2020 - 2021 Catalog
Course Descriptions for Advanced Manufacturing/Engineering
Course Number: ARCE 1303 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, NLC
Course Description: Properties, specifications, vendor references, and uses of materials as related to architectural systems of structures. (3 Lec.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, NLC
Course Title: Architectural Materials and Methods of Construction
This is a WECM Course Number.Course Description: Properties, specifications, vendor references, and uses of materials as related to architectural systems of structures. (3 Lec.)
Course Number: ARCE 1421 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Description: Architectural drawing and sketching. Emphasizes freehand drawing, perspectives, delineation in various media, and development of students' graphical expression. Includes an introduction to various reproduction methods. (2 Lec., 6 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Title: Architectural Illustration
This is a WECM Course Number.Course Description: Architectural drawing and sketching. Emphasizes freehand drawing, perspectives, delineation in various media, and development of students' graphical expression. Includes an introduction to various reproduction methods. (2 Lec., 6 Lab.)
Course Number: ARCE 1452 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Description: A study of structural systems including concrete foundations and frames, wood framing and trusses, and structural steel framing systems. Includes detailing of concrete, wood, and steel to meet industry standards including the American Institute of Steel Construction and The American Concrete Institute. (2 Lec., 5 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Title: Structural Drafting
This is a WECM Course Number.Course Description: A study of structural systems including concrete foundations and frames, wood framing and trusses, and structural steel framing systems. Includes detailing of concrete, wood, and steel to meet industry standards including the American Institute of Steel Construction and The American Concrete Institute. (2 Lec., 5 Lab.)
Course Number: ARCE 2452 (4 Credit Hours) New course added May 27, 2020
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Description: Preparation of drawings for mechanical, electrical, and plumbing (MEP) systems with emphasis on applicable building and energy codes, product references, and specifications for construction. (2 Lec., 4 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Title: Mechanical, Electrical and Plumbing (MEP) Systems
This is a WECM Course Number.Course Description: Preparation of drawings for mechanical, electrical, and plumbing (MEP) systems with emphasis on applicable building and energy codes, product references, and specifications for construction. (2 Lec., 4 Lab.)
Course Number: CETT 1303 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Description: A study of the fundamentals of direct current including Ohm's law, Kirchhoff's laws and circuit analysis techniques. This course is cross-listed as CETT 1403. The student may register for either CETT 1303 or CETT 1403 but may receive credit for only one of the two. (2 Lec., 2 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: DC Circuits
This is a WECM Course Number.Course Description: A study of the fundamentals of direct current including Ohm's law, Kirchhoff's laws and circuit analysis techniques. This course is cross-listed as CETT 1403. The student may register for either CETT 1303 or CETT 1403 but may receive credit for only one of the two. (2 Lec., 2 Lab.)
Course Number: CETT 1305 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Description: A study of the fundamentals of alternating current including series and parallel AC circuits, phasors, capacitive and inductive networks, transformers, and resonance. (2 Lec., 2 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: AC Circuits
This is a WECM Course Number.Course Description: A study of the fundamentals of alternating current including series and parallel AC circuits, phasors, capacitive and inductive networks, transformers, and resonance. (2 Lec., 2 Lab.)
Course Number: CETT 1357 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Description: A study of the characteristics, operations, and testing of linear integrated circuits. Applications include instrumentation and active filtering. (2 Lec., 4 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Linear Integrated Circuits
This is a WECM Course Number.Course Description: A study of the characteristics, operations, and testing of linear integrated circuits. Applications include instrumentation and active filtering. (2 Lec., 4 Lab.)
Course Number: CETT 1403 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Course Description: A study of the fundamentals of direct current including Ohm's law, Kirchhoff's laws and circuit analysis techniques. Emphasis on circuit analysis of resistive networks and DC measurements. This course is cross-listed as CETT 1303. The student may register for either CETT 1303 or CETT 1403 but may receive credit for only one of the two. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Course Title: DC Circuits
This is a WECM Course Number.Course Description: A study of the fundamentals of direct current including Ohm's law, Kirchhoff's laws and circuit analysis techniques. Emphasis on circuit analysis of resistive networks and DC measurements. This course is cross-listed as CETT 1303. The student may register for either CETT 1303 or CETT 1403 but may receive credit for only one of the two. (3 Lec., 3 Lab.)
Course Number: CETT 1405 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Prerequisite Recommended: CETT 1403.
Course Description: A study of the fundamentals of alternating current including series and parallel AC circuits, phasors, capacitive and inductive networks, transformers, and resonance. This course is cross-listed as CETT 1305. The student may register for either CETT 1405 or CETT 1305 but may receive credit for only one of the two (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Course Title: AC Circuits
This is a WECM Course Number.Prerequisite Recommended: CETT 1403.
Course Description: A study of the fundamentals of alternating current including series and parallel AC circuits, phasors, capacitive and inductive networks, transformers, and resonance. This course is cross-listed as CETT 1305. The student may register for either CETT 1405 or CETT 1305 but may receive credit for only one of the two (3 Lec., 3 Lab.)
Course Number: CETT 1407 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC
Course Description: Applies concepts of electricity, electronics, and digital fundamentals; supports programs requiring a general knowledge of electronics. Students will build and test circuits using analog and digital components; visually identify components and component values; build and test series and parallel resistive circuits; check resistors, diodes, and transistors using a multimeter. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC
Course Title: Fundamentals of Electronics
This is a WECM Course Number.Course Description: Applies concepts of electricity, electronics, and digital fundamentals; supports programs requiring a general knowledge of electronics. Students will build and test circuits using analog and digital components; visually identify components and component values; build and test series and parallel resistive circuits; check resistors, diodes, and transistors using a multimeter. (3 Lec., 3 Lab.)
Course Number: CETT 1425 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Course Description: An entry-level course in digital electronics to include numbering systems, logic gates, Boolean algebra, and combinational logic This course is cross-listed as CETT 1325. The student may register for either CETT 1425 or CETT 1325 but may receive credit for only one of the two. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Course Title: Digital Fundamentals
This is a WECM Course Number.Course Description: An entry-level course in digital electronics to include numbering systems, logic gates, Boolean algebra, and combinational logic This course is cross-listed as CETT 1325. The student may register for either CETT 1425 or CETT 1325 but may receive credit for only one of the two. (3 Lec., 3 Lab.)
Course Number: CETT 1429 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Prerequisite Recommended: CETT 1403 and credit or concurrent enrollment in CETT 1405.
Course Description: A study of diodes, transistor characteristics and other semiconductor devices, including analysis of static and dynamic characteristics, biasing techniques, and thermal considerations. This course is cross-listed as CETT 1329. The student may register for either CETT 1429 or CETT 1329 but may receive credit for only one of the two. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Course Title: Solid State Devices
This is a WECM Course Number.Prerequisite Recommended: CETT 1403 and credit or concurrent enrollment in CETT 1405.
