DCCCD
|
CETT 1204 (2 Credit Hours)
Offered at EFC High-Reliability Soldering This is a WECM Course Number. Course Description: Instruction in this course will teach high reliability soldering, desoldering, circuitry repair, plated-thru-hole repairs, conformal coating removal, industry standards, electrostatic discharge (ESD) control, surface mount device (SMD) installation, removal and replacement using hand held systems or reflow workstations. Students will solder highly reliable connections; solder to industry standards; desolder connections; install surface mount devices; remove surface mount devices; remove conformal coatings; repair and/or replace traces, pads, and eyelets. (1 Lec., 2 Lab.) |
|
CETT 1303 (3 Credit Hours)
Offered at RLC DC Circuits This is a WECM Course Number. Course Description: A study of the fundamentals of direct current including Ohm's law, Kirchhoff's laws and circuit analysis techniques. (2 Lec., 2 Lab.) |
|
CETT 1305 (3 Credit Hours)
Offered at RLC AC Circuits This is a WECM Course Number. Course Description: A study of the fundamentals of alternating current including series and parallel AC circuits, phasors, capacitive and inductive networks, transformers, and resonance. (2 Lec., 2 Lab.) |
|
CETT 1331 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD. Technical Programming This is a WECM Course Number. Prerequisite Recommended: Credit or concurrent enrollment in MATH 1414 or the equivalent. Course Description: Introduction to a high level programming language such as BASIC, PASCAL, or "C". Topics include structured programming and problem solving as they apply to technical applications. This course is cross-listed as CETT 1431. The student may register for either CETT 1331 or CETT 1431 but may receive credit for only one of the two. (2 Lec., 4 Lab.) |
|
CETT 1357 (3 Credit Hours)
Offered at RLC Linear Integrated Circuits This is a WECM Course Number. Course Description: A study of the characteristics, operations, and testing of linear integrated circuits. Applications include instrumentation and active filtering. (2 Lec., 4 Lab.) |
|
CETT 1402 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD. Electricity Principles This is a WECM Course Number. Course Description: Principles of electricity including proper use of test equipment, A/C and D/C circuits, and component theory and operation. Students will identify basic principles of electricity (A/C and D/C), voltage, current, and circuitry; apply Ohm's law to electrical calculations; use test equipment to measure continuity, voltage, and current values; and use electrical safety practices. (3 Lec., 3 Lab.) |
|
CETT 1403 (4 Credit Hours)
Offered at EFC, MVC, RLC DC Circuits This is a WECM Course Number. Course Description: A study of the fundamentals of direct current including Ohm's law, Kirchhoff's laws and circuit analysis techniques. Emphasis on circuit analysis of resistive networks and DC measurements. (3 Lec., 3 Lab.) |
|
CETT 1405 (4 Credit Hours)
Offered at EFC, MVC, RLC AC Circuits This is a WECM Course Number. Prerequisite Recommended: CETT 1403. Course Description: A study of the fundamentals of alternating current including series and parallel AC circuits, phasors, capacitive and inductive networks, transformers, and resonance. This course is cross-listed as CETT 1305. The student may register for either CETT 1405 or CETT 1305 but may receive credit for only one of the two (3 Lec., 3 Lab.) |
|
CETT 1407 (4 Credit Hours)
Offered at EFC Fundamentals of Electronics This is a WECM Course Number. Course Description: Applies concepts of electricity, electronics, and digital fundamentals; supports programs requiring a general knowledge of electronics. Students will build and test circuits using analog and digital components; visually identify components and component values; build and test series and parallel resistive circuits; check resistors, diodes, and transistors using a multimeter. (3 Lec., 3 Lab.) |
|
CETT 1425 (4 Credit Hours)
Offered at EFC, MVC, RLC Digital Fundamentals This is a WECM Course Number. Course Description: An entry-level course in digital electronics to include numbering systems, logic gates, Boolean algebra, and combinational logic This course is cross-listed as CETT 1325. The student may register for either CETT 1425 or CETT 1325 but may receive credit for only one of the two. (3 Lec., 3 Lab.) |
|
CETT 1429 (4 Credit Hours)
Offered at EFC, MVC, RLC Solid State Devices This is a WECM Course Number. Prerequisite Recommended: CETT 1403 and credit or concurrent enrollment in CETT 1405. Course Description: A study of diodes, transistor characteristics and other semiconductor devices, including analysis of static and dynamic characteristics, biasing techniques, and thermal considerations. This course is cross-listed as CETT 1329. The student may register for either CETT 1429 or CETT 1329 but may receive credit for only one of the two. (3 Lec., 3 Lab./3 Lec., 2 Lab.) |
|
CETT 1431 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD. Programming for Discrete Electronic Devices This is a WECM Course Number. Course Description: Introduction to a high level programming language. Includes structured programming and problem solving applicable to discrete electronic devices. This course is cross-listed as CETT 1331. The student may register for either CETT 1331 or CETT 1431 but may receive credit for only one of the two. (3 Lec., 3 Lab.) |
|
CETT 1441 (4 Credit Hours)
Offered at EFC, MVC Solid State Circuits This is a WECM Course Number. Prerequisite Recommended: CETT 1429. Course Description: A study of various semiconductor devices incorporated in circuits and their applications. Emphasis on circuit construction, measurements, and analysis. Topics will include JFETs, MOSFETs, oscillators, thyristors, power supply systems, voltage regulators, multistage amplifiers and power amplifiers. (3 Lec., 3 Lab.) |
|
CETT 1445 (4 Credit Hours)
Offered at EFC, MVC Microprocessor This is a WECM Course Number. Prerequisite Recommended: CETT 1425. Course Description: An introductory course in microprocessor software and hardware; its architecture, timing sequence, operation, and programming; and discussion of appropriate software diagnostic language and tools. (3 Lec., 3 Lab.) |
|
CETT 1449 (4 Credit Hours)
Offered at EFC, MVC Digital Systems This is a WECM Course Number. Prerequisite Recommended: CETT 1429. Course Description: Digital Systems is a course in electronics covering digital systems. Emphasis on application and troubleshooting digital systems using counters, registers, code converters, multiplexers, analog-to-digital circuits, digital-to-analog circuits, and large-scale integrated circuits. The student will evaluate the operation of digital systems while operating in correct and fault mode using various test instruments; describe the difference between a digital system and an analog system; and draw a simple block diagram of a digital computer system. (3 Lec., 3 Lab.) |
