A study of microprocessors and microcomputers with an emphasis on embedded controllers for industrial and commercial applications. Topics include RAM, ROM and input/output (I/O) interfacing. Introduction to programming. (2 Lec., 2 Lab.)

Course Number: CETT 2433 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC

Course Title: Digital Computer Circuits

This is a WECM Course Number.
Prerequisite Recommended: CETT 1429.
Course Description: Digital Computer circuits is a study of the three major component systems of a digital computer including arithmetic logic operations, RAM and ROM memory systems, and control systems. The student will explain the operation of the three basic sections of any computer system. The student will construct and troubleshoot computer circuits including arithmetic logic units, memory systems, and control systems; describe the function of the BIOS (Basic Input Output System) in a computer system; and how a computer knows what to address when first cold booted. (3 Lec., 3 Lab.)

Course Number: CETT 2435 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC

Course Title: Advanced Microprocessors

This is a WECM Course Number.
Prerequisite Recommended: CETT 1445.
Course Description: An advanced course utilizing the microprocessor in control systems and interfacing. Emphasis on microprocessor hardware and implementation of peripheral interfacing. (3 Lec., 3 Lab.)

Course Number: CETT 2480 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: Cooperative Education-Computer Engineering Technology/ Technician

This is a WECM Course Number.
Prerequisite Required: Faculty Approval prior to registration.
Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 26 Ext.)

Course Number: CETT 2481 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: Cooperative Education-Computer Engineering Technology/ Technician

This is a WECM Course Number.
Prerequisite Required: Faculty Approval prior to registration.
Course Description: Career-related activities encountered in the student’s area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 26 Ext.)

Course Number: EECT 1104 (1 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: Electronic Soldering

This is a WECM Course Number.
Course Description: The theory of tools and equipment for electronic soldering techniques. The student will select and use appropriate soldering tools and equipment, demonstrate proper soldering techniques, and practice safety procedures. Emphasis will be primarily on terminal and printed circuit board through-hole soldering. This course is cross-listed as EECT 1204. The student may register for either EECT 1104 or EECT 1204 but may receive credit for only one of the two. (2 Lab.)

Course Number: EECT 1191 (1 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: Special Topics In Electrical, Electronic And Communications Engineering Technology/Technician

This is a WECM Course Number.
Course Description: Topics in this course address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (1 Lec.)

Course Number: EECT 1403 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC

Course Title: Introduction to Telecommunications

This is a WECM Course Number.
Course Description: An overview of the telecommunications industry. Topics include the history of the telecommunications industry, terminology, rules and regulations and industry standards and protocols. This course is cross-listed as EECT 1303. The student may register for either EECT 1403 or EECT 1303 but may receive credit for only one of the two. (3 Lec., 3 Lab.)

Course Number: EECT 1407 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): ECC, MVC, NLC

Course Title: Convergence Technologies

This is a WECM Course Number.
Course Description: A study of telecommunications convergence technologies including telephone, LAN, WAN, wireless, voice, video, and internet protocol. This course is cross-listed as EECT 1307. The student may register for either EECT 1307 or EECT 1407 but may receive credit for only one of the two. (3 Lec., 4 Lab.)

Course Number: EECT 1491 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC

Course Title: Special Topics In Electrical, Electronic And Communications Engineering Technology/Technician

This is a WECM Course Number.
Course Description: Introduction to the use of structured wiring systems to provide access and versatility to configure wiring topologies in a business or home environment. Design, install, and test the various subsystems available to the technology for today''s high-tech business or home. Manage existing and emerging technologies in a business or home and establish a modular infrastructure for future innovations that will not only increase current value, but ensure its long-term viability. This course may be repeated if topics and learning outcomes vary. (3 Lec., 3 Lab.)

Course Number: ELMT 1405 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: Basic Fluid Power

This is a WECM Course Number.
Course Description: Basic fluid power course covering pneumatic and hydraulic systems, fluid power symbols, operating theory, components, and basic electrical and manual controls. (3 Lec., 3 Lab.)

Course Number: ELMT 2433 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC

Course Title: Industrial Electronics

This is a WECM Course Number.
Prerequisite Recommended: CETT 1429.
Course Description: This course is a study of devices, circuits, and systems primarily used in automated manufacturing and/or process control including computer controls and interfacing between mechanical, electrical, electronic, and computer equipment. Presentation of programming schemes. The student will describe how electronic input and output circuits are used to control automated manufacturing and/or process systems; identify basic elements used for input, output, timing, and control; define how programmable electronic systems use input data to alter output responses; troubleshoot a representative system; and demonstrate how system operation can be altered with software programming. (3 Lec., 3 Lab.)