Course Description: A study of diodes, transistor characteristics and other semiconductor devices, including analysis of static and dynamic characteristics, biasing techniques, and thermal considerations. This course is cross-listed as CETT 1329. The student may register for either CETT 1429 or CETT 1329 but may receive credit for only one of the two. (3 Lec., 3 Lab.)
Course Number: CETT 1441 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Prerequisite Recommended: CETT 1429.
Course Description: A study of various semiconductor devices incorporated in circuits and their applications. Emphasis on circuit construction, measurements, and analysis. Topics will include JFETs, MOSFETs, oscillators, thyristors, power supply systems, voltage regulators, multistage amplifiers and power amplifiers. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Title: Solid State Circuits
This is a WECM Course Number.Prerequisite Recommended: CETT 1429.
Course Description: A study of various semiconductor devices incorporated in circuits and their applications. Emphasis on circuit construction, measurements, and analysis. Topics will include JFETs, MOSFETs, oscillators, thyristors, power supply systems, voltage regulators, multistage amplifiers and power amplifiers. (3 Lec., 3 Lab.)
Course Number: CETT 1449 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Prerequisite Recommended: CETT 1429.
Course Description: Digital Systems is a course in electronics covering digital systems. Emphasis on application and troubleshooting digital systems using counters, registers, code converters, multiplexers, analog-to-digital circuits, digital-to-analog circuits, and large-scale integrated circuits. The student will evaluate the operation of digital systems while operating in correct and fault mode using various test instruments; describe the difference between a digital system and an analog system; and draw a simple block diagram of a digital computer system. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Title: Digital Systems
This is a WECM Course Number.Prerequisite Recommended: CETT 1429.
Course Description: Digital Systems is a course in electronics covering digital systems. Emphasis on application and troubleshooting digital systems using counters, registers, code converters, multiplexers, analog-to-digital circuits, digital-to-analog circuits, and large-scale integrated circuits. The student will evaluate the operation of digital systems while operating in correct and fault mode using various test instruments; describe the difference between a digital system and an analog system; and draw a simple block diagram of a digital computer system. (3 Lec., 3 Lab.)
Course Number: CETT 1457 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Prerequisite Recommended: CETT 1429.
Course Description: In depth coverage of the characteristics, operations, stabilization, testing, and feedback techniques of linear integrated circuits. Application in computation, measurements, instrumentation, and active filtering. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Course Title: Linear Integrated Circuits
This is a WECM Course Number.Prerequisite Recommended: CETT 1429.
Course Description: In depth coverage of the characteristics, operations, stabilization, testing, and feedback techniques of linear integrated circuits. Application in computation, measurements, instrumentation, and active filtering. (3 Lec., 3 Lab.)
Course Number: CETT 2337 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Prerequisite Recommended: CETT 1425.
Course Description: A study of microprocessors and microcomputers with an emphasis on embedded controllers for industrial and commercial applications. Topics include RAM, ROM and input/output (I/O) interfacing. Introduction to programming. (2 Lec., 2 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Microcomputer Control
This is a WECM Course Number.Prerequisite Recommended: CETT 1425.
Course Description: A study of microprocessors and microcomputers with an emphasis on embedded controllers for industrial and commercial applications. Topics include RAM, ROM and input/output (I/O) interfacing. Introduction to programming. (2 Lec., 2 Lab.)
Course Number: CETT 2433 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Prerequisite Recommended: CETT 1429.
Course Description: Digital Computer circuits is a study of the three major component systems of a digital computer including arithmetic logic operations, RAM and ROM memory systems, and control systems. The student will explain the operation of the three basic sections of any computer system. The student will construct and troubleshoot computer circuits including arithmetic logic units, memory systems, and control systems; describe the function of the BIOS (Basic Input Output System) in a computer system; and how a computer knows what to address when first cold booted. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Title: Digital Computer Circuits
This is a WECM Course Number.Prerequisite Recommended: CETT 1429.
Course Description: Digital Computer circuits is a study of the three major component systems of a digital computer including arithmetic logic operations, RAM and ROM memory systems, and control systems. The student will explain the operation of the three basic sections of any computer system. The student will construct and troubleshoot computer circuits including arithmetic logic units, memory systems, and control systems; describe the function of the BIOS (Basic Input Output System) in a computer system; and how a computer knows what to address when first cold booted. (3 Lec., 3 Lab.)
Course Number: CETT 2435 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Prerequisite Recommended: CETT 1445.
Course Description: An advanced course utilizing the microprocessor in control systems and interfacing. Emphasis on microprocessor hardware and implementation of peripheral interfacing. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Title: Advanced Microprocessors
This is a WECM Course Number.Prerequisite Recommended: CETT 1445.
Course Description: An advanced course utilizing the microprocessor in control systems and interfacing. Emphasis on microprocessor hardware and implementation of peripheral interfacing. (3 Lec., 3 Lab.)
Course Number: CETT 2480 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC
Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 26 Ext.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC
Course Title: Cooperative Education-Computer Engineering Technology/ Technician
This is a WECM Course Number.Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 26 Ext.)
Course Number: CETT 2481 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC
Course Description: Career-related activities encountered in the student’s area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 26 Ext.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC
Course Title: Cooperative Education-Computer Engineering Technology/ Technician
This is a WECM Course Number.Course Description: Career-related activities encountered in the student’s area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 26 Ext.)
Course Number: CPMT 1403 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Description: A fundamental computer course that provides explanation of the procedures to utilize hardware and software. Emphasis on terminology, acronyms, and hands-on activities. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Title: Introduction to Computer Technology
This is a WECM Course Number.Course Description: A fundamental computer course that provides explanation of the procedures to utilize hardware and software. Emphasis on terminology, acronyms, and hands-on activities. (3 Lec., 3 Lab.)
Course Number: CPMT 1404 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC
Course Description: In this course the students will develop skills in the installation, configuration, maintenance and troubleshooting of system software in microcomputers. Topics covered may include operating systems, utility software and other software affecting the basic operation of a microcomputer system. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC
Course Title: Microcomputer System Software
This is a WECM Course Number.Course Description: In this course the students will develop skills in the installation, configuration, maintenance and troubleshooting of system software in microcomputers. Topics covered may include operating systems, utility software and other software affecting the basic operation of a microcomputer system. (3 Lec., 3 Lab.)
Course Number: CPMT 1443 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC
Course Description: Computer characteristics and subsystem operations, timing, control circuits, and internal input/output controls. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC
Course Title: Microcomputer Architecture
This is a WECM Course Number.Course Description: Computer characteristics and subsystem operations, timing, control circuits, and internal input/output controls. (3 Lec., 3 Lab.)