|
CETT 1457 (4 Credit Hours)
Offered at EFC, MVC, RLC Linear Integrated Circuits This is a WECM Course Number. Prerequisite Recommended: CETT 1429. Course Description: In depth coverage of the characteristics, operations, stabilization, testing, and feedback techniques of linear integrated circuits. Application in computation, measurements, instrumentation, and active filtering. (3 Lec., 3 Lab.) |
|
CETT 1491 (4 Credit Hours)
Offered at EFC Special Topics in Computer Engineering Technology/Technician This is a WECM Course Number. Course Description: This course will teach individuals in the renewable energy field how to read, interpret and correlate schematic drawings, in the fields of electronics, construction trades, mechanical, electrical, pneumatics, and hydraulics. These students will be able to read a drawing, go to the physical device and produce the drawing, or begin at the physical device and reduce it to a drawing. The course is also intended to make a person proficient in the physical construction of a drawing. This course may be repeated if topics and learning outcomes vary. (3 Lec., 3 Lab.) |
|
CETT 2337 (3 Credit Hours)
Offered at RLC Microcomputer Control This is a WECM Course Number. Prerequisite Recommended: CETT 1425. Course Description: A study of microprocessors and microcomputers with an emphasis on embedded controllers for industrial and commercial applications. Topics include RAM, ROM and input/output (I/O) interfacing. Introduction to programming. (2 Lec., 2 Lab.) |
|
CETT 2433 (4 Credit Hours)
Offered at EFC, MVC Digital Computer Circuits This is a WECM Course Number. Prerequisite Recommended: CETT 1429. Course Description: Digital Computer circuits is a study of the three major component systems of a digital computer including arithmetic logic operations, RAM and ROM memory systems, and control systems. The student will explain the operation of the three basic sections of any computer system. The student will construct and troubleshoot computer circuits including arithmetic logic units, memory systems, and control systems; describe the function of the BIOS (Basic Input Output System) in a computer system; and how a computer knows what to address when first cold booted. (3 Lec., 3 Lab.) |
|
CETT 2435 (4 Credit Hours)
Offered at EFC, MVC Advanced Microprocessors This is a WECM Course Number. Prerequisite Recommended: CETT 1445. Course Description: An advanced course utilizing the microprocessor in control systems and interfacing. Emphasis on microprocessor hardware and implementation of peripheral interfacing. (3 Lec., 3 Lab.) |
|
CETT 2449 (4 Credit Hours)
Offered at EFC Research and Project Design This is a WECM Course Number. Course Description: Principles of electrical/electronic design encompassing schematics wiring diagrams, materials lists, operating characteristics, completion schedules, and cost estimates. (2 Lec., 4 Lab.) |
|
CETT 2480 (4 Credit Hours)
Offered at EFC Cooperative Education-Computer Engineering Technology/ Technician This is a WECM Course Number. Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 26 Ext.) |
|
CETT 2481 (4 Credit Hours)
Offered at EFC Cooperative Education-Computer Engineering Technology/ Technician This is a WECM Course Number. Course Description: Career-related activities encountered in the student’s area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 26 Ext.) |
|
CPMT 1307 (3 Credit Hours)
Offered at MVC Electronic and Computer Skills This is a WECM Course Number. Course Description: A study of the information for the assembly of a microcomputer system. Emphasis on the evolution of microprocessors and microprocessor bus structures. (3 Lec.) |
|
CPMT 1403 (4 Credit Hours)
Offered at EFC, MVC Introduction to Computer Technology This is a WECM Course Number. Course Description: A fundamental computer course that provides explanation of the procedures to utilize hardware and software. Emphasis on terminology, acronyms, and hands-on activities. (3 Lec., 3 Lab.) |
|
CPMT 1404 (4 Credit Hours)
Offered at MVC Microcomputer System Software This is a WECM Course Number. Course Description: In this course the students will develop skills in the installation, configuration, maintenance and troubleshooting of system software in microcomputers. Topics covered may include operating systems, utility software and other software affecting the basic operation of a microcomputer system. (3 Lec., 3 Lab.) |
|
CPMT 1411 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD. Introduction to Computer Maintenance This is a WECM Course Number. Course Description: This course is an introduction to the installation, configuration, and maintenance of a microcomputer system. Students will study how to identify modules that make up a computer system and its operation; identify each type of computer bus structure; assemble/setup microcomputer systems and adapter/interface boards; and install/connect associated peripherals. (3 Lec., 3 Lab.) |
|
CPMT 1443 (4 Credit Hours)
Offered at MVC Microcomputer Architecture This is a WECM Course Number. Course Description: Computer characteristics and subsystem operations, timing, control circuits, and internal input/output controls. (3 Lec., 3 Lab.) |
|
CPMT 1445 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD. Computer Systems Maintenance This is a WECM Course Number. Course Description: This course will cover functions of the components within a computer system. In this course the students will develop skills in the use of test equipment and maintenance aids. Students will study how to describe the functions of components in a computer system; use computer related test equipment; and demonstrate the effective use of maintenance tools. (3 Lec., 3 Lab.) |
|
CPMT 1447 (4 Credit Hours)
Offered at MVC Computer System Peripherals This is a WECM Course Number. Prerequisite Recommended: CETT 1403. Course Description: This course is an in-depth study of principles and practices involved in computer system troubleshooting techniques, programs, and the use of specialized test equipment. The student will develop hardware and software troubleshooting techniques and perform procedures used in troubleshooting. (3 Lec., 3 Lab.) |
|
CPMT 1449 (4 Credit Hours)
Offered at MVC Computer Networking Technology This is a WECM Course Number. Prerequisite Recommended: CETT 1403. Course Description: This is a beginning course in computer networks with focus on networking fundamentals, terminology, hardware, software, and network architecture. A study of local/wide area networking concepts and networking installations and operations. (3 Lec., 3 Lab.) |
|
CPMT 1451 (4 Credit Hours)