Course Number: ENTC 1191 (1 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC

Course Title: Special Topics in Engineering Technology/Technician, General

This is a WECM Course Number.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (1 Lec.)

Course Number: ENTC 1280 (2 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: Cooperative Education - Engineering Technology, General

This is a WECM Course Number.
Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 10 Ext.)

Course Number: ENTC 1323 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC

Course Title: Strength of Materials

This is a WECM Course Number.
Course Description: Introduces the relationship between externally applied forces and internally induced stresses and the resulting deformations in structural members. (2 Lec., 2 Lab.)

Course Number: ENTC 1380 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC

Course Title: Cooperative Education - Engineering Technology, General

This is a WECM Course Number.
Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 20 Ext.)

Course Number: ENTC 1391 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC

Course Title: Special Topics In Engineering Technology, General

This is a WECM Course Number.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course is cross-listed as ENTC 1491. The student may register for either ENTC 1391 or ENTC 1491 but may receive credit for only one of the two. This course may be repeated if topics and learning outcomes vary. (2 Lec., 2 Lab.)

Course Number: ENTC 1491 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC

Course Title: Special Topics In Engineering Technology General

This is a WECM Course Number.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course is cross-listed as ENTC 1391. The student may register for either ENTC 1391 or ENTC 1491 but may receive credit for only one of the two. This course may be repeated if topics and learning outcomes vary. (2 Lec., 4 Lab.)

Course Number: ENTC 2280 (2 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC

Course Title: Cooperative Education - Engineering Technology, General

This is a WECM Course Number.
Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 10 Ext.)

Course Number: ENTC 2281 (2 Credit Hours) New course added June 19, 2023
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC, RLC

Course Title: Cooperative Education – Engineering Technology, General

This is a WECM Course Number.
Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec, 10 Ext.)

Course Number: ENTC 2380 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC

Course Title: Cooperative Education - Engineering Technology, General

This is a WECM Course Number.
Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 20 Ext.)

Course Number: HYDR 1345 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC

Course Title: Hydraulics and Pneumatics

This is a WECM Course Number.
Course Description: Discussion of the fundamentals of hydraulics and pneumatics, components of each system, and the operations, maintenance, and analysis of each system. This course is cross-listed as HYDR 1445. The student may register for either HYDR 1345 or HYDR 1445 but may receive credit for only one of the two. (2 Lec., 4 Lab.)

Course Number: HYDR 1445 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: Hydraulics and Pneumatics

This is a WECM Course Number.
Course Description: Discussion of the fundamentals of hydraulics and pneumatics, components of each system, and the operations, maintenance, and analysis of each system. This course is cross-listed as HYDR 1345. The student may register for either HYDR 1345 or HYDR 1445 but may receive credit for only one of the two. (3 Lec., 3 Lab.)

Course Number: INMT 1311 (3 Credit Hours)
Listed by Campus(es): CVC, NLC

Course Title: Computer Integrated Manufacturing

This is a WECM Course Number.
Course Description: A study of the principles and application of computer integrated manufacturing including integration of material handling, manufacturing, and computer hardware and programming. (3 Lec.)

Course Number: INMT 1319 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC

Course Title: Manufacturing Processes

This is a WECM Course Number.
Course Description: Exploration of a variety of methods used in manufacturing. Theory and application of processes including but not limited to metal forming, welding, machining, heat treating, plating, assembly procedures, and process control considerations, casting and injection molding. (2 Lec., 4 Lab.)

Course Number: INMT 1343 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC

Course Title: Computer Aided Design/Computer Aided Manufacturing (CAD/CAM)

This is a WECM Course Number.
Course Description: Computer-assisted applications in integrating engineering graphics and manufacturing. Emphasis on the conversion of a working drawing using computer aided design/computer aided manufacturing (CAD/CAM) software and related input and output devices to translate into machine code. (2 Lec., 4 Lab.)

Course Number: INMT 1417 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: Industrial Automation

This is a WECM Course Number.
Prerequisite Required: RBTC 1401 and INTC 1457.
Course Description: A study of the applications of industrial automation systems including identification of system requirements, equipment integration, motors, controllers, and sensors. Coverage of set-up, maintenance, and testing of the automated system. (3 Lec., 3 Lab.)