Course Number: CPMT 1449 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC
Prerequisite Recommended: CETT 1403.
Course Description: This is a beginning course in computer networks with focus on networking fundamentals, terminology, hardware, software, and network architecture. A study of local/wide area networking concepts and networking installations and operations. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC
Course Title: Computer Networking Technology
This is a WECM Course Number.Prerequisite Recommended: CETT 1403.
Course Description: This is a beginning course in computer networks with focus on networking fundamentals, terminology, hardware, software, and network architecture. A study of local/wide area networking concepts and networking installations and operations. (3 Lec., 3 Lab.)
Course Number: CPMT 1451 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): BHC, ECC, MVC, NLC, RLC
Course Description: An introduction to the computer hardware and software skills needed to help meet the growing demand for entry-level information and communication technology (ICT) professionals. The curriculum covers the fundamentals of PC technology, networking, and security, and also provides an introduction to advanced concepts. Hands-on labs and Virtual Laptop and Virtual Desktop learning tools help students develop critical thinking and complex problem-solving skills. Cisco Packet Tracer simulation-based learning activities promote the exploration of network and networking security concepts and allow students to experiment with network behavior. Licensing/Certification Agency: Cisco. (3 Lec., 4 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): BHC, ECC, MVC, NLC, RLC
Course Title: IT Essentials: PC Hardware and Software
This is a WECM Course Number.Course Description: An introduction to the computer hardware and software skills needed to help meet the growing demand for entry-level information and communication technology (ICT) professionals. The curriculum covers the fundamentals of PC technology, networking, and security, and also provides an introduction to advanced concepts. Hands-on labs and Virtual Laptop and Virtual Desktop learning tools help students develop critical thinking and complex problem-solving skills. Cisco Packet Tracer simulation-based learning activities promote the exploration of network and networking security concepts and allow students to experiment with network behavior. Licensing/Certification Agency: Cisco. (3 Lec., 4 Lab.)
Course Number: CPMT 2350 (3 Credit Hours) New course added June 8, 2020
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): ECC
Course Description: Overview of the objectives for industry specific certification exam(s). (2 Lec., 4 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): ECC
Course Title: Industry Certification Preparation
This is a WECM Course Number.Course Description: Overview of the objectives for industry specific certification exam(s). (2 Lec., 4 Lab.)
Course Number: CPMT 2445 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC
Prerequisite Recommended: CETT 1429.
Course Description: This course covers principles and practices involved in computer system troubleshooting techniques and repair procedures including advanced diagnostic test programs and the use of specialized test equipment. The student will develop hardware and software troubleshooting techniques and perform procedures used in troubleshooting. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC
Course Title: Computer System Troubleshooting
This is a WECM Course Number.Prerequisite Recommended: CETT 1429.
Course Description: This course covers principles and practices involved in computer system troubleshooting techniques and repair procedures including advanced diagnostic test programs and the use of specialized test equipment. The student will develop hardware and software troubleshooting techniques and perform procedures used in troubleshooting. (3 Lec., 3 Lab.)
Course Number: EECT 1104 (1 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Description: The theory of tools and equipment for electronic soldering techniques. The student will select and use appropriate soldering tools and equipment, demonstrate proper soldering techniques, and practice safety procedures. Emphasis will be primarily on terminal and printed circuit board through-hole soldering. This course is cross-listed as EECT 1204. The student may register for either EECT 1104 or EECT 1204 but may receive credit for only one of the two. (2 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Title: Electronic Soldering
This is a WECM Course Number.Course Description: The theory of tools and equipment for electronic soldering techniques. The student will select and use appropriate soldering tools and equipment, demonstrate proper soldering techniques, and practice safety procedures. Emphasis will be primarily on terminal and printed circuit board through-hole soldering. This course is cross-listed as EECT 1204. The student may register for either EECT 1104 or EECT 1204 but may receive credit for only one of the two. (2 Lab.)
Course Number: EECT 1191 (1 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Description: Topics in this course address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (1 Lec.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Title: Special Topics In Electrical, Electronic And Communications Engineering Technology/Technician
This is a WECM Course Number.Course Description: Topics in this course address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (1 Lec.)
Course Number: EECT 1403 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC
Course Description: An overview of the telecommunications industry. Topics include the history of the telecommunications industry, terminology, rules and regulations and industry standards and protocols. This course is cross-listed as EECT 1303. The student may register for either EECT 1403 or EECT 1303 but may receive credit for only one of the two. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC
Course Title: Introduction to Telecommunications
This is a WECM Course Number.Course Description: An overview of the telecommunications industry. Topics include the history of the telecommunications industry, terminology, rules and regulations and industry standards and protocols. This course is cross-listed as EECT 1303. The student may register for either EECT 1403 or EECT 1303 but may receive credit for only one of the two. (3 Lec., 3 Lab.)
Course Number: EECT 1407 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): ECC, MVC, NLC
Course Description: A study of telecommunications convergence technologies including telephone, LAN, WAN, wireless, voice, video, and internet protocol. This course is cross-listed as EECT 1307. The student may register for either EECT 1307 or EECT 1407 but may receive credit for only one of the two. (3 Lec., 4 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): ECC, MVC, NLC
Course Title: Convergence Technologies
This is a WECM Course Number.Course Description: A study of telecommunications convergence technologies including telephone, LAN, WAN, wireless, voice, video, and internet protocol. This course is cross-listed as EECT 1307. The student may register for either EECT 1307 or EECT 1407 but may receive credit for only one of the two. (3 Lec., 4 Lab.)
Course Number: EECT 1491 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Description: Introduction to the use of structured wiring systems to provide access and versatility to configure wiring topologies in a business or home environment. Design, install, and test the various subsystems available to the technology for today''s high-tech business or home. Manage existing and emerging technologies in a business or home and establish a modular infrastructure for future innovations that will not only increase current value, but ensure its long-term viability. This course may be repeated if topics and learning outcomes vary. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Title: Special Topics In Electrical, Electronic And Communications Engineering Technology/Technician
This is a WECM Course Number.Course Description: Introduction to the use of structured wiring systems to provide access and versatility to configure wiring topologies in a business or home environment. Design, install, and test the various subsystems available to the technology for today''s high-tech business or home. Manage existing and emerging technologies in a business or home and establish a modular infrastructure for future innovations that will not only increase current value, but ensure its long-term viability. This course may be repeated if topics and learning outcomes vary. (3 Lec., 3 Lab.)
Course Number: ELMT 1405 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Description: Basic fluid power course covering pneumatic and hydraulic systems, fluid power symbols, operating theory, components, and basic electrical and manual controls. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Title: Basic Fluid Power
This is a WECM Course Number.Course Description: Basic fluid power course covering pneumatic and hydraulic systems, fluid power symbols, operating theory, components, and basic electrical and manual controls. (3 Lec., 3 Lab.)