Offered at BHC, ECC, MVC, NLC, RLC IT Essentials: PC Hardware and Software This is a WECM Course Number. Course Description: An introduction to the computer hardware and software skills needed to help meet the growing demand for entry-level information and communication technology (ICT) professionals. The curriculum covers the fundamentals of PC technology, networking, and security, and also provides an introduction to advanced concepts. Hands-on labs and Virtual Laptop and Virtual Desktop learning tools help students develop critical thinking and complex problem-solving skills. Cisco Packet Tracer simulation-based learning activities promote the exploration of network and networking security concepts and allow students to experiment with network behavior. (3 Lec., 4 Lab.) |
|
CPMT 2302 (3 Credit Hours)
Offered at ECC, MVC Home Technology Integration This is a WECM Course Number. Prerequisite Recommended: ITSC 1405 and ITSC 1425 or CPMT 1305 or instructor approval. Course Description: Integration and maintenance of various home technology subsystems. Includes home automation, security and surveillance, home networks, video and audio networks, and structured wiring. This course is cross-listed as CPMT 2402. The student may register for either CPMT 2302 or CPMT 2402 but may receive credit for only one of the two. (2 Lec., 4 Lab.) |
|
CPMT 2402 (4 Credit Hours)
Offered at MVC Home Technology Integration This is a WECM Course Number. Prerequisite Recommended: ITSC 1405 and ITSC 1425 or CPMT 1405 of instructor approval. Course Description: Integration and maintenance of various home technology subsystems. Includes home automation, security and surveillance, home networks, video and audio networks, and structured wiring. This course is cross-listed as CPMT 2302. The student may register for either CPMT 2302 or CPMT 2402 but may receive credit for only one of the two. (3 Lec., 4 Lab.) |
|
CPMT 2433 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD. Computer Integration This is a WECM Course Number. Course Description: Integration of hardware, software, and applications. Customization of computer systems for specific applications such as engineering, multimedia, or data acquisition. Integrate special applications in the areas of multimedia, data acquisition, or engineering; install and maintain various hardware and software components for specialized applications; and analyze and test system operations. This course is cross-listed as CPMT 2233. The student may register for either CPMT 2233 or CPMT 2433 but may receive credit for only one of the two. (3 Lec., 3 Lab.) |
|
CPMT 2445 (4 Credit Hours)
Offered at MVC Computer System Troubleshooting This is a WECM Course Number. Prerequisite Recommended: CETT 1429. Course Description: This course covers principles and practices involved in computer system troubleshooting techniques and repair procedures including advanced diagnostic test programs and the use of specialized test equipment. The student will develop hardware and software troubleshooting techniques and perform procedures used in troubleshooting. (3 Lec., 3 Lab.) |
|
EECT 1104 (1 Credit Hours)
Offered at EFC, MVC Electronic Soldering This is a WECM Course Number. Course Description: The theory of tools and equipment for electronic soldering techniques. The student will select and use appropriate soldering tools and equipment, demonstrate proper soldering techniques, and practice safety procedures. Emphasis will be primarily on terminal and printed circuit board through-hole soldering. This course is cross-listed as EECT 1204. The student may register for either EECT 1104 or EECT 1204 but may receive credit for only one of the two. (2 Lab.) |
|
EECT 1191 (1 Credit Hours)
Offered at EFC, MVC Special Topics In Electrical, Electronic And Communications Engineering Technology/Technician This is a WECM Course Number. Course Description: Topics in this course address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (1 Lec.) |
|
EECT 1204 (2 Credit Hours)
Offered at MVC Electronic Soldering This is a WECM Course Number. Course Description: The theory of tools and equipment for electronic soldering techniques. The student will select and use appropriate soldering tools and equipment, demonstrate proper soldering techniques, and practice safety procedures. Emphasis will be on surface-mount soldering techniques. This course is cross-listed as EECT 1104. The student may register for either EECT 1204 or EECT 1104 but may receive credit for only one of the two. (1 Lec., 2 Lab.) |
|
EECT 1291 (2 Credit Hours)
Offered at MVC Special Topics In Electrical, Electronic And Communications Engineering Technology/Technician This is a WECM Course Number. Course Description: Topics in this course address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (2 Lec., 1 Lab.) |
|
EECT 1300 (3 Credit Hours)
Offered at MVC Technical Customer Service This is a WECM Course Number. Course Description: General principles of customer service within a technical environment. Topics include internal/external customer relationships, time-management, best practices, and verbal and non-verbal communications skills. (3 Lec.) |
|
EECT 1307 (3 Credit Hours)
Offered at MVC Convergence Technologies This is a WECM Course Number. Course Description: A study of telecommunications convergence technologies including telephone, LAN, WAN, wireless, voice, video, and internet protocol. This course is cross-listed as EECT 1407. The student may register for either EECT 1307 or EECT 1407 but may receive credit for only one of the two. (2 Lec., 4 Lab.) |
|
EECT 1391 (3 Credit Hours)
Offered at EFC, MVC Special Topics In Electrical, Electronic And Communications Engineering Technology/Technician This is a WECM Course Number. Course Description: Topics in this course address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (2 Lec., 2 Lab.) |
|
EECT 1403 (4 Credit Hours)
Offered at MVC Introduction to Telecommunications This is a WECM Course Number. Course Description: An overview of the telecommunications industry. Topics include the history of the telecommunications industry, terminology, rules and regulations and industry standards and protocols. This course is cross-listed as EECT 1303. The student may register for either EECT 1403 or EECT 1303 but may receive credit for only one of the two. (3 Lec., 3 Lab.) |
|
EECT 1407 (4 Credit Hours)
Offered at ECC, MVC, NLC Convergence Technologies This is a WECM Course Number. Course Description: A study of telecommunications convergence technologies including telephone, LAN, WAN, wireless, voice, video, and internet protocol. This course is cross-listed as EECT 1307. The student may register for either EECT 1307 or EECT 1407 but may receive credit for only one of the two. (3 Lec., 4 Lab.) |
|
EECT 1408 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD. Structured Media Systems This is a WECM Course Number. Course Description: Design, integration, setup, testing, and maintenance of various residential and small business subsystems, including industry documentation. (3 Lec., 3 Lab.) |