Course Number: INMT 2345 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC

Course Title: Industrial Troubleshooting

This is a WECM Course Number.
Course Description: An advanced study of the techniques used in troubleshooting various types of industrial equipment to include mechanical, electrical, hydraulic, and pneumatic systems and their control devices. Emphasis will be placed on the use of schematics and diagrams in conjunction with proper troubleshooting procedures. (2 Lec., 4 Lab.)

Course Number: INMT 2381 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC

Course Title: Cooperative Education-Manufacturing Technology/Technician

This is a WECM Course Number.
Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 20 Ext.)

Course Number: INTC 1307 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: Instrumentation Test Equipment

This is a WECM Course Number.
Prerequisite Recommended: Credit or concurrent enrollment in CETT 1405.
Course Description: Theory and application of instrumentation test equipment. Emphasizes accuracy, limitations of instruments, and calibration techniques. (2 Lec., 3 Lab.)

Course Number: INTC 1343 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC

Course Title: Application of Industrial Automatic Controls

This is a WECM Course Number.
Course Description: Automatic process control including measuring devices, analog and digital instrumentation, signal transmitters, recorders, alarms, controllers, control valves, and process and instrument diagrams. Includes connection and troubleshooting of loops. (2 Lec., 4 Lab.)

Course Number: INTC 1457 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: AC/DC Motor Control

This is a WECM Course Number.
Course Description: A study of electric motors and motor control devices common to a modern industrial environment. A presentation of motor characteristics with emphasis on starting, speed control, and stopping systems. (3 Lec., 3 Lab.)

Course Number: MCHN 1200 (2 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: Beginning Machine Shop

This is a WECM Course Number.
Course Description: Fundamental machine shop safety, math, and measurement. (1 Lec., 3 Lab.)

Course Number: MCHN 1319 (3 Credit Hours)
Listed by Campus(es): CVC, NLC

Course Title: Manufacturing Materials and Processes

This is a WECM Course Number.
Course Description: A basic study of various materials used in the manufacturing industry and the chemical, physical, and mechanical properties of various materials. Emphasis on manufacturing processes, including casting, forming and machining. (2 Lec., 4 Lab.)

Course Number: MCHN 1320 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, RLC

Course Title: Precision Tools and Measurement

This is a WECM Course Number.
Course Description: An introduction to the modern science of dimensional metrology. Emphasis on the identification, selection, and application of various types of precision instruments associated with the machining trade. Practice of basic layout and piece part measurements while using standard measuring tools. (2 Lec., 4 Lab.)

Course Number: MCHN 1326 (3 Credit Hours)
Listed by Campus(es): CVC, MVC, RLC

Course Title: Introduction to Computer-Aided Manufacturing (CAM)

This is a WECM Course Number.
Prerequisite Required: DFTG 2350, MCHN 2331, MCHN 2334, MCHN 1338.
Course Description: A study of Computer-Aided Manufacturing (CAM) software which is used to develop applications for manufacturing. Emphasis on tool geometry, tool selection and the tool library. (1 Lec., 6 Lab.)

Course Number: MCHN 1338 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, RLC

Course Title: Basic Machine Shop I

This is a WECM Course Number.
Prerequisite Required: DFTG 1409, MCHN 1200, MCHN 1320.
Course Description: A course that introduces the student to machining fundamentals. The student will use basic machine tools including the lathe, milling machine, drill press, power saw, and bench grinder. Machine terminology, theory, math, part layout, and bench work using common measuring tools is included. Emphasis is placed on shop safety, housekeeping, and preventative maintenance. This course is cross-listed as MCHN 1438. The student may register for either MCHN 1338 or MCHN 1438 but may receive credit for only one of the two. (1 Lec., 6 Lab.)

Course Number: MCHN 1343 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC

Course Title: Machine Shop Mathematics

This is a WECM Course Number.
Course Description: Designed to prepare the student with technical, applied mathematics that will be necessary in future machine shop-related courses. (2 Lec., 4 Lab.)

Course Number: MCHN 1352 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC

Course Title: Intermediate Machining I

This is a WECM Course Number.
Prerequisite Required: MCHN 1338.
Course Description: Operation of drilling machines, milling machines, lathes, and power saws. Select and use appropriate precision measuring tools. (1 Lec., 6 Lab.)