Course Number: ELPT 1215 (2 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Description: Introduction to mathematical applications utilized to solve problems in the electrical field. Topics include fractions, decimals, percentages, simple equations, ratio and proportion, unit conversions, and applied geometry. (1 Lec, 2 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Title: Electrical Calculations I
This is a WECM Course Number.Course Description: Introduction to mathematical applications utilized to solve problems in the electrical field. Topics include fractions, decimals, percentages, simple equations, ratio and proportion, unit conversions, and applied geometry. (1 Lec, 2 Lab.)
Course Number: ELPT 1311 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Description: Basic theory and practice of electrical circuits. Includes calculations as applied to alternating and direct current. This course is cross-listed as ELPT 1411. The student may register for either ELPT 1311 or ELPT 1411 but may receive credit for only one of the two. (2 Lec., 2 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Title: Basic Electrical Theory
This is a WECM Course Number.Course Description: Basic theory and practice of electrical circuits. Includes calculations as applied to alternating and direct current. This course is cross-listed as ELPT 1411. The student may register for either ELPT 1311 or ELPT 1411 but may receive credit for only one of the two. (2 Lec., 2 Lab.)
Course Number: ELPT 1319 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Description: An introduction to basic direct current (DC) theory including electron theory and direct current applications. Lab required. (2 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Title: Fundamentals of Electricity I
This is a WECM Course Number.Course Description: An introduction to basic direct current (DC) theory including electron theory and direct current applications. Lab required. (2 Lec., 3 Lab.)
Course Number: ELPT 1320 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Description: Introduces alternating current (AC). Includes AC voltage, frequency, mechanical and electrical degrees, waveforms, resistors, capacitors, and inductors. Basic theory and practice of electrical circuits. Includes calculations as applied to alternating and direct current. (2 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Title: Fundamentals of Electricity II
This is a WECM Course Number.Course Description: Introduces alternating current (AC). Includes AC voltage, frequency, mechanical and electrical degrees, waveforms, resistors, capacitors, and inductors. Basic theory and practice of electrical circuits. Includes calculations as applied to alternating and direct current. (2 Lec., 3 Lab.)
Course Number: ELPT 1321 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Description: Safety rules and regulations. Includes the selection, inspection, use, and maintenance of common tools for electricians. This course is cross-listed as ELPT 1221. The student may register for either ELPT 1321 or ELPT 1221 but may receive credit for only one of the two. (2 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Title: Introduction to Electrical Safety and Tools
This is a WECM Course Number.Course Description: Safety rules and regulations. Includes the selection, inspection, use, and maintenance of common tools for electricians. This course is cross-listed as ELPT 1221. The student may register for either ELPT 1321 or ELPT 1221 but may receive credit for only one of the two. (2 Lec., 3 Lab.)
Course Number: ELPT 1325 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Description: An introductory study of the National Electric Code (NEC) for those employed in fields requiring knowledge of the Code. Emphasis on wiring design, protection, methods, and materials; equipment for general use; and basic calculations. (2 Lec., 2 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Title: National Electrical Code I
This is a WECM Course Number.Course Description: An introductory study of the National Electric Code (NEC) for those employed in fields requiring knowledge of the Code. Emphasis on wiring design, protection, methods, and materials; equipment for general use; and basic calculations. (2 Lec., 2 Lab.)
Course Number: ELPT 1329 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Description: Wiring methods for single family and multi-family dwellings. Includes load calculations, service entrance sizing, proper grounding techniques, and associated safety procedures. (2 Lec., 2 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Title: Residential Wiring
This is a WECM Course Number.Course Description: Wiring methods for single family and multi-family dwellings. Includes load calculations, service entrance sizing, proper grounding techniques, and associated safety procedures. (2 Lec., 2 Lab.)
Course Number: ELPT 1341 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Description: Operating principles of solid-state and conventional controls along with their practical applications. Includes braking, jogging, plugging, safety interlocks, wiring, and schematic diagram interpretations This course is cross-listed as ELPT 1441. The student may register for either ELPT 1327 or ELPT 1441 but may receive credit for only one of the two. (2 Lec., 2 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Title: Motor Control
This is a WECM Course Number.Course Description: Operating principles of solid-state and conventional controls along with their practical applications. Includes braking, jogging, plugging, safety interlocks, wiring, and schematic diagram interpretations This course is cross-listed as ELPT 1441. The student may register for either ELPT 1327 or ELPT 1441 but may receive credit for only one of the two. (2 Lec., 2 Lab.)
Course Number: ELPT 1345 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Description: Commercial wiring methods. Includes overcurrent protection, raceway panel board installation, proper grounding techniques, and associated safety procedures. (2 Lec., 2 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Title: Commercial Wiring
This is a WECM Course Number.Course Description: Commercial wiring methods. Includes overcurrent protection, raceway panel board installation, proper grounding techniques, and associated safety procedures. (2 Lec., 2 Lab.)
Course Number: ELPT 1357 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Description: Wiring methods used for industrial installations. Includes motor circuits, raceway and bus way installations, proper grounding techniques, and associated safety procedures. (2 Lec., 2 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Title: Industrial Wiring
This is a WECM Course Number.Course Description: Wiring methods used for industrial installations. Includes motor circuits, raceway and bus way installations, proper grounding techniques, and associated safety procedures. (2 Lec., 2 Lab.)
Course Number: ELPT 1370 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Description: Blueprint reading covering the theory of projection, architectural and engineering symbols, relationship of views, and measuring with as they relate to the electrical construction industry. (3 Lec.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Title: Electrical Blueprint Reading
This is a Local Need Course.Course Description: Blueprint reading covering the theory of projection, architectural and engineering symbols, relationship of views, and measuring with as they relate to the electrical construction industry. (3 Lec.)
Course Number: ELPT 1391 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (2 Lec., 2 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Title: Special Topics in Electrical and Power Transmission Installer, General
This is a WECM Course Number.Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (2 Lec., 2 Lab.)
Course Number: ELPT 2325 (3 Credit Hours) New course added June 12, 2020
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Description: In-depth coverage of the National Electrical Code (NEC) for those employed in fields requiring knowledge of the Code. Emphasis on wiring protection and methods, special conditions, and advanced calculations. (2 Lec., 2 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Title: National Electrical Code II
This is a WECM Course Number.Course Description: In-depth coverage of the National Electrical Code (NEC) for those employed in fields requiring knowledge of the Code. Emphasis on wiring protection and methods, special conditions, and advanced calculations. (2 Lec., 2 Lab.)