|
EECT 1440 (4 Credit Hours)
Offered at MVC Telecommunications Transmission Media This is a WECM Course Number. Course Description: Fundamentals of telecommunications media, including installation, maintenance, and troubleshooting. Topics address media characteristics and connectorization. (3 Lec., 4 Lab.) |
|
EECT 1444 (4 Credit Hours)
Offered at MVC Telecommunications Broadband Systems This is a WECM Course Number. Prerequisite Recommended: EECT 1403. Course Description: A survey of telecommunications broadband transmissions systems including protocols, testing, applications and safety practices. (3 Lec., 3 Lab.) |
|
EECT 1491 (4 Credit Hours)
Offered at EFC, MVC Special Topics In Electrical, Electronic And Communications Engineering Technology/Technician This is a WECM Course Number. Course Description: Introduction to the use of structured wiring systems to provide access and versatility to configure wiring topologies in a business or home environment. Design, install, and test the various subsystems available to the technology for today''s high-tech business or home. Manage existing and emerging technologies in a business or home and establish a modular infrastructure for future innovations that will not only increase current value, but ensure its long-term viability. This course may be repeated if topics and learning outcomes vary. (3 Lec., 3 Lab.) |
|
EECT 2337 (3 Credit Hours)
Offered at MVC Wireless Telephony Systems This is a WECM Course Number. Prerequisite Recommended: EECT 1403 or EECT 1307 or EECT 1407. Course Description: Principles of wireless/cellular telephony systems to include call processing, hand-off, site analysis, antenna radiation patterns, commonly used test/maintenance equipment and access protocol. This course is cross-listed as EECT 2437. The student may register for either EECT 2337 or EECT 2437 but may receive credit for only one of the two. (2 Lec., 4 Lab.) |
|
EECT 2366 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD. Practicum (or Field Experience) - Electrical, Electronic and Communications Engineering Technology/Technician This is a WECM Course Number. Course Description: Practical, general workplace training supported by an individualized learning plan developed by the employer, college, and student. (21 Ext.) |
|
EECT 2380 (3 Credit Hours)
Offered at EFC, MVC Cooperative Education - Electrical, Electronic And Communications Engineering Technology/Technician This is a WECM Course Number. Course Description: Career related activities encountered in the student's area of specialization are offered through a cooperative agreement between the college, employer and student. Under supervision of the college and the employer, the student combines classroom learning with work experience. Directly related to a technical discipline, specific learning objectives guide the student through the paid work experience. (1 Lec., 20 Ext.) |
|
EECT 2381 (3 Credit Hours)
Offered at EFC, MVC Cooperative Education - Electrical, Electronic And Communications Engineering Technology/Technician This is a WECM Course Number. Course Description: Career related activities encountered in the student's area of specialization are offered through a cooperative agreement between the college, employer and student. Under supervision of the college and the employer, the student combines classroom learning with work experience. Directly related to a technical discipline, specific learning objectives guide the student through the paid work experience. (1 Lec., 20 Ext.) |
|
EECT 2388 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD. Internship - Electrical, Electronic and Communications Engineering Technology/Technician This is a WECM Course Number. Course Description: A work-based learning experience that enables the student to apply specialized occupational theory, skills and concepts. A learning plan is developed by the college and the employer. (18 Ext.) |
|
EECT 2430 (4 Credit Hours)
Offered at MVC Telecommunications Switching This is a WECM Course Number. Prerequisite Recommended: EECT 1403. Course Description: The operation of telecommunications switching equipment and related software. Topics include installation, testing, maintenance, and troubleshooting. (3 Lec., 3 Lab.) |
|
EECT 2432 (4 Credit Hours)
Offered at MVC Telecommunications Signaling This is a WECM Course Number. Prerequisite Recommended: EECT 1403. Course Description: The study of signaling schemes in telecommunications. Topics include circuits and systems necessary to implement signaling protocols, conversions and formats. Also included is the study of the history of signaling schemes. (3 Lec., 3 Lab.) |
|
EECT 2433 (4 Credit Hours)
Offered at MVC Telephone Systems This is a WECM Course Number. Course Description: A study of installation and maintenance systems including telephone set, public switched networks, local exchanges, networks, two and four wire systems, tip and ringing requirements, and digital transmission techniques. (3 Lec., 3 Lab.) |
|
EECT 2435 (4 Credit Hours)
Offered at MVC Telecommunications This is a WECM Course Number. Prerequisite Recommended: CETT 2439. Course Description: A study of modern telecommunications systems incorporating microwave, satellite, optical, and wire/cable-based communications systems. Instruction in installation, testing, and maintenance of communications systems components. (3 Lec., 3 Lab.) |
|
EECT 2437 (4 Credit Hours)
Offered at MVC Wireless Telephony Systems This is a WECM Course Number. Prerequisite Recommended: EECT 1403 or EECT 1307 or EECT 1407. Course Description: Principles of wireless/cellular telephony systems to include call processing, hand-off, site analysis, antenna radiation patterns, commonly used test/maintenance equipment and access protocol. This course is cross-listed as EECT 2337. The student may register for either EECT 2337 or EECT 2437 but may receive credit for only one of the two. (3 Lec., 3 Lab.) |
|
EECT 2439 (4 Credit Hours)
Offered at MVC Communications Circuits This is a WECM Course Number. Prerequisite Recommended: CETT 1429. Course Description: This course is a study of communications systems with emphasis on amplitude modulation, frequency modulation, phase modulation, and digital pulse modulation. Discussion of several types of modulators, demodulators, receivers, transmitters, and transceivers. The student will describe the operation of communications receivers and transmitters; measure and troubleshoot communications systems; and describe the use of microwave receivers used in down-links in communications and the geographical regional transponder relationships used to communicate by cell phone. (3 Lec., 3 Lab.) |
|
ELMT 1301 (3 Credit Hours)