Course Number: MCHN 1370 (3 Credit Hours) New course added June 6, 2023
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC

Course Title: Automated Machined Parts Inspection

This is a Local Need Course.
Course Description: Set-up, programming, operation, and troubleshooting of Coordinate Measuring Machines (CMM) and inspection arms for automated inspection of precision machined parts. (1 Lec., 6 Lab.)

Course Number: MCHN 1393 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC

Course Title: Special Topics in Tool and Die Maker/Technologist

This is a WECM Course Number.
Prerequisite Recommended: MCHN 1326, MCHN 1352.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (1 Lec., 5 Lab.)

Course Number: MCHN 1438 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC

Course Title: Basic Machine Shop I

This is a WECM Course Number.
Course Description: A course that introduces the student to machining fundamentals. The student begins by using basic machine tools including the lathe, milling machine, drill press, power saw, and bench grinder. Machine terminology, theory, math, part layout, and bench work using common measuring tools is included. Emphasis is placed on shop safety, housekeeping, and preventative maintenance. This course is cross-listed as MCHN 1338. The student may register for either MCHN 1338 or MCHN 1438 but may receive credit for only one of the two. (2 Lec., 6 Lab.)

Course Number: MCHN 1454 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC

Course Title: Intermediate Machining II

This is a WECM Course Number.
Course Description: Development of job process plan to include operation of lathes, milling machines, drill press machines, and power saws. Set-up, layout, and tool maintenance is included. Emphasis on shop safety and preventative maintenance. (2 Lec., 6 Lab.)

Course Number: MCHN 2331 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, RLC

Course Title: Operation of CNC Turning Centers

This is a WECM Course Number.
Prerequisite Required: MCHN 1200, MCHN 1320.
Course Description: CNC operations with an emphasis on turning centers. This course is cross-listed as MCHN 2431. The student may register for either MCHN 2331 or MCHN 2431 but may receive credit for only one of the two. (1 Lec., 6 Lab.)

Course Number: MCHN 2334 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, RLC

Course Title: Operation of CNC Machining Centers

This is a WECM Course Number.
Prerequisite Required: MCHN 1200, MCHN 1320.
Course Description: CNC operations with an emphasis on machining centers. Set up and operate CNC machining centers; set machine and tool offsets for machining operations; and edit the program as required. (1 Lec., 6 Lab.)

Course Number: MCHN 2335 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC

Course Title: Advanced CNC Machining

This is a WECM Course Number.
Prerequisite Required: MCHN 1326, MCHN 1352.
Course Description: Advanced CNC operations with an emphasis on programming and operations of machining and turning centers. [This course is cross-listed as MCHN 2435. The student may register for either MCHN 2335 or MCHN 2435 but may receive credit for only one of the two. (1 Lec., 6 Lab.)

Course Number: MCHN 2338 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC

Course Title: Advanced Computer-Aided Manufacturing (CAM)

This is a WECM Course Number.
Prerequisite Recommended: INMT 1343.
Course Description: A study of advanced techniques in Computer-Aided Manufacturing (CAM). (1 Lec., 6 Lab.)

Course Number: MCHN 2380 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, RLC

Course Title: Cooperative Education - Machine Tool Technology/Machinist

This is a WECM Course Number.
Prerequisite Required: Faculty Approval required prior to registration.
Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 16 Ext.)

Course Number: MCHN 2431 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC
(This course is Single-Course Delivery within Dallas College. Single-Course Delivery courses do not qualify for Financial Aid.)

Course Title: Operation of CNC Turning Centers

This is a WECM Course Number.
Course Description: CNC operations with an emphasis on turning centers. This course is cross-listed as MCHN 2331. The student may register for either MCHN 2331 or MCHN 2431 but may receive credit for only one of the two. (2 Lec., 4 Lab.)

Course Number: MCHN 2434 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC
(This course is Single-Course Delivery within Dallas College. Single-Course Delivery courses do not qualify for Financial Aid.)

Course Title: Operation of CNC Machining Centers

This is a WECM Course Number.
Course Description: A study of CNC operations with an emphasis on vertical machining centers. (2 Lec., 4 Lab.)

Course Number: MCHN 2435 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC

Course Title: Advanced CNC Machining

This is a WECM Course Number.
Course Description: Advanced CNC operation with an emphasis on programming and operations of machining and turning centers. This course is cross-listed as MCHN 2435. The student may register for either MCHN 2335 or MCHN 2435 but may receive credit for only one of the two. (2 Lec., 6 Lab.)