Course Number: ELPT 2419 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Description: Fundamental concepts of programmable logic controllers, principles of operation, and numbering systems as applied to electrical controls. Students will identify and describe digital logic circuits and explain numbering systems; explain the operation of programmable logic controllers; convert ladder diagrams into programs; incorporate timers and counters utilizing programmable logic controllers; and execute and evaluate programs. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Title: Programmable Logic Controllers I
This is a WECM Course Number.Course Description: Fundamental concepts of programmable logic controllers, principles of operation, and numbering systems as applied to electrical controls. Students will identify and describe digital logic circuits and explain numbering systems; explain the operation of programmable logic controllers; convert ladder diagrams into programs; incorporate timers and counters utilizing programmable logic controllers; and execute and evaluate programs. (3 Lec., 3 Lab.)
Course Number: ELPT 2437 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Description: Planning and estimating for residential, commercial, and industrial wiring systems. Includes a variety of electrical techniques. (3 Lec., 2 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Title: Electrical Planning and Estimating
This is a WECM Course Number.Course Description: Planning and estimating for residential, commercial, and industrial wiring systems. Includes a variety of electrical techniques. (3 Lec., 2 Lab.)
Course Number: ELPT 2443 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Description: Electrical design of commercial and/or industrial projects including building layout, types of equipment, placement, sizing of electrical equipment, and all electrical calculations according to the requirements of the National Electrical Code (NEC). (3 Lec., 2 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Title: Electrical Systems Design
This is a WECM Course Number.Course Description: Electrical design of commercial and/or industrial projects including building layout, types of equipment, placement, sizing of electrical equipment, and all electrical calculations according to the requirements of the National Electrical Code (NEC). (3 Lec., 2 Lab.)
Course Number: ENTC 1191 (1 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (1 Lec.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Special Topics in Engineering Technology/Technician, General
This is a WECM Course Number.Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (1 Lec.)
Course Number: ENTC 1280 (2 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 10 Ext.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Course Title: Cooperative Education - Engineering Technology, General
This is a WECM Course Number.Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 10 Ext.)
Course Number: ENTC 1323 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Description: Introduces the relationship between externally applied forces and internally induced stresses and the resulting deformations in structural members. (2 Lec., 2 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): NLC
Course Title: Strength of Materials
This is a WECM Course Number.Course Description: Introduces the relationship between externally applied forces and internally induced stresses and the resulting deformations in structural members. (2 Lec., 2 Lab.)
Course Number: ENTC 1380 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 20 Ext.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Cooperative Education - Engineering Technology, General
This is a WECM Course Number.Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 20 Ext.)
Course Number: ENTC 1391 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course is cross-listed as ENTC 1491. The student may register for either ENTC 1391 or ENTC 1491 but may receive credit for only one of the two. This course may be repeated if topics and learning outcomes vary. (2 Lec., 2 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Special Topics In Engineering Technology, General
This is a WECM Course Number.Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course is cross-listed as ENTC 1491. The student may register for either ENTC 1391 or ENTC 1491 but may receive credit for only one of the two. This course may be repeated if topics and learning outcomes vary. (2 Lec., 2 Lab.)
Course Number: ENTC 1491 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course is cross-listed as ENTC 1391. The student may register for either ENTC 1391 or ENTC 1491 but may receive credit for only one of the two. This course may be repeated if topics and learning outcomes vary. (2 Lec., 4 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Special Topics In Engineering Technology General
This is a WECM Course Number.Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course is cross-listed as ENTC 1391. The student may register for either ENTC 1391 or ENTC 1491 but may receive credit for only one of the two. This course may be repeated if topics and learning outcomes vary. (2 Lec., 4 Lab.)
Course Number: ENTC 2380 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 20 Ext.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Cooperative Education - Engineering Technology, General
This is a WECM Course Number.Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 20 Ext.)
Course Number: HYDR 1345 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Description: Discussion of the fundamentals of hydraulics and pneumatics, components of each system, and the operations, maintenance, and analysis of each system. This course is cross-listed as HYDR 1445. The student may register for either HYDR 1345 or HYDR 1445 but may receive credit for only one of the two. (2 Lec., 4 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Hydraulics and Pneumatics
This is a WECM Course Number.Course Description: Discussion of the fundamentals of hydraulics and pneumatics, components of each system, and the operations, maintenance, and analysis of each system. This course is cross-listed as HYDR 1445. The student may register for either HYDR 1345 or HYDR 1445 but may receive credit for only one of the two. (2 Lec., 4 Lab.)
Course Number: HYDR 1445 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Course Description: Discussion of the fundamentals of hydraulics and pneumatics, components of each system, and the operations, maintenance, and analysis of each system. This course is cross-listed as HYDR 1345. The student may register for either HYDR 1345 or HYDR 1445 but may receive credit for only one of the two. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Course Title: Hydraulics and Pneumatics
This is a WECM Course Number.Course Description: Discussion of the fundamentals of hydraulics and pneumatics, components of each system, and the operations, maintenance, and analysis of each system. This course is cross-listed as HYDR 1345. The student may register for either HYDR 1345 or HYDR 1445 but may receive credit for only one of the two. (3 Lec., 3 Lab.)
Course Number: INMT 1311 (3 Credit Hours)
Listed by Campus(es): CVC, NLC
Course Description: A study of the principles and application of computer integrated manufacturing including integration of material handling, manufacturing, and computer hardware and programming. (3 Lec.)
Listed by Campus(es): CVC, NLC
Course Title: Computer Integrated Manufacturing
This is a WECM Course Number.Course Description: A study of the principles and application of computer integrated manufacturing including integration of material handling, manufacturing, and computer hardware and programming. (3 Lec.)
Course Number: INMT 1319 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Description: Exploration of a variety of methods used in manufacturing. Theory and application of processes including but not limited to metal forming, welding, machining, heat treating, plating, assembly procedures, and process control considerations, casting and injection molding. (2 Lec., 4 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Manufacturing Processes
This is a WECM Course Number.Course Description: Exploration of a variety of methods used in manufacturing. Theory and application of processes including but not limited to metal forming, welding, machining, heat treating, plating, assembly procedures, and process control considerations, casting and injection molding. (2 Lec., 4 Lab.)
Course Number: INMT 1343 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Description: Computer-assisted applications in integrating engineering graphics and manufacturing. Emphasis on the conversion of a working drawing using computer aided design/computer aided manufacturing (CAD/CAM) software and related input and output devices to translate into machine code. (2 Lec., 4 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Title: Computer Aided Design/Computer Aided Manufacturing (CAD/CAM)
This is a WECM Course Number.Course Description: Computer-assisted applications in integrating engineering graphics and manufacturing. Emphasis on the conversion of a working drawing using computer aided design/computer aided manufacturing (CAD/CAM) software and related input and output devices to translate into machine code. (2 Lec., 4 Lab.)