Offered at MVC Programmable Logic Controllers This is a WECM Course Number. Course Description: An introduction to programmable logic controllers as used in industrial environments including basic concepts, programming, applications, troubleshooting of ladder logic, and interfacing of equipment. Students will explain terminology; select hardware components; predict PLC operation based on ladder logic diagrams; program a PLC to perform various control functions. (2 Lec., 4 Lab.) |
|
ELMT 1391 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD. Special Topics in Electromechanical Technology/Technician This is a WECM Course Number. Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (2 Lec., 4 Lab.) |
|
ELMT 1402 (4 Credit Hours)
Course not offered this year at any colleges of DCCCD. Solar Photovoltaic Systems This is a WECM Course Number. Course Description: Design and installation of solar photovoltaic systems and their applications. (3 Lec., 3 Lab.) |
|
ELMT 1405 (4 Credit Hours)
Offered at EFC, MVC Basic Fluid Power This is a WECM Course Number. Course Description: Basic fluid power course covering pneumatic and hydraulic systems, fluid power symbols, operating theory, components, and basic electrical and manual controls. (3 Lec., 3 Lab.) |
|
ELMT 1411 (4 Credit Hours)
Offered at EFC Solar Fundamentals This is a WECM Course Number. Course Description: Study of heat transference, motors, pumps and other mechanical devices; solid state switches; photovoltaic plates and energy conversion; thermal dynamics; and solar energy. (3 Lec., 3 Lab.) |
|
ELMT 2239 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD. Advanced Programmable Logic Controllers This is a WECM Course Number. Course Description: Advanced applications of programmable logic controllers as used in industrial environments including concepts of programming, industrial applications, troubleshooting ladder logic, and interfacing to equipment. (1 Lec., 3 Lab.) |
|
ELMT 2433 (4 Credit Hours)
Offered at MVC Industrial Electronics This is a WECM Course Number. Prerequisite Recommended: CETT 1429. Course Description: This course is a study of devices, circuits, and systems primarily used in automated manufacturing and/or process control including computer controls and interfacing between mechanical, electrical, electronic, and computer equipment. Presentation of programming schemes. The student will describe how electronic input and output circuits are used to control automated manufacturing and/or process systems; identify basic elements used for input, output, timing, and control; define how programmable electronic systems use input data to alter output responses; troubleshoot a representative system; and demonstrate how system operation can be altered with software programming. (3 Lec., 3 Lab.) |
|
ELMT 2471 (4 Credit Hours)
Offered at EFC Alternative Energy Systems This is a Local Need Course. Course Description: A study of residential and commercial business solar and wind turbine on site power generation. The course will emphasize the electrical/electronic skills needed for the installation and service/repair of such alternative energy systems. Hands-on lab experiences in installation processes will be part of the course. (3 Lec., 3 Lab.) |
|
HYDR 1345 (3 Credit Hours)
Offered at RLC Hydraulics and Pneumatics This is a WECM Course Number. Course Description: Discussion of the fundamentals of hydraulics and pneumatics, components of each system, and the operations, maintenance, and analysis of each system. (2 Lec., 4 Lab.) |
|
HYDR 1445 (4 Credit Hours)
Offered at EFC, MVC, RLC Hydraulics and Pneumatics This is a WECM Course Number. Course Description: Fundamentals of hydraulics and types of hydraulic pumps, cylinders, valves, motors, and related systems including operations, maintenance, and system analysis. (3 Lec., 3 Lab.) |
|
ITNW 1192 (1 Credit Hours)
Offered at BHC, CVC, EFC, ECC, MVC, NLC, RLC Special Topics in Computer Systems Networking and Telecommunications This is a WECM Course Number. Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (1 Lec.) |
|
ITNW 1274 (2 Credit Hours)
Offered at ECC Managing Web Site Development Projects This is a Local Need Course. Prerequisite Recommended: Successful completion of all Semester I Internet Development Technologies core curriculum or equivalent experiences approved by instructor consent. Course Description: This course provides an introduction to the complexities of managing Web site development projects. Students will learn cost specification, budgeting, schedule construction, negotiation, team-building, time management and status reporting skills. Legal issues like intellectual property rights, contract agreements, ethics and confidentiality will be described. (2 Lec.) |
|
ITNW 1280 (2 Credit Hours)
Offered at BHC, MVC Cooperative Education - Computer Systems Networking and Telecommunications This is a WECM Course Number. Prerequisite Recommended: Instructor approval prior to enrollment. Course Description: Career-related activities, encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 10 Ext.) |
|
ITNW 1281 (2 Credit Hours)
Offered at BHC, CVC, MVC Cooperative Education - Computer Systems Networking and Telecommunications This is a WECM Course Number. Prerequisite Recommended: Instructor approval prior to enrollment. Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 10 Ext.) |
|
ITNW 1292 (2 Credit Hours)
Offered at BHC, MVC Special Topics in Computer Systems Networking and Telecommunications This is a WECM Course Number. Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (2 Lec.) |
|
ITNW 1308 (3 Credit Hours)
Offered at BHC, CVC, MVC Implementing and Supporting Client Operating Systems This is a WECM Course Number. Prerequisite Recommended: Basic networking course, networking experience or instructor approval. Course Description: Skills development in the management of client as desktop operating systems. (2 Lec., 4 Lab.) |
|
ITNW 1316 (3 Credit Hours)
Offered at MVC Network Administration This is a WECM Course Number. Prerequisite Recommended: Prior networking course, networking experience or instructor approval. Course Description: An introduction to Network administration. This course is cross-listed as ITNW 1416. The student may register for either ITNW 1316 or ITNW 1416 but may receive credit for only one of the two. This course may be repeated if topics and learning outcomes vary. (2 Lec., 4 Lab.) |
|
ITNW 1325 (3 Credit Hours)
Offered at BHC, MVC Fundamentals of Networking Technologies This is a WECM Course Number. Course Description: Instruction in networking technologies and their implementation. Topics include the OSI reference model, network protocols, transmission media, and networking hardware and software. This course is cross-listed as ITNW 1425. The student may register for either ITNW 1325 or ITNW 1425 but may receive credit for only one of the two. (2 Lec., 4 Lab.) |