Course Number: MCHN 2441 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC

Course Title: Advanced Machining I

This is a WECM Course Number.
Course Description: A study of advanced lathe and milling operations. Emphasis on advanced cutting operations of the lathe and milling machines, including the use of special tooling, bench assembly, and materials identification. (2 Lec., 4 Lab.)

Course Number: MCHN 2447 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC

Course Title: Specialized Tools and Fixtures

This is a WECM Course Number.
Prerequisite Required: MCHN 1352, MCHN 1326, MCHN 2331.
Course Description: An advanced course in the designing and building of special tools, such as jigs, fixtures, punch press dies, and molds. Machining and assembling of a production tool using conventional machine shop equipment. Application of production tool theory, care, and maintenance. (2 Lec., 6 Lab.)

Course Number: MFGT 1302 (3 Credit Hours)
Listed by Campus(es): CVC, NLC

Course Title: Introduction to Automated Manufacturing

This is a WECM Course Number.
Course Description: Overview of automated manufacturing principles; including manufacturing process, control systems, and measurement theory. (2 Lec., 4 Lab.)

Course Number: MFGT 1404 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC

Course Title: Automated Manufacturing

This is a WECM Course Number.
Course Description: This course is an introduction to electrical and electronic principles utilized in automated manufacturing processes. Students will describe microcontroller applications in manufacturing; identify electrical/electronic components, circuits, and schematics/diagrams used in manufacturing; describe operations and applications of sensors and actuators used in manufacturing; apply interfacing techniques used in manufacturing; and apply programming techniques used with microcontrollers. (3 Lec., 3 Lab.)

Course Number: MFGT 1406 (4 Credit Hours)
Listed by Campus(es): CVC, EFC, MVC

Course Title: Mechanical Principles in Automated Manufacturing

This is a WECM Course Number.
Course Description: This course is an overview of mechanical principles used in automated manufacturing. Topics covered include common measurement methods, engineering drawings, and mechanical methods used in automated manufacturing. Students will apply measurement techniques used in manufacturing; interpret engineering drawings used in product data management; identify mechanical systems and equipment used in advanced manufacturing; identify safety issues in manufacturing; describe hand tools and maintenance issues of manufacturing; demonstrate material assembly; and describe operations and applications of pneumatic, electro-pneumatic, hydraulic, and electro-hydraulic controls. (3 Lec., 3 Lab.)

Course Number: MFGT 2459 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC

Course Title: Industrial Automation II

This is a WECM Course Number.
Prerequisite Required: ELPT 2419.
Course Description: Advanced topics in automated manufacturing. Includes electrical and electronic principles, electro-pneumatic and electro-hydraulic controls, logic control methods, and basic programming techniques. (3 Lec., 3 Lab.)

Course Number: RBTC 1343 (3 Credit Hours) New course added June 19, 2023
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC, RLC

Course Title: Robotics

This is a WECM Course Number.
Course Description: Principles and applications of robots. Includes installation, interfacing, programming, maintenance, and safety of robots and robotic cells. (2 Lec., 4 Lab.)

Course Number: RBTC 1401 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: Programmable Logic Controllers

This is a WECM Course Number.
Course Description: A study in programmable logic controllers (PLC). Topics include processor units, numbering systems, memory organizations, relay-type devices, timers, counters, data manipulators, and programming. (3 Lec., 3 Lab.)

Course Number: RBTC 1405 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: Robotics Fundamentals

This is a WECM Course Number.
Prerequisite Required: RBTC 1401.
Course Description: An introduction to flexible automation. Topics include installation, repair, maintenance, and development of flexible robotic manufacturing systems. (3 Lec., 3 Lab.)

Course Number: RBTC 1451 (4 Credit Hours) New course added June 19, 2023
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC

Course Title: Robotics Mechanisms

This is a WECM Course Number.
Course Description: The application of principles and the calculation of practical problems involving four bar linkages, cams, gears, and gear trains. Topics include vector quantities, angular displacement, motion concepts, velocities, and motions. (3 Lec., 3 Lab.)

Course Number: RBTC 2445 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC, RLC

Course Title: Robot Application, Set-Up And Testing

This is a WECM Course Number.
Course Description: A course that provides the student with laboratory experience in the installation, set-up, and testing of robotic cells. Topics include maintenance. (3 Lec., 3 Lab.)