Course Number: INMT 1417 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Prerequisite Recommended: CETT 1405.
Course Description: A study of the applications of industrial automation systems including identification of system requirements, equipment integration, motors, controllers, and sensors. Coverage of set-up, maintenance, and testing of the automated system. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Course Title: Industrial Automation
This is a WECM Course Number.Prerequisite Recommended: CETT 1405.
Course Description: A study of the applications of industrial automation systems including identification of system requirements, equipment integration, motors, controllers, and sensors. Coverage of set-up, maintenance, and testing of the automated system. (3 Lec., 3 Lab.)
Course Number: INMT 2345 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Description: An advanced study of the techniques used in troubleshooting various types of industrial equipment to include mechanical, electrical, hydraulic, and pneumatic systems and their control devices. Emphasis will be placed on the use of schematics and diagrams in conjunction with proper troubleshooting procedures. (2 Lec., 4 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Industrial Troubleshooting
This is a WECM Course Number.Course Description: An advanced study of the techniques used in troubleshooting various types of industrial equipment to include mechanical, electrical, hydraulic, and pneumatic systems and their control devices. Emphasis will be placed on the use of schematics and diagrams in conjunction with proper troubleshooting procedures. (2 Lec., 4 Lab.)
Course Number: INMT 2381 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 20 Ext.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Cooperative Education-Manufacturing Technology/Technician
This is a WECM Course Number.Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 20 Ext.)
Course Number: INTC 1307 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Prerequisite Recommended: Credit or concurrent enrollment in CETT 1405.
Course Description: Theory and application of instrumentation test equipment. Emphasizes accuracy, limitations of instruments, and calibration techniques. (2 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Course Title: Instrumentation Test Equipment
This is a WECM Course Number.Prerequisite Recommended: Credit or concurrent enrollment in CETT 1405.
Course Description: Theory and application of instrumentation test equipment. Emphasizes accuracy, limitations of instruments, and calibration techniques. (2 Lec., 3 Lab.)
Course Number: INTC 1343 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Description: Automatic process control including measuring devices, analog and digital instrumentation, signal transmitters, recorders, alarms, controllers, control valves, and process and instrument diagrams. Includes connection and troubleshooting of loops. (2 Lec., 4 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Application of Industrial Automatic Controls
This is a WECM Course Number.Course Description: Automatic process control including measuring devices, analog and digital instrumentation, signal transmitters, recorders, alarms, controllers, control valves, and process and instrument diagrams. Includes connection and troubleshooting of loops. (2 Lec., 4 Lab.)
Course Number: INTC 1457 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Course Description: A study of electric motors and motor control devices common to a modern industrial environment. A presentation of motor characteristics with emphasis on starting, speed control, and stopping systems. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Course Title: AC/DC Motor Control
This is a WECM Course Number.Course Description: A study of electric motors and motor control devices common to a modern industrial environment. A presentation of motor characteristics with emphasis on starting, speed control, and stopping systems. (3 Lec., 3 Lab.)
Course Number: MCHN 1200 (2 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Course Description: Fundamental machine shop safety, math, and measurement. (1 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC, RLC
Course Title: Beginning Machine Shop
This is a WECM Course Number.Course Description: Fundamental machine shop safety, math, and measurement. (1 Lec., 3 Lab.)
Course Number: MCHN 1300 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Description: Fundamental machine shop safety, math and measurement. (2 Lec., 2 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Beginning Machine Shop
This is a WECM Course Number.Course Description: Fundamental machine shop safety, math and measurement. (2 Lec., 2 Lab.)
Course Number: MCHN 1319 (3 Credit Hours)
Listed by Campus(es): CVC, NLC
Course Description: A basic study of various materials used in the manufacturing industry and the chemical, physical, and mechanical properties of various materials. Emphasis on manufacturing processes, including casting, forming and machining. (2 Lec., 4 Lab.)
Listed by Campus(es): CVC, NLC
Course Title: Manufacturing Materials and Processes
This is a WECM Course Number.Course Description: A basic study of various materials used in the manufacturing industry and the chemical, physical, and mechanical properties of various materials. Emphasis on manufacturing processes, including casting, forming and machining. (2 Lec., 4 Lab.)
Course Number: MCHN 1320 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Description: An introduction to the modern science of dimensional metrology. Emphasis on the identification, selection, and application of various types of precision instruments associated with the machining trade. Practice of basic layout and piece part measurements while using standard measuring tools. (2 Lec., 4 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Precision Tools and Measurement
This is a WECM Course Number.Course Description: An introduction to the modern science of dimensional metrology. Emphasis on the identification, selection, and application of various types of precision instruments associated with the machining trade. Practice of basic layout and piece part measurements while using standard measuring tools. (2 Lec., 4 Lab.)
Course Number: MCHN 1326 (3 Credit Hours)
Listed by Campus(es): CVC, MVC, RLC
Prerequisite Recommended: DFTG 1309.
Course Description: A study of Computer-Aided Manufacturing (CAM) software which is used to develop applications for manufacturing. Emphasis on tool geometry, tool selection and the tool library. (1 Lec., 6 Lab.)
Listed by Campus(es): CVC, MVC, RLC
Course Title: Introduction to Computer-Aided Manufacturing (CAM)
This is a WECM Course Number.Prerequisite Recommended: DFTG 1309.
Course Description: A study of Computer-Aided Manufacturing (CAM) software which is used to develop applications for manufacturing. Emphasis on tool geometry, tool selection and the tool library. (1 Lec., 6 Lab.)
Course Number: MCHN 1338 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Prerequisite Recommended: INMT 1319, MCHN 1320.
Course Description: A course that introduces the student to machining fundamentals. The student will use basic machine tools including the lathe, milling machine, drill press, power saw, and bench grinder. Machine terminology, theory, math, part layout, and bench work using common measuring tools is included. Emphasis is placed on shop safety, housekeeping, and preventative maintenance. This course is cross-listed as MCHN 1438. The student may register for either MCHN 1338 or MCHN 1438 but may receive credit for only one of the two. (1 Lec., 6 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Basic Machine Shop I
This is a WECM Course Number.Prerequisite Recommended: INMT 1319, MCHN 1320.
Course Description: A course that introduces the student to machining fundamentals. The student will use basic machine tools including the lathe, milling machine, drill press, power saw, and bench grinder. Machine terminology, theory, math, part layout, and bench work using common measuring tools is included. Emphasis is placed on shop safety, housekeeping, and preventative maintenance. This course is cross-listed as MCHN 1438. The student may register for either MCHN 1338 or MCHN 1438 but may receive credit for only one of the two. (1 Lec., 6 Lab.)