|
ITNW 1345 (3 Credit Hours)
Offered at BHC, CVC, MVC Implementing Network Directory Services This is a WECM Course Number. Prerequisite Recommended: ITNW 1354 or instructor approval. Course Description: Provides students with the knowledge and skills necessary to install, configure, and administer Network Directory service. (2 Lec., 4 Lab.) |
|
ITNW 1351 (3 Credit Hours)
Offered at BHC, MVC Fundamentals of Wireless LANs This is a WECM Course Number. Prerequisite Recommended: Prior networking course, networking experience or instructor approval. Course Description: Design, plan, implement, operate, and troubleshoot Wireless Local Area Networks (WLANs). Includes WLAN design, installation, and configuration; and WLAN security issues and vendor interoperability strategies. This course is cross-listed as ITNW 1451. The student may register for either ITNW 1351 or ITNW 1451 but may receive credit for only one of the two. (2 Lec., 4 Lab.) |
|
ITNW 1353 (3 Credit Hours)
Offered at BHC, MVC Supporting Network Server Infrastructure This is a WECM Course Number. Prerequisite Recommended: Prior networking course, networking experience or instructor approval. Course Description: Installing, configuring, managing, and supporting a network infrastructure. This course may be repeated if topics and learning outcomes vary. (2 Lec., 4 Lab.) |
|
ITNW 1354 (3 Credit Hours)
Offered at BHC, CVC, MVC Implementing and Supporting Servers This is a WECM Course Number. Prerequisite Recommended: Basic networking course, networking experience or instructor approval. Course Description: Implement, administer, and troubleshoot information systems that incorporate servers in a networked computing environment. (2 Lec., 4 Lab.) |
|
ITNW 1358 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD. Network+ This is a WECM Course Number. Prerequisite Recommended: Prior networking course, networking experience or instructor approval. Course Description: Assists individuals in preparing for the Computing Technology Industry Association (CompTIA) Network+ certification exam and career as a network professional. This course is cross-listed as ITNW 1458. The student may register for either ITNW 1358 or ITNW 1458 but may receive credit for only one of the two. (2 Lec., 4 Lab.) |
|
ITNW 1380 (3 Credit Hours)
Offered at BHC, CVC, EFC, MVC Cooperative Education - Computer Systems Networking and Telecommunications This is a WECM Course Number. Prerequisite Recommended: Instructor approval prior to enrollment. Course Description: Career-related activities, encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 20 Ext.) |
|
ITNW 1392 (3 Credit Hours)
Offered at BHC, CVC, MVC Special Topics in Computer Systems Networking and Telecommunications This is a WECM Course Number. Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (2 Lec., 2 Lab.) |
|
ITNW 1408 (4 Credit Hours)
Offered at BHC, CVC, ECC, MVC, NLC, RLC Implementing and Supporting Client Operating Systems This is a WECM Course Number. Prerequisite Recommended: Basic networking course, networking experience or instructor approval. Course Description: Skills development in the management of client as desktop operating systems. (3 Lec., 4 Lab.) |
|
ITNW 1413 (4 Credit Hours)
Offered at BHC, CVC, EFC, ECC, MVC, NLC, RLC Computer Virtualization This is a WECM Course Number. Prerequisite Recommended: ITNW 1425 or instructor approval. Course Description: Implement and support virtualization of clients in a networked computing environment. This course explores installation, configuration, and management of computer virtualization workstation and servers. (3 Lec., 4 Lab.) |
|
ITNW 1416 (4 Credit Hours)
Offered at MVC Network Administration This is a WECM Course Number. Prerequisite Recommended: Prior networking course, networking experience or instructor approval. Course Description: An introduction to Network administration. This course is cross-listed as ITNW 1316. The student may register for either ITNW 1316 or ITNW 1416 but may receive credit for only one of the two. This course may be repeated if topics and learning outcomes vary. (3 Lec., 4 Lab.) |
|
ITNW 1425 (4 Credit Hours)
Offered at BHC, CVC, EFC, ECC, MVC, NLC, RLC Fundamentals of Networking Technologies This is a WECM Course Number. Course Description: Instruction in networking technologies and their implementation. Topics include the OSI reference model, network protocols, transmission media, and networking hardware and software. This course is cross-listed as ITNW 1325. The student may register for either ITNW 1325 or ITNW 1425 but may receive credit for only one of the two. (3 Lec., 4 Lab.) |
|
ITNW 1435 (4 Credit Hours)
Offered at ECC, NLC, RLC Information Storage and Management This is a WECM Course Number. Course Description: An introduction to data storage-related technologies. Topics include data storage for cloud, Big Data, mobile, social media, and software-defined data centers. Provides a strong understanding of storage technologies and prepares students for advanced concepts, technologies, and processes. (3 Lec., 4 Lab.) |
|
ITNW 1437 (4 Credit Hours)
Offered at BHC, CVC, EFC, ECC, MVC Introduction to the Internet This is a WECM Course Number. Course Description: Introduction to the Internet with emphasis on using the World Wide Web to locate, transfer, and publish information. Survey of emerging technologies on the Internet. (3 Lec., 4 Lab.) |
|
ITNW 1440 (4 Credit Hours)
Offered at ECC, NLC, RLC Desktop Virtualization This is a WECM Course Number. Course Description: Installation and configuration of desktop virtualization components. (3 Lec., 4 Lab.) |
|
ITNW 1445 (4 Credit Hours)
Offered at BHC, CVC, MVC Implementing Network Directory Services This is a WECM Course Number. Prerequisite Recommended: ITNW 1448 or instructor approval. Course Description: Provides students with the knowledge and skills necessary to install, configure, and administer Network Directory service. (3 Lec., 4 Lab.) |
|
ITNW 1451 (4 Credit Hours)
Offered at BHC, ECC, MVC Fundamentals of Wireless LANs This is a WECM Course Number. Prerequisite Recommended: Prior networking course, networking experience or instructor approval. Course Description: Design, plan, implement, operate, and troubleshoot Wireless Local Area Networks (WLANs). Includes WLAN design, installation, and configuration; and WLAN security issues and vendor interoperability strategies. This course is cross-listed as ITNW 1351. The student may register for either ITNW 1351 or ITNW 1451 but may receive credit for only one of the two. (3 Lec., 4 Lab.) |
|
ITNW 1453 (4 Credit Hours)
Offered at BHC, MVC Supporting Network Server Infrastructure This is a WECM Course Number. Prerequisite Recommended: Prior networking course, networking experience or instructor approval. Course Description: Installing, configuring, managing, and supporting a network infrastructure This course may be repeated if topics and learning outcomes vary. (3 Lec., 4 Lab.) |
|
ITNW 1454 (4 Credit Hours)
Offered at BHC, MVC Implementing and Supporting Servers This is a WECM Course Number. Prerequisite Recommended: Basic networking and client operating system essentials skills or instructor approval. Course Description: Implement, administer, and troubleshoot information systems that incorporate servers in a networked computing environment. (3 Lec., 4 Lab.) |
|
ITNW 1458 (4 Credit Hours)
Offered at BHC, ECC, MVC Network+ This is a WECM Course Number. Prerequisite Recommended: Prior networking course, networking experience or instructor approval. Course Description: Assists individuals in preparing for the Computing Technology Industry Association (CompTIA) Network+ certification exam and career as a network professional. This course is cross-listed as ITNW 1358. The student may register for either ITNW 1358 or ITNW 1458 but may receive credit for only one of the two. (3 Lec., 4 Lab.) |
|
ITNW 1480 (4 Credit Hours)
Offered at BHC, MVC Cooperative Education - Computer Systems Networking and Telecommunications This is a WECM Course Number. Prerequisite Recommended: Instructor approval prior to enrollment. Course Description: Career-related activities, encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 30 Ext.) |
|
ITNW 1492 (4 Credit Hours)
Offered at BHC, CVC, ECC, MVC, NLC, RLC Special Topics in Computer Systems Networking and Telecommunications This is a WECM Course Number. Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (3 Lec., 4 Lab.) |
|
ITNW 2281 (2 Credit Hours)
Course not offered this year at any colleges of DCCCD. Cooperative Education - Computer Systems Networking and Telecommunications This is a WECM Course Number. Course Description: Career-related activities encountered in the student's area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. (1 Lec., 10 Ext.) |
|
ITNW 2312 (3 Credit Hours)
Offered at BHC, MVC Routers This is a WECM Course Number. Prerequisite Recommended: Prior networking course, networking experience or instructor approval. Course Description: Router configuration for local area networks and wide area networks. Includes Internet Protocol (IP) addressing techniques and intermediate routing protocols. This course is cross-listed as ITNW 2412. The student may register for either ITNW 2312 or ITNW 2412 but may receive credit for only one of the two. (2 Lec., 4 Lab.) |
|
ITNW 2313 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD. Networking Hardware This is a WECM Course Number. Prerequisite Recommended: Prior networking course, experience or instructor approval. Course Description: Maintain network hardware devices. Topics include network cables, servers, and workstations; network connectivity devices such as routers, hubs, bridges, gateways, repeaters, and uninterruptible power supplies; and other networking hardware devices. This course may be repeated if topics and learning outcomes vary. (3 Lec.) |
|
ITNW 2321 (3 Credit Hours)
Course not offered this year at any colleges of DCCCD. Networking with TCP/IP This is a WECM Course Number. Prerequisite Recommended: Prior networking course, networking experience or instructor approval. Course Description: Set up, configure, use, and support Transmission Control Protocol/Internet Protocol (TCP/IP) on networking operating systems. This course may be repeated if topics and learning outcomes vary. (3 Lec.) |
|
ITNW 2332 (3 Credit Hours)
Offered at BHC, CVC, MVC UNIX Network Integration This is a WECM Course Number. Prerequisite Recommended: ITSC 2437 or instructor approval. Course Description: Installation, configuration, management, and support of a network infrastructure in a large computing environment that uses a version of the UNIX server operating system. (2 Lec., 4 Lab.) |
|
ITNW 2350 (3 Credit Hours)
Offered at BHC, CVC, MVC Enterprise Network This is a WECM Course Number. Prerequisite Recommended: Advanced convergence, CISCO, or VoIP experience or instructor approval. Course Description: A case study in Convergence Technologies requiring a network engineer to study a problem and design a network solution for an enterprise network. This course is cross-listed as ITNW 2450. The student may register for either ITNW 2350 or ITNW 2450 but may receive credit for only one of the two. (2 Lec., 4 Lab.) |
|
ITNW 2354 (3 Credit Hours)
Offered at BHC, MVC Internet/Intranet Server This is a WECM Course Number. Prerequisite Recommended: Prior networking course, networking experience or instructor approval. Course Description: Designing, installing, configuring, maintaining, and managing an Internet/Intranet server. This course may be repeated if topics and learning outcomes vary. (2 Lec., 4 Lab.) |
|
ITNW 2412 (4 Credit Hours)
Offered at BHC, MVC Routers This is a WECM Course Number. Prerequisite Recommended: Prior networking course, networking experience or instructor approval. Course Description: Router configuration for local area networks and wide area networks. Includes Internet Protocol (IP) addressing techniques and intermediate routing protocols. This course is cross-listed as ITNW 2412. The student may register for either ITNW 2312 or ITNW 2412 but may receive credit for only one of the two. (3 Lec., 4 Lab.) |
|
ITNW 2413 (4 Credit Hours)
Offered at BHC, MVC Networking Hardware This is a WECM Course Number. Prerequisite Recommended: Prior networking course, experience or instructor approval. Course Description: Maintain network hardware devices. Topics include network cables, servers, and workstations; network connectivity devices such as routers, hubs, bridges, gateways, repeaters, and uninterruptible power supplies; and other networking hardware devices. This course may be repeated if topics and learning outcomes vary. (3 Lec., 4 Lab.) |
|
ITNW 2421 (4 Credit Hours)
Offered at BHC, MVC Networking with TCP/IP This is a WECM Course Number. Prerequisite Recommended: Prior networking course, networking experience or instructor approval. Course Description: Set up, configure, use, and support Transmission Control Protocol/Internet Protocol (TCP/IP) on networking operating systems. This course may be repeated if topics and learning outcomes vary. (3 Lec., 4 Lab.) |
|
ITNW 2435 (4 Credit Hours)
Offered at BHC, MVC Network Troubleshooting and Support This is a WECM Course Number. Prerequisite Recommended: Prior networking course, networking experience or instructor approval. Course Description: Troubleshoot and support networks with emphasis on solving real world problems in a hands-on environment. Topics include troubleshooting and research techniques, available resources, and network management hard/software. This course may be repeated if topics and learning outcomes vary. (3 Lec., 4 Lab.) |