Course Number: MCHN 1343 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Description: Designed to prepare the student with technical, applied mathematics that will be necessary in future machine shop-related courses. (2 Lec., 4 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Title: Machine Shop Mathematics
This is a WECM Course Number.Course Description: Designed to prepare the student with technical, applied mathematics that will be necessary in future machine shop-related courses. (2 Lec., 4 Lab.)
Course Number: MCHN 1352 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Prerequisite Required: MCHN 1338.
Course Description: Operation of drilling machines, milling machines, lathes, and power saws. Select and use appropriate precision measuring tools. (1 Lec., 6 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Intermediate Machining I
This is a WECM Course Number.Prerequisite Required: MCHN 1338.
Course Description: Operation of drilling machines, milling machines, lathes, and power saws. Select and use appropriate precision measuring tools. (1 Lec., 6 Lab.)
Course Number: MCHN 1393 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Prerequisite Recommended: MCHN 1326, MCHN 1352, MCHN 2331, MCHN 2435, MCHN 2447.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (1 Lec., 5 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Special Topics in Tool and Die Maker/Technologist
This is a WECM Course Number.Prerequisite Recommended: MCHN 1326, MCHN 1352, MCHN 2331, MCHN 2435, MCHN 2447.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (1 Lec., 5 Lab.)
Course Number: MCHN 1438 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC
Course Description: A course that introduces the student to machining fundamentals. The student begins by using basic machine tools including the lathe, milling machine, drill press, power saw, and bench grinder. Machine terminology, theory, math, part layout, and bench work using common measuring tools is included. Emphasis is placed on shop safety, housekeeping, and preventative maintenance. This course is cross-listed as MCHN 1338. The student may register for either MCHN 1338 or MCHN 1438 but may receive credit for only one of the two. (2 Lec., 6 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC
Course Title: Basic Machine Shop I
This is a WECM Course Number.Course Description: A course that introduces the student to machining fundamentals. The student begins by using basic machine tools including the lathe, milling machine, drill press, power saw, and bench grinder. Machine terminology, theory, math, part layout, and bench work using common measuring tools is included. Emphasis is placed on shop safety, housekeeping, and preventative maintenance. This course is cross-listed as MCHN 1338. The student may register for either MCHN 1338 or MCHN 1438 but may receive credit for only one of the two. (2 Lec., 6 Lab.)
Course Number: MCHN 1454 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Description: Development of job process plan to include operation of lathes, milling machines, drill press machines, and power saws. Set-up, layout, and tool maintenance is included. Emphasis on shop safety and preventative maintenance. (2 Lec., 6 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Title: Intermediate Machining II
This is a WECM Course Number.Course Description: Development of job process plan to include operation of lathes, milling machines, drill press machines, and power saws. Set-up, layout, and tool maintenance is included. Emphasis on shop safety and preventative maintenance. (2 Lec., 6 Lab.)
Course Number: MCHN 2331 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Description: CNC operations with an emphasis on turning centers. This course is cross-listed as MCHN 2431. The student may register for either MCHN 2331 or MCHN 2431 but may receive credit for only one of the two. (1 Lec., 6 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Operation of CNC Turning Centers
This is a WECM Course Number.Course Description: CNC operations with an emphasis on turning centers. This course is cross-listed as MCHN 2431. The student may register for either MCHN 2331 or MCHN 2431 but may receive credit for only one of the two. (1 Lec., 6 Lab.)
Course Number: MCHN 2335 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Description: Advanced CNC operations with an emphasis on programming and operations of machining and turning centers. [This course is cross-listed as MCHN 2435. The student may register for either MCHN 2335 or MCHN 2435 but may receive credit for only one of the two. (1 Lec., 6 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Advanced CNC Machining
This is a WECM Course Number.Course Description: Advanced CNC operations with an emphasis on programming and operations of machining and turning centers. [This course is cross-listed as MCHN 2435. The student may register for either MCHN 2335 or MCHN 2435 but may receive credit for only one of the two. (1 Lec., 6 Lab.)
Course Number: MCHN 2338 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Prerequisite Recommended: INMT 1343.
Course Description: A study of advanced techniques in Computer-Aided Manufacturing (CAM). (1 Lec., 6 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Title: Advanced Computer-Aided Manufacturing (CAM)
This is a WECM Course Number.Prerequisite Recommended: INMT 1343.
Course Description: A study of advanced techniques in Computer-Aided Manufacturing (CAM). (1 Lec., 6 Lab.)
Course Number: MCHN 2431 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC
(Single-Course Delivery for EFC. Single-Course Delivery courses do not qualify for Financial Aid at this campus.)
Course Description: CNC operations with an emphasis on turning centers. This course is cross-listed as MCHN 2331. The student may register for either MCHN 2331 or MCHN 2431 but may receive credit for only one of the two. (2 Lec., 4 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC
(Single-Course Delivery for EFC. Single-Course Delivery courses do not qualify for Financial Aid at this campus.)
Course Title: Operation of CNC Turning Centers
This is a WECM Course Number.Course Description: CNC operations with an emphasis on turning centers. This course is cross-listed as MCHN 2331. The student may register for either MCHN 2331 or MCHN 2431 but may receive credit for only one of the two. (2 Lec., 4 Lab.)
Course Number: MCHN 2434 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC
(Single-Course Delivery for EFC. Single-Course Delivery courses do not qualify for Financial Aid at this campus.)
Course Description: A study of CNC operations with an emphasis on vertical machining centers. (2 Lec., 4 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC
(Single-Course Delivery for EFC. Single-Course Delivery courses do not qualify for Financial Aid at this campus.)
Course Title: Operation of CNC Machining Centers
This is a WECM Course Number.Course Description: A study of CNC operations with an emphasis on vertical machining centers. (2 Lec., 4 Lab.)
Course Number: MCHN 2435 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Description: Advanced CNC operation with an emphasis on programming and operations of machining and turning centers. This course is cross-listed as MCHN 2435. The student may register for either MCHN 2335 or MCHN 2435 but may receive credit for only one of the two. (2 Lec., 6 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Advanced CNC Machining
This is a WECM Course Number.Course Description: Advanced CNC operation with an emphasis on programming and operations of machining and turning centers. This course is cross-listed as MCHN 2435. The student may register for either MCHN 2335 or MCHN 2435 but may receive credit for only one of the two. (2 Lec., 6 Lab.)
Course Number: MCHN 2441 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Description: A study of advanced lathe and milling operations. Emphasis on advanced cutting operations of the lathe and milling machines, including the use of special tooling, bench assembly, and materials identification. (2 Lec., 4 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Title: Advanced Machining I
This is a WECM Course Number.Course Description: A study of advanced lathe and milling operations. Emphasis on advanced cutting operations of the lathe and milling machines, including the use of special tooling, bench assembly, and materials identification. (2 Lec., 4 Lab.)