|
ITNW 2450 (4 Credit Hours)
Offered at BHC, CVC, ECC, MVC Enterprise Network This is a WECM Course Number. Prerequisite Recommended: Advanced convergence, CISCO, or VoIP experience or instructor approval. Course Description: A case study in Convergence Technologies requiring a network engineer to study a problem and design a network solution for an enterprise network. This course is cross-listed as ITNW 2350. The student may register for either ITNW 2350 or ITNW 2450 but may receive credit for only one of the two. (3 Lec., 4 Lab.) |
|
ITNW 2452 (4 Credit Hours)
Offered at BHC, CVC, MVC Administering SQL Server This is a WECM Course Number. Prerequisite Recommended: ITNW 1408 or instructor approval. Course Description: Administering SQL Server is a skills development course in the installation, configuration, administration, and troubleshooting of SQL Servers client/server database management system version. (3 Lec., 4 Lab.) |
|
ITNW 2454 (4 Credit Hours)
Offered at BHC, ECC, MVC Internet/Intranet Server This is a WECM Course Number. Prerequisite Recommended: Prior networking course, networking experience or instructor approval. Course Description: Designing, installing, configuring, maintaining, and managing an Internet server. This course may be repeated if topics and learning outcomes vary. (3 Lec., 4 Lab.) |
|
ITNW 2455 (4 Credit Hours)
Offered at ECC, NLC, RLC Server Virtualization This is a WECM Course Number. Course Description: An in-depth study of the installation, configuration, management and troubleshooting of a virtualized server environment. (3 Lec., 4 Lab.) |
|
ITNW 2455 (4 Credit Hours)
Offered at ECC, NLC, RLC Server Virtualization This is a WECM Course Number. Course Description: An in-depth study of the installation, configuration, management and troubleshooting of a virtualized server environment. (3 Lec., 4 Lab.) |
|
ITNW 2456 (4 Credit Hours)
Offered at BHC, CVC, MVC Designing a Network Directory Infrastructure This is a WECM Course Number. Prerequisite Recommended: Prior networking course, networking experience or instructor approval. Course Description: Design, implement, and support a network directory infrastructure in a multi-domain environment. (3 Lec., 4 Lab) |
|
ITNW 2459 (4 Credit Hours)
Offered at MVC Web Server Support and Maintenance This is a WECM Course Number. Prerequisite Recommended: Prior networking course, networking experience or instructor approval. Course Description: Instruction in the installation, configuration, and implementation of web servers. (3 Lec., 4 Lab.) |
|
ITNW 2471 (4 Credit Hours)
Offered at BHC, CVC, ECC, MVC, RLC Server Virtualization: Optimize and Scale This is a Local Need Course. Prerequisite Recommended: ITNW 1413 or instructor approval. Course Description: Configuring and maintaining a highly available and scalable virtual infrastructure using commonly available virtualization software. (3 Lec., 4 Lab.) |
|
ITNW 2472 (4 Credit Hours)
Offered at BHC, CVC, ECC, MVC, RLC Virtual Datacenter Design This is a Local Need Course. Prerequisite Recommended: ITNW 2471 or instructor approval. Course Description: Designing a virtual infrastructure which meets an organization’s constraints, requirements and business objectives concerning availability, scalability, manageability, and security (3 Lec., 4 Lab.) |
|
ITNW 2473 (4 Credit Hours)
Offered at BHC, CVC, ECC, MVC, RLC Desktop Virtualization This is a Local Need Course. Prerequisite Recommended: ITNW 2472 or instructor approval. Course Description: Installation and configuration of desktop virtualization components. (3 Lec., 4 Lab.) |
|
LOTT 1401 (4 Credit Hours)
Offered at EFC Introduction to Fiber Optics This is a WECM Course Number. Course Description: An introductory course in fiber optics and its application including advantages of fiber, light transmission in fiber, types of fiber, sources, detectors, and connectors. (3 Lec., 3 Lab.) |
|
QCTC 1243 (2 Credit Hours)
Offered at MVC Quality Assurance This is a WECM Course Number. Prerequisite Recommended: Credit or concurrent enrollment in MATH 1414 or the equivalent. Course Description: Principles and applications designed to introduce quality assurance. (2 Lec., 1 Lab.) |
|
QCTC 1301 (3 Credit Hours)
Offered at CVC Total Quality Management This is a WECM Course Number. Course Description: The study of integrating work processes using team participation through employee empowerment and teamwork emphasizing the philosophy of customer service and satisfaction. (3 Lec., 1 Lab.) |
|
QCTC 1343 (3 Credit Hours)
Offered at ECC Quality Assurance This is a WECM Course Number. Prerequisite Recommended: Credit or concurrent enrollment in MATH 1414 or the equivalent. Course Description: Principles and applications designed to introduce quality assurance. (3 Lec.) |
|
RBTC 2445 (4 Credit Hours)
Offered at MVC Robot Application, Set-Up And Testing This is a WECM Course Number. Course Description: This is a capstone course that provides the student with laboratory experience in the installation, set-up, and testing of robotic cells. Topics include maintenance. The student will demonstrate familiarity with hardwiring and interfacing PLCs, robots, CNC equipment, and support equipment; troubleshoot and debug equipment to make it function in a live automated environment; and apply design techniques to maintain maximum cycle times on an automated system. (3 Lec., 3 Lab.) |
|
SMFT 1343 (3 Credit Hours)
Offered at RLC Semiconductor Manufacturing Technology This is a WECM Course Number. Course Description: A study of the processes, materials, and equipment used in the manufacturing of semiconductors, including an overview of the semiconductor industry, related terminology, and standard safety practice. (2 Lec., 2 Lab.) |
Academic Courses
Designated by the Texas Higher Education Coordinating Board for transfer among community colleges and state public four year colleges and universities as freshman and sophomore general education courses.
WECM Courses
Designated by the Texas Higher Education Coordinating Board as workforce education (technical) courses offered for credit and CEUs (Continuing Education Units). While these courses are designed to transfer among state community colleges, they are not designed to automatically transfer to public four-year colleges and universities.
Designated by the Texas Higher Education Coordinating Board for transfer among community colleges and state public four year colleges and universities as freshman and sophomore general education courses.
WECM Courses
Designated by the Texas Higher Education Coordinating Board as workforce education (technical) courses offered for credit and CEUs (Continuing Education Units). While these courses are designed to transfer among state community colleges, they are not designed to automatically transfer to public four-year colleges and universities.