Course Number: MCHN 2447 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Prerequisite Required: MCHN 1352, MCHN 1326, MCHN 2331.
Course Description: An advanced course in the designing and building of special tools, such as jigs, fixtures, punch press dies, and molds. Machining and assembling of a production tool using conventional machine shop equipment. Application of production tool theory, care, and maintenance. (2 Lec., 6 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Specialized Tools and Fixtures
This is a WECM Course Number.Prerequisite Required: MCHN 1352, MCHN 1326, MCHN 2331.
Course Description: An advanced course in the designing and building of special tools, such as jigs, fixtures, punch press dies, and molds. Machining and assembling of a production tool using conventional machine shop equipment. Application of production tool theory, care, and maintenance. (2 Lec., 6 Lab.)
Course Number: MFGT 1302 (3 Credit Hours) Reinstated course added October 20, 2020
Listed by Campus(es): CVC, NLC
Course Description: Overview of automated manufacturing principles; including manufacturing process, control systems, and measurement theory. (2 Lec., 4 Lab.)
Listed by Campus(es): CVC, NLC
Course Title: Introduction to Automated Manufacturing
This is a WECM Course Number.Course Description: Overview of automated manufacturing principles; including manufacturing process, control systems, and measurement theory. (2 Lec., 4 Lab.)
Course Number: MFGT 1404 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Description: This course is an introduction to electrical and electronic principles utilized in automated manufacturing processes. Students will describe microcontroller applications in manufacturing; identify electrical/electronic components, circuits, and schematics/diagrams used in manufacturing; describe operations and applications of sensors and actuators used in manufacturing; apply interfacing techniques used in manufacturing; and apply programming techniques used with microcontrollers. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Title: Automated Manufacturing
This is a WECM Course Number.Course Description: This course is an introduction to electrical and electronic principles utilized in automated manufacturing processes. Students will describe microcontroller applications in manufacturing; identify electrical/electronic components, circuits, and schematics/diagrams used in manufacturing; describe operations and applications of sensors and actuators used in manufacturing; apply interfacing techniques used in manufacturing; and apply programming techniques used with microcontrollers. (3 Lec., 3 Lab.)
Course Number: MFGT 1406 (4 Credit Hours)
Listed by Campus(es): CVC, EFC, MVC
Course Description: This course is an overview of mechanical principles used in automated manufacturing. Topics covered include common measurement methods, engineering drawings, and mechanical methods used in automated manufacturing. Students will apply measurement techniques used in manufacturing; interpret engineering drawings used in product data management; identify mechanical systems and equipment used in advanced manufacturing; identify safety issues in manufacturing; describe hand tools and maintenance issues of manufacturing; demonstrate material assembly; and describe operations and applications of pneumatic, electro-pneumatic, hydraulic, and electro-hydraulic controls. (3 Lec., 3 Lab.)
Listed by Campus(es): CVC, EFC, MVC
Course Title: Mechanical Principles in Automated Manufacturing
This is a WECM Course Number.Course Description: This course is an overview of mechanical principles used in automated manufacturing. Topics covered include common measurement methods, engineering drawings, and mechanical methods used in automated manufacturing. Students will apply measurement techniques used in manufacturing; interpret engineering drawings used in product data management; identify mechanical systems and equipment used in advanced manufacturing; identify safety issues in manufacturing; describe hand tools and maintenance issues of manufacturing; demonstrate material assembly; and describe operations and applications of pneumatic, electro-pneumatic, hydraulic, and electro-hydraulic controls. (3 Lec., 3 Lab.)
Course Number: MFGT 2459 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Description: Advanced topics in automated manufacturing. Includes electrical and electronic principles, electro-pneumatic and electro-hydraulic controls, logic control methods, and basic programming techniques. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): EFC, MVC
Course Title: Industrial Automation II
This is a WECM Course Number.Course Description: Advanced topics in automated manufacturing. Includes electrical and electronic principles, electro-pneumatic and electro-hydraulic controls, logic control methods, and basic programming techniques. (3 Lec., 3 Lab.)
Course Number: QCTC 1243 (2 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC
Prerequisite Recommended: Credit or concurrent enrollment in MATH 1414 or the equivalent.
Course Description: Principles and applications designed to introduce quality assurance. (2 Lec., 1 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC
Course Title: Quality Assurance
This is a WECM Course Number.Prerequisite Recommended: Credit or concurrent enrollment in MATH 1414 or the equivalent.
Course Description: Principles and applications designed to introduce quality assurance. (2 Lec., 1 Lab.)
Course Number: QCTC 1301 (3 Credit Hours)
Listed by Campus(es): CVC, NLC
Course Description: The study of integrating work processes using team participation through employee empowerment and teamwork emphasizing the philosophy of customer service and satisfaction. (3 Lec., 1 Lab.)
Listed by Campus(es): CVC, NLC
Course Title: Total Quality Management
This is a WECM Course Number.Course Description: The study of integrating work processes using team participation through employee empowerment and teamwork emphasizing the philosophy of customer service and satisfaction. (3 Lec., 1 Lab.)
Course Number: RBTC 2445 (4 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC
Course Description: A course that provides the student with laboratory experience in the installation, set-up, and testing of robotic cells. Topics include maintenance. (3 Lec., 3 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): MVC
Course Title: Robot Application, Set-Up And Testing
This is a WECM Course Number.Course Description: A course that provides the student with laboratory experience in the installation, set-up, and testing of robotic cells. Topics include maintenance. (3 Lec., 3 Lab.)
Course Number: SMFT 1343 (3 Credit Hours)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Description: A study of the processes, materials, and equipment used in the manufacturing of semiconductors, including an overview of the semiconductor industry, related terminology, and standard safety practice. (2 Lec., 2 Lab.)
This course is not currently offered by Cedar Valley Campus.
Listed by Campus(es): RLC
Course Title: Semiconductor Manufacturing Technology
This is a WECM Course Number.Course Description: A study of the processes, materials, and equipment used in the manufacturing of semiconductors, including an overview of the semiconductor industry, related terminology, and standard safety practice. (2 Lec., 2 Lab.)
ACGM (Lower-Division Academic Course Guide Manual) Courses
WECM (Workforce Education Course Manual) Courses
Designated by the Texas Higher Education Coordinating Board for general academic transfer among community, state, and technical colleges in Texas; and state public four-year colleges and universities as freshman and sophomore general education courses.
WECM (Workforce Education Course Manual) Courses
Designated by the Texas Higher Education Coordinating Board as workforce education (technical) courses offered for credit and CEUs (Continuing Education Units). While these courses are designed to transfer among state community colleges, they are not designed to automatically transfer to public four-year colleges and universities.